Light Bar / Push Bumper setup
Moderators: Helpinators, Moderators
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: Light Bar / Push Bumper setup
I'm working on a front push-bar and light set for my Legacy as well..
The rear tire-bar I made...
This is because I trimmed some bodywork back and reduced the rear tire well to just deep enough for the tool box to fit...
The rear tire-bar I made...
This is because I trimmed some bodywork back and reduced the rear tire well to just deep enough for the tool box to fit...
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
Re: Light Bar / Push Bumper setup
Dang...that's awesome! Got any dimensions or anything for it? I dont have a welder, but my neighbor does.race_to_live wrote:http://bbs.legacycentral.org/viewtopic. ... ar#p346505
I have a few pics on there
Re: Light Bar / Push Bumper setup
Oh, believe me, I've been watching your progress. I'm pretty freakin jealous of your car too hahaLegacy Rally Guy wrote:I'm working on a front push-bar and light set for my Legacy as well..
The rear tire-bar I made...
This is because I trimmed some bodywork back and reduced the rear tire well to just deep enough for the tool box to fit...
/IMAG0203.jpg[/img]
I've actually been wanting to build an offroad machine and I've been looking at yours for ideas.
I love the spare tire over the trunk. Frees up a ton of space.
I've been wanting to make a rear tire swing for my Legacy like the Impreza's Gravel Express version.
-
- First Gear
- Posts: 173
- Joined: Fri Aug 08, 2008 5:16 am
- Location: Pueblo CO
Re: Light Bar / Push Bumper setup
Ill have to take some close up pics and measure it.ill take pics of where it mounts too.SWRT wrote:Dang...that's awesome! Got any dimensions or anything for it? I dont have a welder, but my neighbor does.race_to_live wrote:http://bbs.legacycentral.org/viewtopic. ... ar#p346505
I have a few pics on there
-91ss, 250,000mi rebuilt, tmic, tdo4, agx's w/groundcontrol, f/r strut bars, rust
-83 gl wagon...350,000mi custom dents
-62 honda 55, (moped)
-74 Yamaha rd 350
-83 gl wagon...350,000mi custom dents
-62 honda 55, (moped)
-74 Yamaha rd 350
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: Light Bar / Push Bumper setup
Wow! Thank you! I am surprised really, I've a few people that have commented, but that's it. So far, so good on it. Things should happen a little faster, I've a job again! It gives me a bit more momentum really, to know people like it!SWRT wrote:
Oh, believe me, I've been watching your progress. I'm pretty freakin jealous of your car too haha
I've actually been wanting to build an offroad machine and I've been looking at yours for ideas.
I love the spare tire over the trunk. Frees up a ton of space.
I've been wanting to make a rear tire swing for my Legacy like the Impreza's Gravel Express version.
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
Re: Light Bar / Push Bumper setup
Thanks, man! I was actually thinking about it and was gonna ask if you could do that.race_to_live wrote:Ill have to take some close up pics and measure it.ill take pics of where it mounts too.SWRT wrote:Dang...that's awesome! Got any dimensions or anything for it? I dont have a welder, but my neighbor does.race_to_live wrote:http://bbs.legacycentral.org/viewtopic. ... ar#p346505
I have a few pics on there
Do they stay pretty stable?
Re: Light Bar / Push Bumper setup
Do you own that garage? Everything you're doing looks like fun. I wish I had a place like that that I could work and I wish I knew how to weld...that'd help. There's so much stuff like that I would be doing with a spare Legacy or Impreza. I want to sell my 98 RS and make an offroad Legacy Wagon or early model Impreza. Firstly to have it as a spare car and secondly to have it as an awesome project. I cant wait to see how your car turns out, man. You've got a few fans hahaLegacy Rally Guy wrote:SWRT wrote:
Wow! Thank you! I am surprised really, I've a few people that have commented, but that's it. So far, so good on it. Things should happen a little faster, I've a job again! It gives me a bit more momentum really, to know people like it!
