FS OR: Lots of parts.. Legacy, WRX, STI, RS and more.

Got something for sale? Need to sell a part? Got some stuff on auction that you want to let us know about?

(Legacy Central BBS is not responsible for any arbitration between its users relative to this forum.
Play nice and deal straight)

Moderators: Helpinators2, Moderators

Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814

Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

FS OR: Lots of parts.. Legacy, WRX, STI, RS and more.

Post by Legacy294 »

Here's what's available, and will ship if you need:

-'02 WRX EJ20 turbo short block $500 **SOLD**
-Link 44s plug and play standalone ecu for '02-05 WRX $500
-'02 WRX wagon seats rear, great shape $100
-'02 WRX front brake calipers $120
-'02 WRX Passenger airbag and seatbelts (4) $150
-'05 STi Left aluminum control arm $100
-'05 STi aluminum rear lateral links, 3 of 4. 2 fronts, 1 rear $130
-'02-05 STi replica rear spoiler, silver $150obo
-'02-05 WRX top feed injectors $100
-'02-05 WRX Top mount intercooler $50
-Ver 1-3 JDM Slanty IC boot underhood ducting $50
-'02-03 WRX gauge cluster $100
-'04-05 WRX TMIC "boot", underhood ducting, $50
- GT Spec Header/uppipe combo, fits WRX, STi or Legacy Turbo $175
-'99-01 2.5RS white face gauge cluster $75
-'96 Impreza Outback sport gauge cluster $50
-'00 2.5 RS 5 speed transmission, close ratio 4:11, $650
-'00 2.5 RS SOHC 2.5 L heads, a couple of bent valves, $250obo
-'00 2.5 RS fuel pump $25
-2.2 or 2.5 non turbo exhaust, cat back with performance muffler $175 **SOLD**
-JDM 2.5(EJ25) intake manifolds, w/harness, sensors, injectors $125 ea**1 left**
-'96 Impreza Outback sport wagon wiring harness $150
-'96 Impreza Outback sport wagon plastic trim, A/B/C pillar $120
-'96 Impreza Outback sport wagon carpet, grey $75. will also work in 2/4 doors.
-'93-01 Impreza wagon tail lights, no cracks $100 for the pair
-'93 Subaru Legacy Turbo white sedan doors (4) $125 ea, complete w/ door cards
-'93 Subaru Legacy Turbo rear deck lid with spoiler $175
-'93 Subaru Legacy Turbo rear bumper w/ beam, white $150
-'93 Legacy sedan Left tail light $40
-'93 Subaru Legacy Turbo seats $125pr
-'95-98 Subaru Legacy wagon rear hatch reflector $50
-'95-05 front and rear sway bars, L, RS, WRX, OBS models $25-50 ea
-Rear differentials- 3:90, 4:11, 4:44. R160 and R180 $150-500 **R180 SOLD**
-Manual Transmissions- 3:90, 4:11 AWD and FWD $350-750
-Buildable engine cores- 2.2, 2.5 SOHC and DOHC $150-350 including heads
-Suspension parts- control arms, lateral links, subframes..what did you bend in the snow?? :)

Please post, pm or email me for more info or with any questions.

Thanks. :D
Last edited by Legacy294 on Thu May 07, 2009 5:30 pm, edited 2 times in total.
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
Pita84
In Neutral
Posts: 24
Joined: Wed Mar 25, 2009 5:59 am

Post by Pita84 »

have any good struts/springs that will slightly raise a legacy turbo
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

Pita84 wrote:have any good struts/springs that will slightly raise a legacy turbo
How tall do you want to go? Have some Outback springs, and maybe Forester too.. Post or PM whatever you're after.

All PM's replied to. Thanks for all of the inquiries.

Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

Post by 555BCTurbo »

I love you Barrett





Now come get that fucking 2.2!!
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
kimokalihi
Fifth Gear
Posts: 8360
Joined: Mon Nov 06, 2006 3:41 am
Location: Tenino, WA

Post by kimokalihi »

You got a 2.2t you dont' want for cheap?
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

Post by 555BCTurbo »

Shortblock...


But yeah...fairly cheap
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

C'mon Nick,

Don't ho' off my block.. :shock:

I'll try and get it in the next couple of weeks when I'm over there.

B-
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
kimokalihi
Fifth Gear
Posts: 8360
Joined: Mon Nov 06, 2006 3:41 am
Location: Tenino, WA

Post by kimokalihi »

I see. I need a complete motor. One I can just drop in my car and not have to round up parts to make it run. I just want my car to run.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
SubaruNation
Fifth Gear
Posts: 3526
Joined: Wed Jul 18, 2007 5:07 pm
Location: Whammy!

