ISO MY91 turbo rear lsd axle stubs

Got something for sale? Need to sell a part? Got some stuff on auction that you want to let us know about?

(Legacy Central BBS is not responsible for any arbitration between its users relative to this forum.
Play nice and deal straight)

Moderators: Helpinators2, Moderators

Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814

Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Post Reply
LilLegacy
In Neutral
Posts: 11
Joined: Tue Jun 07, 2016 10:44 am
Location: Des Moines, WA

ISO MY91 turbo rear lsd axle stubs

Post by LilLegacy »

I know this might be a long shot but I found an lsd out of a 91 legacy ss but do not have the specific axle stubs that are needed for this differential to work. Let me know if you have what I need! Thanks.
1993 Legacy SS 5mt, just getting started
cj91legss
Fifth Gear
Posts: 6322
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: ISO MY91 turbo rear lsd axle stubs

Post by cj91legss »

Could you provide a picture of your diff for reference?
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
Scruff_
First Gear
Posts: 113
Joined: Fri May 09, 2014 7:11 pm
Location: Everett, WA

Re: ISO MY91 turbo rear lsd axle stubs

Post by Scruff_ »

Aren't the stubs on the axles on the '91s?
1991 Subaru Legacy SS 5MT
1991 Subaru Legacy SS 4EAT
1994 Subaru Legacy TW
2000 Toyota Echo
cj91legss
Fifth Gear
Posts: 6322
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: ISO MY91 turbo rear lsd axle stubs

Post by cj91legss »

Not turbo legacy.

Sent from my SM-N920T using Tapatalk
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
Scruff_
First Gear
Posts: 113
Joined: Fri May 09, 2014 7:11 pm
Location: Everett, WA

Re: ISO MY91 turbo rear lsd axle stubs

Post by Scruff_ »

cj91legss wrote:Not turbo legacy.

Sent from my SM-N920T using Tapatalk
Oh blah, duh... was about to delete my comment after I looked it up >.<
1991 Subaru Legacy SS 5MT
1991 Subaru Legacy SS 4EAT
1994 Subaru Legacy TW
2000 Toyota Echo
RoughDiamond
First Gear
Posts: 121
Joined: Fri Dec 19, 2014 8:39 am
Location: Akron, OH

Re: ISO MY91 turbo rear lsd axle stubs

Post by RoughDiamond »

Might be hard to find without a complete diff. Without those stubs, the diff is next to useless...

On that note, I've got a good, but high mileage diff (with stubs) if you're interested...
1991 Legacy SS (BC) EJ22T // 4EAT // Pewter Metallic (Sold)
1991 Legacy SS (BC) EJ22T // 5MT // Rio Red (Sold)

1991 Legacy SSRS (BC) EJ20G (Full COP and AWIC Swap) // 5MT // White Pearl Tri-Coat Africa Rally replica in progress.
LilLegacy
In Neutral
Posts: 11
Joined: Tue Jun 07, 2016 10:44 am
Location: Des Moines, WA

Re: ISO MY91 turbo rear lsd axle stubs

Post by LilLegacy »

Images of what I'm looking for.

Image

Image
1993 Legacy SS 5mt, just getting started
cj91legss
Fifth Gear
Posts: 6322
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: ISO MY91 turbo rear lsd axle stubs

Post by cj91legss »

They're not loading.

Sent from my SM-N920T using Tapatalk
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
LilLegacy
In Neutral
Posts: 11
Joined: Tue Jun 07, 2016 10:44 am
Location: Des Moines, WA

Re: ISO MY91 turbo rear lsd axle stubs

Post by LilLegacy »

Sorry I've never uploaded images before. I'll try again

Image

Image
1993 Legacy SS 5mt, just getting started
cj91legss
Fifth Gear
Posts: 6322
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: ISO MY91 turbo rear lsd axle stubs

Post by cj91legss »

It's all good, just trying to help. You have to use an image sharing site like photo bucket. You upload the images to that site and then copy and paste the links to your post.

Sent from my SM-N920T using Tapatalk
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
LilLegacy
In Neutral
Posts: 11
Joined: Tue Jun 07, 2016 10:44 am
Location: Des Moines, WA

Re: ISO MY91 turbo rear lsd axle stubs

Post by LilLegacy »

Thanks I appreciate it. Here are the actual links to the images.

https://postimg.org/image/3nqv2iwqf/

https://postimg.org/image/txbxlbinr/
1993 Legacy SS 5mt, just getting started
LilLegacy
In Neutral
Posts: 11
Joined: Tue Jun 07, 2016 10:44 am
Location: Des Moines, WA

Re: ISO MY91 turbo rear lsd axle stubs

Post by LilLegacy »

I'm just missing the axle stub. I already have a used 3.90 lsd differential And if I can't find the stub then I guess I'm out of luck lol
1993 Legacy SS 5mt, just getting started
wtdash
Fifth Gear
Posts: 2345
Joined: Fri May 04, 2007 4:09 pm
Location: N. ID

Re: ISO MY91 turbo rear lsd axle stubs

Post by wtdash »

sorry I can't help, as I'm in the same boat...LSD and stubs. It's 'very' hard to believe that Subaru didn't use these in something else....even if they were a '91 SS only part.

I've read about STI axle stubs like these, but obviously they're different.

