Part number referrence needed

FAQs, community and board information.

Moderator: Moderators

Legacy777
Site Admin
Site Admin
Posts: 27552
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 » Tue Nov 11, 2003 12:32 am

n/a does not have a MAP.

It has a MAF and a barametric pressure sensor in the ECU.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

georryan
Fourth Gear
Posts: 2091
Joined: Thu Oct 17, 2002 1:39 am
Location: USA Roseville CA
Contact:

Post by georryan » Wed Nov 12, 2003 9:01 am

How the blazes do you recall that from memory vrg3???? :)
91 Pearl White Sport Sedan
04 Java Black Pearl Forester XT
2014 Volvo S60 T5
05 BMW R1200ST (excellent commuter when I don't have the pup with me)

87 Grey GL-10 Sedan (so long old buddy) - donated
97 Toyota 4Runner SR5 - sold
2002 BMW r1150rt-p - sold

vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 » Wed Nov 12, 2003 3:51 pm

I spent a long time playing with the sensors on my desk. I can also recall ECU and MAF part numbers from memory.

In looking over this thread I notice that I never posted a link to my part number list on the web:

http://www.graphics.cornell.edu/~v/partnumbers.html
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212

boostjunkie
Knowledgeable
Knowledgeable
Posts: 1770
Joined: Mon Dec 16, 2002 3:20 pm
Location: Owings Mills, MD
Contact:

Post by boostjunkie » Wed Nov 12, 2003 5:08 pm

Nice!

On question. You only have a listing for one turbo legacy headgasket. I thought the gaskets were side-dependent? Meaning that there's a different gasket for the right and left heads because of some extra oil and water lines running through the passenger side head for the turbo.

I could be wrong, tho.
[url=http://www.angelfire.com/md3/91turbolegacy/images/On_the_Lawn.jpg]1991 Legacy Turbo (RIP)[/url]

[url=http://www.angelfire.com/md3/91turbolegacy/images/Summer_Car_Wash3.jpg]2000 Celica GT-S[/url]

vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 » Wed Nov 12, 2003 5:17 pm

I don't think the actual mating surfaces are different; it's just that the coolant and oil take a different path through the head. I'm not positive, and I don't recall the source of that part number, so you may be right... maybe someone who's actually removed the heads can chime in.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212

THAWA
Knowledgeable
Knowledgeable
Posts: 6829
Joined: Thu Aug 21, 2003 7:44 pm
Location: Sacramento, CA
Contact:

Post by THAWA » Wed Dec 24, 2003 9:33 am

anyone know the partnumber for headlamp washers/switch?
Rio Red 90 Legacy LS AWD 174k
Liquid Silver 92 SVX LS-L 88k
[url=http://folding.amdmbpond.com/FoldingForOurFuture.html]Do you fold?[/url]

I'm on First and First. How can the same street intersect with itself? I must be at the nexus of the universe.

mikec
Third Gear
Posts: 893
Joined: Tue Jan 21, 2003 8:27 pm
Location: Toronto, Ontario
Contact:

Post by mikec » Sun Feb 29, 2004 2:53 am

Didn't see these listed, and since I've got the bags in front of me....

Valve cover gaskets - 13294AA012
Valve cover bolt washers - 13271AA051 (3 per side)
Oil filler tube o-ring - 806923060 (its a 23.7x3.5 o-ring if you're looking for an even cheaper replacement)
"That shouldn't be a problem, since I do regularly visit the realm of subatmospheric manifold pressures." -- vrg3

huck369
In Neutral
Posts: 33
Joined: Fri Jun 20, 2003 2:40 am
Location: Somerset, KY

Post by huck369 » Mon Mar 01, 2004 2:45 pm

You can look up all the parts at
www.1stsubaruparts.com/
They've got decent prices...but don't give you the part numbers...

hope you guys find it helpful
[b]Huck[/b]
03 Impreza RS 5-Speed
89 XT-6 AWD 5-Speed Pearly (EG33 Powered aka FrankenWedge)
99 Forester S 5
94 Impreza Coupe
92 SVX LS-Tour RWD 5-Speed

ciper
Knowledgeable
Knowledgeable
Posts: 4387
Joined: Tue Oct 15, 2002 8:16 pm
Location: SFCA

Post by ciper » Mon Mar 01, 2004 7:45 pm

Someone should search through the entire thread and consoldiate the part numbers to the top.
Last edited by ciper on Tue Mar 02, 2004 5:14 am, edited 1 time in total.

THAWA
Knowledgeable
Knowledgeable
Posts: 6829
Joined: Thu Aug 21, 2003 7:44 pm
Location: Sacramento, CA
Contact:

Post by THAWA » Tue Mar 02, 2004 5:13 am

Rio Red 90 Legacy LS AWD 174k
Liquid Silver 92 SVX LS-L 88k
[url=http://folding.amdmbpond.com/FoldingForOurFuture.html]Do you fold?[/url]

I'm on First and First. How can the same street intersect with itself? I must be at the nexus of the universe.