Post by SubaruNation »

stock legacy turbo charge pipe? theelbow thing that runs from the throttle body to the turbo.

i need one
Zach - Legacy Frankenstin
93forestpearl wrote:Keep up the good work. You'll never know what you are capable of unless you push yourself.
smh0101
Fifth Gear
Posts: 3056
Joined: Wed Jan 18, 2006 7:56 am
Location: Orlando, FL

Post by smh0101 »

What would you want for a 4.44 fd Rear Diff?
~Spencer
94 Legacy Turbo (550 Robtune/ej20h v2 Sti RA drivetrain)
94 Legacy Ti Wagon (5mt ej22e)
91 rhd Legacy GT Wagon (factory 5mt, ej20g)
93 rhd Legacy GT type S2 Sedan (4eat, ej20g)
91 rhd Legacy Ti Type S 1.8
03 Lincoln LS V8 Sport
08 300 SRT8
92 Rally
First Gear
Posts: 175
Joined: Wed Mar 25, 2009 7:24 pm
Location: Trevor, Wisconsin
Contact:

Post by 92 Rally »

Legacy294 wrote:
Pita84 wrote:have any good struts/springs that will slightly raise a legacy turbo
How tall do you want to go? Have some Outback springs, and maybe Forester too.. Post or PM whatever you're after.

All PM's replied to. Thanks for all of the inquiries.

Barrett-
www.allwheelsdriven.net
How much of a lift do either one give you? We are looking to get around 1-2" lift over stock. Just looking for a little extra ground clearance and to clear my rally tires (I have 205-55-16's that are more on the large side)... We mainly need struts. I have WRX wagon springs, just need some struts.
jton
First Gear
Posts: 51
Joined: Thu Feb 26, 2009 7:55 pm
Location: Nebraska

Post by jton »

Does the 02-05 WRX TMIC come with y-pipe, elbow, and bpv? Im very interested! And new on here :P I'd like to see pics as well. Thanks.
-Jimmy
[url=http://www.rs25.com/forums/showthread.php?t=104357]1993 Impreza L[/url] w/ Stroked EJ22T
EJ20G DOHC Heads
VF39
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

SubaruNation wrote:stock legacy turbo charge pipe? theelbow thing that runs from the throttle body to the turbo.

i need one
Think I've got one around..I'll check and post up later.

Thanks for the inquiry.

Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

smh0101 wrote:What would you want for a 4.44 fd Rear Diff?
Are you looking for an R160 or R180 and what style axles will you be running?
The early Legacy style (male outer/female inner) or later Impreza/Legacy (male on both ends) style?

Please get back to me when you can.

Thanks for the inquiry.

Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

92 Rally wrote:
Legacy294 wrote:
Pita84 wrote:have any good struts/springs that will slightly raise a legacy turbo
How tall do you want to go? Have some Outback springs, and maybe Forester too.. Post or PM whatever you're after.

All PM's replied to. Thanks for all of the inquiries.

Barrett-
www.allwheelsdriven.net
How much of a lift do either one give you? We are looking to get around 1-2" lift over stock. Just looking for a little extra ground clearance and to clear my rally tires (I have 205-55-16's that are more on the large side)... We mainly need struts. I have WRX wagon springs, just need some struts.
Usually at least 1-1.5" of lift. I have a set of low mileage (less than 2k on them) KYB GR2's for a WRX sedan in good condition. $160 + shipping.

Also, you might think about Outback or Forester struts/springs. That would give you better clearance than with the WRX springs. I used to run Outback struts w/ Scorpion lift springs on my 1st Leggy rally car. That lifted the car about 2" over stock..:)

On your rally tire set up, something in the 195/65r15 range would work better on gravel and/or rally x than a 16. More side wall, skinner contact patch, more grip, and better impact resistance. Also, most gravel tires that you'll find for your car will be in the 15" range.

Thanks for the inquiry.

Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

jton wrote:Does the 02-05 WRX TMIC come with y-pipe, elbow, and bpv? Im very interested! And new on here :P I'd like to see pics as well. Thanks.
The TMIC comes with the y pipe and elbow (one piece) and no bpv. Usually I get $20 for the stock bpv, bit not sure if I have one around. Shoot me over your email, and I can send pics.

Thanks for the inquiry.

Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
92 Rally
First Gear
Posts: 175
Joined: Wed Mar 25, 2009 7:24 pm
Location: Trevor, Wisconsin
Contact:

Post by 92 Rally »

Legacy294 wrote:
92 Rally wrote:
Legacy294 wrote: How tall do you want to go? Have some Outback springs, and maybe Forester too.. Post or PM whatever you're after.

All PM's replied to. Thanks for all of the inquiries.

Barrett-
www.allwheelsdriven.net
How much of a lift do either one give you? We are looking to get around 1-2" lift over stock. Just looking for a little extra ground clearance and to clear my rally tires (I have 205-55-16's that are more on the large side)... We mainly need struts. I have WRX wagon springs, just need some struts.
Usually at least 1-1.5" of lift. I have a set of low mileage (less than 2k on them) KYB GR2's for a WRX sedan in good condition. $160 + shipping.