Image
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
Alphius
Fourth Gear
Posts: 1204
Joined: Mon Aug 31, 2009 9:09 pm
Location: Rochester, WA

Re: ISO MY91 turbo rear lsd axle stubs

Post by Alphius »

Early JDM WRX used those stubs as well. The only USDM car that used them was the 91 SS as far as I know for sure. The late '80s Subaru RX may have them as well for it's clutch-type LSD. They are very, very rare to find without a diff, so good luck in your search.
wtdash
Fifth Gear
Posts: 2345
Joined: Fri May 04, 2007 4:09 pm
Location: N. ID

Re: ISO MY91 turbo rear lsd axle stubs

Post by wtdash »

Found this opposedforces.com.

#4 is the Shaft-axle drive 38415AA010. Shows this is from a '93 Impreza and under the WRX sub-category, but it's European - not JDM.

JP-carparts.com shows the same part but shows it for newer models - '94-'97, so doubt it's the right one.

Opposedforces doesn't show any SS parts or before '93.

If that part exists on its own, 'might' be avl. from jp-carparts.com or similar?

Partsouq.com doesn't have it.

Not sure where else to look for early JDM parts.
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
Alphius
Fourth Gear
Posts: 1204
Joined: Mon Aug 31, 2009 9:09 pm
Location: Rochester, WA

Re: ISO MY91 turbo rear lsd axle stubs

Post by Alphius »

Yeah, that's not the right part wtdash. You can tell because it's the same for left and right. The early VLSD uses two different stubs.

Good news is, I used my super-secret-squirrel powers to find the proper part numbers. Bad news; mucho discontinued. At least now you know what part numbers you would need.

#10 - 27017AA001 - Spindle Assy RH - List Price $133.85
#11 - 27017AA010 - Spindle Assy LH - Discontinued
#9 - 2x 622034020 - Packing - Discontinued
#12 - 27019AA000 - Circlip (Viscous) RH - Discontinued
#13 - 27019AA010 - Circlip (Viscous) LH - List Price $0.80
#14 - 28018AA000 - Packing (Viscous) RH - Discontinued

Image
wtdash
Fifth Gear
Posts: 2345
Joined: Fri May 04, 2007 4:09 pm
Location: N. ID

Re: ISO MY91 turbo rear lsd axle stubs

Post by wtdash »

Ha...just found those too on Josh/Legacy777's parts catalog. :-)

Edit: I just read that the SVX might have used the same stubs? Different FD ratio, but there's probably a few more SVX's than '91 SS.....sitting in a Yard w/a blown trans?
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
Alphius
Fourth Gear
Posts: 1204
Joined: Mon Aug 31, 2009 9:09 pm
Location: Rochester, WA

Re: ISO MY91 turbo rear lsd axle stubs

Post by Alphius »

94+ SVX did not use the correct stubs, I'm having trouble getting access to 92-93 parts catalogs so I can't speak for those years yet.

I do have the dealer parts lookup software, but it only goes back to 94 on the SVX.
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: ISO MY91 turbo rear lsd axle stubs

Post by mike-tracy »

Corrections/comments: The RX axle stubs won't work, they are equal length while the 1991 VLSD has unequal length stubs.

The SVX has unequal length axles, which may or may not work with your diff. The problem would be you'd need to swap to SVX hubs (impossible, won't bolt up) or possibly STI hubs ($$$$$$$$$$ when you account for the fact that you need rear brembos or 2 piston calipers from the 2006-2007 WRX, rotors and pads) to use these axles. I read that someone tried making a custom axle using the unequal length stub from an SVX, and "normal" axles, it didn't work. If you were to attempt custom axle route, you only need the "longer" svx axle, as a conventional 95-99 legacy axle fits the other side.

SVX axles fitting STI hubs:
http://www.subaru-svx.net/forum/showthread.php?t=62728

I'm having a hard time finding a pic of SVX axles, but they look similiar to this (a pic of 90s JDM unequal axles for a CLSD diff):
Image
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: ISO MY91 turbo rear lsd axle stubs

Post by mike-tracy »

Fateo66 says the SVX diffs are the same as the legacy turbo, but have a different spline count. I don't know if he's just referring to the outer axles or the part that goes into the diff.

http://www.rs25.com/forums/f8/184730-vl ... ure-2.html

So SVX axles may be out as well. Or may not. :-D
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
wtdash
Fifth Gear
Posts: 2345
Joined: Fri May 04, 2007 4:09 pm
Location: N. ID

Re: ISO MY91 turbo rear lsd axle stubs

Post by wtdash »

Thanks for the info Mike and Gabe.
I think I'll just mount the Diff on the wall in the shop.
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: ISO MY91 turbo rear lsd axle stubs

Post by mike-tracy »

I don't get the point of separating those unique stubs from that diff
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
Alphius
Fourth Gear
Posts: 1204
Joined: Mon Aug 31, 2009 9:09 pm
Location: Rochester, WA

Re: ISO MY91 turbo rear lsd axle stubs

Post by Alphius »

Lots of times people don't know they're special and the stubs get left in the axles.
Overall, much easier to get a WRX or Outback Limited VLSD rear carrier and put it in your own 3.90 diff. Easy, cheap, and no stubs required.
Post Reply