Front lips for an NA bumper?
Moderators: Helpinators, Moderators
-
- In Neutral
- Posts: 48
- Joined: Wed Nov 30, 2016 5:13 am
- Location: US,Pennsylvania
Front lips for an NA bumper?
Are there any lips you can fit on an NA bumper? I got one of th he 06-07 sti ones off ebay and it doesn't line up near as good as it does on a turbo bumper. Are there any that would fit better?
-
- Second Gear
- Posts: 506
- Joined: Mon Oct 06, 2008 5:25 pm
- Location: burlington, ontraio, canada
Re: Front lips for an NA bumper?
to get a better fit use a heat gun and bend the lip of your choice to the car. I attach the ends at the wheels then heat, bend, and add screws etc as I go from one side tot the other. Use the low setting on the heat gun
Silver 99 Legacy GT Wagon
White 90 BC5 RS Type RA
Black 01 Legacy Outback H6 Wagon
http://s684.beta.photobucket.com/user/d ... l/library/
White 90 BC5 RS Type RA
Black 01 Legacy Outback H6 Wagon
http://s684.beta.photobucket.com/user/d ... l/library/
-
- In Neutral
- Posts: 48
- Joined: Wed Nov 30, 2016 5:13 am
- Location: US,Pennsylvania
Re: Front lips for an NA bumper?
I already did some retro fit of a MK3 jetta lip, almost was a perfect fit with no bending and heating it up.
-
- Second Gear
- Posts: 506
- Joined: Mon Oct 06, 2008 5:25 pm
- Location: burlington, ontraio, canada
Re: Front lips for an NA bumper?
the heat and bend method will increase the choice of lips you can use. I had one from an astro/safari van fit on my 00 forester
Silver 99 Legacy GT Wagon
White 90 BC5 RS Type RA
Black 01 Legacy Outback H6 Wagon
http://s684.beta.photobucket.com/user/d ... l/library/
White 90 BC5 RS Type RA
Black 01 Legacy Outback H6 Wagon
http://s684.beta.photobucket.com/user/d ... l/library/
-
- In Neutral
- Posts: 48
- Joined: Wed Nov 30, 2016 5:13 am
- Location: US,Pennsylvania
Re: Front lips for an NA bumper?
I had talked to a friend who has a shop and mainly does bodywork/painting and he had told me if I were to heat up the STI lip, it would bubble up and would bend downward in the center, I thought that the bottom of the turbo bumper on a post lift was less squared out than an NA bumper, but then again I have never seen images of how the bottom itself looks.