Also, you might think about Outback or Forester struts/springs. That would give you better clearance than with the WRX springs. I used to run Outback struts w/ Scorpion lift springs on my 1st Leggy rally car. That lifted the car about 2" over stock..:)

On your rally tire set up, something in the 195/65r15 range would work better on gravel and/or rally x than a 16. More side wall, skinner contact patch, more grip, and better impact resistance. Also, most gravel tires that you'll find for your car will be in the 15" range.

Thanks for the inquiry.

Barrett-
www.allwheelsdriven.net

I already have the 16's thats why we want to use them. Dont feel like spending more money on wheels/tires when we already have a good set. I was using these on my WRX wagon for 2yrs with great success.

We want OBS or Forester struts/springs, they are just hard to find.

Any idea what WRX struts and springs will do to it? I can not really see it dropping any with that combination.... Not sure though.
smh0101
Fifth Gear
Posts: 3056
Joined: Wed Jan 18, 2006 7:56 am
Location: Orlando, FL

Post by smh0101 »

Legacy294 wrote:
smh0101 wrote:What would you want for a 4.44 fd Rear Diff?
Are you looking for an R160 or R180 and what style axles will you be running?
The early Legacy style (male outer/female inner) or later Impreza/Legacy (male on both ends) style?

Please get back to me when you can.

Thanks for the inquiry.

Barrett-
www.allwheelsdriven.net
Im looking for an r160 rear diff that will work with the Stock Legacy Turbo axles.... so the male outer/female inner.
~Spencer
94 Legacy Turbo (550 Robtune/ej20h v2 Sti RA drivetrain)
94 Legacy Ti Wagon (5mt ej22e)
91 rhd Legacy GT Wagon (factory 5mt, ej20g)
93 rhd Legacy GT type S2 Sedan (4eat, ej20g)
91 rhd Legacy Ti Type S 1.8
03 Lincoln LS V8 Sport
08 300 SRT8
jton
First Gear
Posts: 51
Joined: Thu Feb 26, 2009 7:55 pm
Location: Nebraska

Post by jton »

Sent a PM with my email Barrett. Also, could you quote me on shipping to 68510 as well? Thanks.
-Jimmy
[url=http://www.rs25.com/forums/showthread.php?t=104357]1993 Impreza L[/url] w/ Stroked EJ22T
EJ20G DOHC Heads
VF39
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

SubaruNation wrote:stock legacy turbo charge pipe? theelbow thing that runs from the throttle body to the turbo.

i need one
Hunted around and found the charge pipe for you.. :D

List on them is over $200.. :shock:

How about $40 shipped? 20% of new cost.

LMK and I can get it otw.

Thanks.

Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
jton
First Gear
Posts: 51
Joined: Thu Feb 26, 2009 7:55 pm
Location: Nebraska

Post by jton »

Hey Barrett, did you get my PM with my email? Still waiting on those pics!
-Jimmy
[url=http://www.rs25.com/forums/showthread.php?t=104357]1993 Impreza L[/url] w/ Stroked EJ22T
EJ20G DOHC Heads
VF39
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

jton wrote:Hey Barrett, did you get my PM with my email? Still waiting on those pics!
Yes,
Can't seem to upload pics with my new phone.. :(

If you have a cell that get pic messages I can send them asap.

Pm if you do.. my other digicam isn't working.

Thanks,
Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
jton
First Gear
Posts: 51
Joined: Thu Feb 26, 2009 7:55 pm
Location: Nebraska

Post by jton »

I no longer need the TMIC.

Thanks for the quick responses and good communication.

GL with your sales,

Jimmy
-Jimmy
[url=http://www.rs25.com/forums/showthread.php?t=104357]1993 Impreza L[/url] w/ Stroked EJ22T
EJ20G DOHC Heads
VF39
xbn377
First Gear
Posts: 110
Joined: Sat Mar 28, 2009 1:37 am
Location: Manistee, MI

Post by xbn377 »

Might be interested in the tmic. I cant remember if this will fit fairly easy on a 91 legacy ss. I will check around on here and am very interested.
Shawn

91 Legacy SS AT
93 Legacy L Wagon

To get your hands on superior lubricant products from AMSOIL utilize the following url:

http://www.amsoil.com/redirect.cgi?zo=1819626&page=store
xbn377
First Gear
Posts: 110
Joined: Sat Mar 28, 2009 1:37 am
Location: Manistee, MI

Post by xbn377 »

Forgot to add what would be the total shipped to 49660. And as i read above that it includes the y-pipe. Let me know and i will reply.
Shawn

91 Legacy SS AT
93 Legacy L Wagon

To get your hands on superior lubricant products from AMSOIL utilize the following url:

http://www.amsoil.com/redirect.cgi?zo=1819626&page=store
Post Reply