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: Light Bar / Push Bumper setup
Answered on my Safari Legacy thread, so not to threadjack *was a larger reply*SWRT wrote:
Do you own that garage? Everything you're doing looks like fun. I wish I had a place like that that I could work and I wish I knew how to weld...that'd help. There's so much stuff like that I would be doing with a spare Legacy or Impreza. I want to sell my 98 RS and make an offroad Legacy Wagon or early model Impreza. Firstly to have it as a spare car and secondly to have it as an awesome project. I cant wait to see how your car turns out, man. You've got a few fans haha
http://bbs.legacycentral.org/viewtopic. ... 55#p361555
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
Re: Light Bar / Push Bumper setup
Well a few months later i have finally made my light bar and got my hella's mounted. I wasnt expecting such a gap between the lights but it turns out i have enough room to fit another set if i can find some more for cheap. I dont really know the dimensions of it because it is all kind of eyeballed and made from scrap steel bar i was able to scrounge from some welding friends and a piece i found on the side of the road. Unfortunately i dont have any pictures of the process while it was apart. But basically the supports run from the radiator mount holes and go out through the front of the hood, around my grill to a bracket. I drilled a hole into my bumper beam and just screwed the bracket in there. Its kind of hard to tell from the pictures but there is also a horizontal bar that connects both sides for extra stability. Its a pretty solid set up and i havent noticed any vibrations but i also havent gone off road with them yet and that is the real test. I swapped out the stock 55w bulbs for some 100w bulbs. In a previous build i used the 150w lights and they actually melted the light housing to the point i couldnt use them anymore. So i stuck to the medium level.
1990 NA 2.2 Open Light rally car
Re: Light Bar / Push Bumper setup
I've seen that idea done before, but never to that degree
Looks nice, man. The extra lights would really tie it all in too.
Looks nice, man. The extra lights would really tie it all in too.
-
- Knowledgeable
- Posts: 9809
- Joined: Mon Jun 16, 2003 11:20 pm
- Location: Beverly, MA
Re: Light Bar / Push Bumper setup
More solid with the reach over brackets than I did mine. I used adjustable standoffs with rubber stoppers on one end to be able to aim them vertically. Worked, but they'd still bounce on bumps.
Midnight in a Perfect World on Amazon or order anywhere. The first book in a quartet chronicling the rise of a man from angry criminal to philanthropist. Midnight... is a distopic noirish novel featuring 'Duchess', a modified 1990 Subaru Legacy wagon.
Re: Light Bar / Push Bumper setup
Yeah i came to the probablem of aiming them vertically after i had already assembled them unfortuneatly. Was something i should have thought of but didnt. I had to take a metal file and grind down a small section of the bracket so i could have some clearance. Didnt have to take that much off luckily.
1990 NA 2.2 Open Light rally car
-
- First Gear
- Posts: 195
- Joined: Mon Aug 11, 2008 12:33 am
- Location: Chandler, az
Re: Light Bar / Push Bumper setup
Ya, ive gone over plans with a fabricator to do a psyudo rally setup on my dd and just skidplating the whole underside. Also, a front lightbar for a set of 5 1/2" hids. Running 1 1/4" tubing in front of my bumper, and out far enough to clear my intercooler. Right now ive got a set plated on bottom and through my enlarged opening. kinda like this, so it provides protection as well. I put my standup jetski in my car, and rally down to the cove. Sometimes, i like to jump and have fun on the way, so i need to have a strong car. Food for thought, my $.02.
WagonMafia
-Pure White 93 L Wagon converted to Turbo Wagon (almost complete)
-Pure White 92 SS parts car (doner) donated to friend
-91 Mazda miata drifto DD
http://photobucket.com/wagonmafia
-Pure White 93 L Wagon converted to Turbo Wagon (almost complete)
-Pure White 92 SS parts car (doner) donated to friend
-91 Mazda miata drifto DD
http://photobucket.com/wagonmafia
Re: Light Bar / Push Bumper setup
My neighbor that was gonna help me with a push bumper is moving next weekend so it's back the drawing board. May just use some angle iron and bolt it to the bumper where the grille goes.
Re: Light Bar / Push Bumper setup
Pretty sure everyone has seen my light bar but I figured I should post it in the right thread lol.
First picture is the first light bar I made, all the other pictures are of version two as I made progress on it. And the last picture is how it sits today, no changes planned untill I go all out and build a whole tubing front bumper.
Even though this is an old post, I figured I would post my final light set up.
First picture is the first light bar I made, all the other pictures are of version two as I made progress on it. And the last picture is how it sits today, no changes planned untill I go all out and build a whole tubing front bumper.
Even though this is an old post, I figured I would post my final light set up.
Danny
1994 Legacy Turbo wagon: rwd, 4eat, and a faint knock..
1992 Legacy postal: bone stock, 4eat, blown reverse.
1993 Legacy LS Awd: lifted, 4eat, higher mileage, and dirty.biggreen96 wrote:well get out there and smash that geo around and get comfy.