THAWA
Knowledgeable
Knowledgeable
Posts: 6829
Joined: Thu Aug 21, 2003 7:44 pm
Location: Sacramento, CA
Contact:

Post by THAWA » Sun Apr 25, 2004 3:31 am

looked in this thread again just for clutch fork number, :D anyway about the headgasket thing, I dunno about the turbo version but na use the same exact gaskets on both sides. Then again the na also uses the same exact heads on both sides. But yes allow me to be useful:
USDM BOV/BPV: 14471aa001
JDM Turbo inlet rubber boot: 46023fa000

:D
Rio Red 90 Legacy LS AWD 174k
Liquid Silver 92 SVX LS-L 88k
[url=http://folding.amdmbpond.com/FoldingForOurFuture.html]Do you fold?[/url]

I'm on First and First. How can the same street intersect with itself? I must be at the nexus of the universe.

THAWA
Knowledgeable
Knowledgeable
Posts: 6829
Joined: Thu Aug 21, 2003 7:44 pm
Location: Sacramento, CA
Contact:

Post by THAWA » Tue May 11, 2004 12:25 am

Clutch pedal spring kit: x3601aa000
it includes a spring: 3603711032
Two bushings: 36013ga050
Two washers and two pins, which aren't labeled.
Rio Red 90 Legacy LS AWD 174k
Liquid Silver 92 SVX LS-L 88k
[url=http://folding.amdmbpond.com/FoldingForOurFuture.html]Do you fold?[/url]

I'm on First and First. How can the same street intersect with itself? I must be at the nexus of the universe.

Legacy777
Site Admin
Site Admin
Posts: 27552
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 » Tue May 18, 2004 5:05 pm

vrg3,

Just curious where you got your info regarding the select monitor cartridges?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 » Tue May 18, 2004 5:09 pm

It was in a TSB, I think. I don't recall now. The cartridges that I have do pretty much match up with those part numbers.

[edit] Here you go: http://www.graphics.cornell.edu/~v/pics ... 195-01.png

It's got part numbers for some earlier and later Subarus, too.[/edit]
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212

Legacy777
Site Admin
Site Admin
Posts: 27552
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 » Tue May 18, 2004 7:28 pm

If you look at that chart.....look where the X is. It's on the EPS or air suspension. That cartridge will diagnose air suspensions for all the 90-94 legacies. Not ecu or tcu information.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

Legacy777
Site Admin
Site Admin
Posts: 27552
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 » Tue May 18, 2004 7:30 pm

can you email the file.....I can't save the png.....only can save it as a bmp
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 » Tue May 18, 2004 7:36 pm

Huh! You are absolutely right. I don't know how I missed that fact...

Sure, I'll email you the PNG.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212

Legacy777
Site Admin
Site Admin
Posts: 27552
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 » Tue May 18, 2004 9:16 pm

so there doesn't appear to be a "one" cartridge that will do it all apparently....that sort of sucks.

thanks for the png :)
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 » Tue May 18, 2004 9:24 pm

No problem.

Yeah, it would seem that there is no ubercartridge.

For what it's worth, I believe the 1991 cartridge works on all 1990 models, so that narrows it down to three cartridges for ECU/TCU stuff, plus one for air suspension and one for the rare 90-91 climate control.

And there's also my scantool...
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212

Legacy777
Site Admin
Site Admin
Posts: 27552
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 » Tue May 18, 2004 11:04 pm

I didn't even seen one on that sheet that was listed for the climate control....did I miss it?

nevermind......I just looked on the sheet.....I've actually got that one too ;)
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

94L_wagon
First Gear
Posts: 53
Joined: Sun Mar 14, 2004 11:44 pm
Location: San Fran, CA

Post by 94L_wagon » Sat May 22, 2004 8:07 pm

Does anyone know the number for the cam seal on the back of the cams (non-turbo).

Been on hold forever at subaruparts.com :(. Otherwise I will buy it from the local dealer and post up the part number!
94L Wagon (AWD) - bone stock, 136k miles at July 08. Manual (sold - along with my soul to BMW).

vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 » Sat May 22, 2004 9:48 pm

Do you mean the o-ring between the camshaft and the little cover at the back of the head?

That's 806946030, a 46.5mm o-ring with a 2mm cross section.

This thread has a link to the engine parts catalog: http://bbs.legacycentral.org/viewtopic.php?t=14485

You can easily find online dealers who have much better customer support than subaruparts.com.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212

94L_wagon
First Gear
Posts: 53
Joined: Sun Mar 14, 2004 11:44 pm
Location: San Fran, CA

Post by 94L_wagon » Sat May 22, 2004 10:21 pm

vrg3

Thats exactly the one - thanks so much!

I've downloaded the PDFs now - I only had the non-engine ones before.

Thanks again!
Dave
94L Wagon (AWD) - bone stock, 136k miles at July 08. Manual (sold - along with my soul to BMW).

123c
Second Gear
Posts: 396
Joined: Sat Jan 04, 2003 1:44 am
Location: WASHINGTON STATE
Contact:

Post by 123c » Thu Jun 03, 2004 2:18 am

Can anyone tell me the part number or name for that little toothed ring on the hub, that the ABS sensor pick up on, I broke a piece of mine off today when I was replacing pulling my axle out.
[color=red][b]1993 Subaru BC Turbo Legacy (193k miles)
1971 VW Super Beetle
1989 Honda Elite 50
[/color][/b]

Legacy777
Site Admin
Site Admin
Posts: 27552
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 » Thu Jun 03, 2004 2:11 pm

It's called the abs ring. I could look it up when I get home. What year, model, etc car do you have?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

Post Reply