man. canadian seatbelts /92 SS partout/ Stromug (Boise)
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
man. canadian seatbelts /92 SS partout/ Stromug (Boise)
I have a canadian 92 turbo leggy with the 5mt. I will be parting it out once the swap is done. I am keeping the engine/xmembers/trans/rear diff and axles.
it is a Canadian car so gauges read in KM
Body is rough but glass is clean from what I remember (ask for specific info and I'll check).
All items are in Boise, Idaho and are up for best offer. I need a 5 speed short shifter w/linkage, STI topmount IC, and aftermarket turbo inlet pipe/hose. I'm willing to trade parts to make a deal. Gotta love the barter system!
2.25" Stromung Catback. brand new never mounted near perfect condition(just a couple small scrapes from it being in my shed for over a year) NOT SURE ABOUT FITMENT, this may be for the newer style Legacy? It would be easy for the muffler shop to make it fit, but I just wanted to be honest.
1992 Legacy SS Turbo front bumper. brand new never mounted near perfect
Front mount intercooler and all piping/connectors (fit for legacy)
I also have some newish drilled rotors/ceramic pads all around, extra fenders and saab side mount IC
I will part out specific items like the headliner or chime. please pm me an offer and be patient as I am still in the middle of the swap and my work schedule and distance from the shop keeps me from getting picts and parts quickly.
just hit me up and I'll do the best i can, first come first served.
thanks
located in Boise, ID
it is a Canadian car so gauges read in KM
Body is rough but glass is clean from what I remember (ask for specific info and I'll check).
All items are in Boise, Idaho and are up for best offer. I need a 5 speed short shifter w/linkage, STI topmount IC, and aftermarket turbo inlet pipe/hose. I'm willing to trade parts to make a deal. Gotta love the barter system!
2.25" Stromung Catback. brand new never mounted near perfect condition(just a couple small scrapes from it being in my shed for over a year) NOT SURE ABOUT FITMENT, this may be for the newer style Legacy? It would be easy for the muffler shop to make it fit, but I just wanted to be honest.
1992 Legacy SS Turbo front bumper. brand new never mounted near perfect
Front mount intercooler and all piping/connectors (fit for legacy)
I also have some newish drilled rotors/ceramic pads all around, extra fenders and saab side mount IC
I will part out specific items like the headliner or chime. please pm me an offer and be patient as I am still in the middle of the swap and my work schedule and distance from the shop keeps me from getting picts and parts quickly.
just hit me up and I'll do the best i can, first come first served.
thanks
located in Boise, ID
Last edited by Magnetrax on Thu Dec 10, 2009 6:18 am, edited 4 times in total.
yea buddy.
What are you keeping, and what are you willing to part out?
Do you plan to keep the key chime timer?
Do you plan to keep the key chime timer?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Third Gear
- Posts: 617
- Joined: Thu Dec 13, 2007 5:41 am
- Location: Spokane,Wa
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
I'm interested in the trim pieces and roof associated with the manual belts, but not the belts themselves.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Fourth Gear
- Posts: 1517
- Joined: Mon Oct 10, 2005 8:25 pm
- Location: Portland, Oregon/ Boise, Idaho
- Contact:
-
- Fifth Gear
- Posts: 2774
- Joined: Sun Nov 23, 2003 12:22 am
- Location: Western WA!
-
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
I've got a Group A shortshifter I'm going to be selling soon. As soon as I find time to remove it from my car. It's never been used but I did install it thinking I was going to use it but I didn't like the fact that the shifter is now back further towards the Ebrake.
So it's basically new and I bought it from Group A here:
http://www.groupa.ca/PR_short_shifters.html
$100 shipped. Comes with original box.
You'll need a WRX shift linkage to fit this shifter as it is wider than the early legacy shifters/linkage.
It's a pretty nice shifter though and unlike most shortshifters it has 2 adjustments. Height and throw.
So it's basically new and I bought it from Group A here:
http://www.groupa.ca/PR_short_shifters.html
$100 shipped. Comes with original box.
You'll need a WRX shift linkage to fit this shifter as it is wider than the early legacy shifters/linkage.
It's a pretty nice shifter though and unlike most shortshifters it has 2 adjustments. Height and throw.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
If you get the belts, are you interested in the key chime? If not, I'd be interested in it.livestrong14 wrote:How much for the canadian belts picked up?
Thanks
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Well if Livestrong buys the seatbelts and I buy the rest of the m/t trim including roof piece, will that work for you? I'll be in Boise (Mountain home, actually) next week, so I could pick it up then. Well only interest in roof piece if you have a sunroof.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
I do have a sunroof, and what i think are brand new seals for the roof, they are not installed.
I won't be able to get out there till saturday night, I'll sell the chime and roof panel (headliner?) seperate if livestrong doesn't want it.
but could you post a picture of what it looks like, or tell me where it is so I know what to pull. I'm brand new to old school leggys.
I won't be able to get out there till saturday night, I'll sell the chime and roof panel (headliner?) seperate if livestrong doesn't want it.
but could you post a picture of what it looks like, or tell me where it is so I know what to pull. I'm brand new to old school leggys.
yea buddy.
-
- Fourth Gear
- Posts: 1517
- Joined: Mon Oct 10, 2005 8:25 pm
- Location: Portland, Oregon/ Boise, Idaho
- Contact:
ok it is still for sale/trade. I will part out specific items like the headliner or chime. please pm me an offer and be patient as I am still in the middle of the swap and my work schedule and distance from the shop keeps me from getting picts and parts quickly.
just hit me up and I'll do the best i can, first come first served.
thanks
just hit me up and I'll do the best i can, first come first served.
thanks
yea buddy.
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
So I need the headliner and these: (Legacy777's pic)Magnetrax wrote:ok it is still for sale/trade. I will part out specific items like the headliner or chime. please pm me an offer and be patient as I am still in the middle of the swap and my work schedule and distance from the shop keeps me from getting picts and parts quickly.
just hit me up and I'll do the best i can, first come first served.
thanks
I don't need the shifter trim piece or the leftmost piece on the bottom or the door floorboards. I'll be down next week (not sure of exact date).
Thanks,
Mike
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
I need the chime and the electrical connector that plugs into it with a few inches of wire left before it's cut.
It's located just to the left of the glove box.
It's labeled "Seat Belt Timer" in Fig. 66-5
http://www.surrealmirage.com/subaru/fil ... tion05.jpg
Will send you PM.
Thanks
It's located just to the left of the glove box.
It's labeled "Seat Belt Timer" in Fig. 66-5
http://www.surrealmirage.com/subaru/fil ... tion05.jpg
Will send you PM.
Thanks
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
Please PM me a price on the complete seat belt conversion (plastics & belts) shipped to 17701. Thanks.
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Pm'd you
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Fifth Gear
- Posts: 3526
- Joined: Wed Jul 18, 2007 5:07 pm
- Location: Whammy!
I would like the black console piece i circled in yellow below, And the manual seatbelts that go across your chest if you have them.
thanks!
EDIT: also how much for the exhaust?
it can be modded to accept 3" right?
thanks!
EDIT: also how much for the exhaust?
it can be modded to accept 3" right?
Zach - Legacy Frankenstin
93forestpearl wrote:Keep up the good work. You'll never know what you are capable of unless you push yourself.
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
PM'd you again
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Fifth Gear
- Posts: 3526
- Joined: Wed Jul 18, 2007 5:07 pm
- Location: Whammy!