1994 Legacy Turbo wagon: rwd, 4eat, and a faint knock..
1992 Legacy postal: bone stock, 4eat, blown reverse.
-
- Fifth Gear
- Posts: 2385
- Joined: Tue Mar 13, 2007 12:56 am
- Location: 10-9-oh(!), wa
Re: Light Bar / Push Bumper setup
Saw this at WCSS. The owner stated that it came off of a Toyota pickup and that the mounts were modified to bolt to the tow hooks on the bottom of the chassis and the bumper. It looked pretty stout, but I wonder what it would do in any kind of impact.
93 legacy wagon L, 22T swapped (TW imitator) now with five forward speeds. (Gone, but never forgotten)
johndrivesabox wrote: Rally, my kyboard is brok, his has nohing o do wih h liquor.
Originalcyn wrote:Apparently everyone hates Gabe.
Re: Light Bar / Push Bumper setup
Here's my light set up, I put it in the factory location for a roof rack even tho mine didn't have one.
Charles
90' White/Gray Outback DD workhorse (670,xxx) miles
92' Onyx Metallic (430,xxx) Wife's DD
68' Barracuda formula S 340 4spd coupe (ongoing project)
66' Mustang 2+2 4spd wife's (ongoing project)
90' White/Gray Outback DD workhorse (670,xxx) miles
92' Onyx Metallic (430,xxx) Wife's DD
68' Barracuda formula S 340 4spd coupe (ongoing project)
66' Mustang 2+2 4spd wife's (ongoing project)
Re: Light Bar / Push Bumper setup
I'm wondering how this is turning outLegacy Rally Guy wrote:Wow! Thank you! I am surprised really, I've a few people that have commented, but that's it. So far, so good on it. Things should happen a little faster, I've a job again! It gives me a bit more momentum really, to know people like it!SWRT wrote:
Oh, believe me, I've been watching your progress. I'm pretty freakin jealous of your car too haha
I've actually been wanting to build an offroad machine and I've been looking at yours for ideas.
I love the spare tire over the trunk. Frees up a ton of space.
I've been wanting to make a rear tire swing for my Legacy like the Impreza's Gravel Express version.
Re: Light Bar / Push Bumper setup
You custom made a roof rack?rallyak wrote:Here's my light set up, I put it in the factory location for a roof rack even tho mine didn't have one.
I know I said it in another post, but your paint
setup is freakin awesome
Re: Light Bar / Push Bumper setup
Yeah Some pipe, a little bend here and there, weld it all together and even had it powder coated. I tryed using a stock roof rack but it wasn't strong enough to hold the large Hella's.
Thanks on the paint comment.
Thanks on the paint comment.
Charles
90' White/Gray Outback DD workhorse (670,xxx) miles
92' Onyx Metallic (430,xxx) Wife's DD
68' Barracuda formula S 340 4spd coupe (ongoing project)
66' Mustang 2+2 4spd wife's (ongoing project)
90' White/Gray Outback DD workhorse (670,xxx) miles
92' Onyx Metallic (430,xxx) Wife's DD
68' Barracuda formula S 340 4spd coupe (ongoing project)
66' Mustang 2+2 4spd wife's (ongoing project)
-
- Fifth Gear
- Posts: 2385
- Joined: Tue Mar 13, 2007 12:56 am
- Location: 10-9-oh(!), wa
Re: Light Bar / Push Bumper setup
+1 for the paint. Do you have a pic of the entire car. That is what I want to do to mine, only with the factory grey/silver on the bottom half.
Nice fab work, too.
Nice fab work, too.
93 legacy wagon L, 22T swapped (TW imitator) now with five forward speeds. (Gone, but never forgotten)
johndrivesabox wrote: Rally, my kyboard is brok, his has nohing o do wih h liquor.
Originalcyn wrote:Apparently everyone hates Gabe.
Re: Light Bar / Push Bumper setup
here's a semi front side,
Charles
90' White/Gray Outback DD workhorse (670,xxx) miles
92' Onyx Metallic (430,xxx) Wife's DD
68' Barracuda formula S 340 4spd coupe (ongoing project)
66' Mustang 2+2 4spd wife's (ongoing project)
90' White/Gray Outback DD workhorse (670,xxx) miles
92' Onyx Metallic (430,xxx) Wife's DD
68' Barracuda formula S 340 4spd coupe (ongoing project)
66' Mustang 2+2 4spd wife's (ongoing project)
Re: Light Bar / Push Bumper setup
Yeah I like the roof/light rack. Looks good!
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: Light Bar / Push Bumper setup
I'm impressed. I'll keep your design in mind whenrallyak wrote:Yeah Some pipe, a little bend here and there, weld it all together and even had it powder coated. I tryed using a stock roof rack but it wasn't strong enough to hold the large Hella's.
Thanks on the paint comment.
I go to build my car.