Built part-out (CT) - Gauges, intercoolers, interior, drivetrain etc.

Got something for sale? Need to sell a part? Got some stuff on auction that you want to let us know about?

(Legacy Central BBS is not responsible for any arbitration between its users relative to this forum.
Play nice and deal straight)

Moderators: Helpinators2, Moderators

Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814

Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Post Reply
ggbox69
First Gear
Posts: 55
Joined: Wed Aug 04, 2010 2:33 pm
Location: Connecticut

Built part-out (CT) - Gauges, intercoolers, interior, drivetrain etc.

Post by ggbox69 »

I am looking to clear out a lot of the parts from my 94 wagon build a few years back, the car was rotted and I stripped it and I am now selling most of the performance parts and parts I kept for future builds. Some stuff is new, never used. The VF39, Robtune ECU, and injectors are gone, but everything else is for sale. I have parted out other sport sedans and those parts are here too. Have several 5 speed transmissions, axles, diffs, and some body parts. Willing to ship smaller stuff, the rest to be picked up in Seymour, CT. Willing to drive/meet depending on what you want. See list below, PM for details.

Performance:
Walbro 255 with sock, 25k miles $40
V2 STI top mount intercooler, with hose, factory scoop and duct, plus factory (V4 I think) water spray tank SOLD
MSD Coil (new in box) for neon plus neon connector with pigtail ready to wire in $40
Hallman Pro RX boost controller SOLD
Joe P boost controller $20
Mishimoto oil separator setup: SOLD
Autometer z-series boost gauge mounted in dash vent w/some hose and wiring (may be willing to sell just gauge and plate) $60
AEM wideband setup with all wiring, sensor and gauge. Have original box, hardware, and custom steering column pod SOLD
Full exhaust setup: SOLD
Add-on harness for BCS, pressure solenoid, and MAP sensors (I built this when I went NA to T) with sensors $20
5sp shifter (I think from WRX but was in my Legacy), w/kartboy front bushings, I rebuilt whole thing years ago, still tight, w/spring and pins $40
Kartboy WRX rear shifter mount, never used $15
Kartboy WRX outrigger bushings, never used $20
Rear diff bushings (for JDM WRX?), aftermarket (forgot brand), never used $20
WRX STI motor mount pair: SOLD
Group N pitch mount $25
WRX coolant tank w/some brackets I made to put in a Legacy $30
WRX TMIC, black plastic one, w/cheap aftermarket cast inlet fittings, no hoses $40

Stock stuff:
N/A EJ22 ECU (1994) $15
N/A EJ22 injectors (red 1994, 170k miles) $15
1994 ECU plugs clipped from car (3 of them) + chassis harness pieces (good for scavenging wires) and relays/misc $20 grab bag
1992 SS center caps, good shape $10
1994 blue center console trim w/inner and outer boot (rear two clips are broken but worked fine for me $20
PN 047105166 screw X3 (I think these are to attach fuel filler neck to car), new in bags $5
Impreza dash mounted compass (single DIN screen) with bezel and some wiring, no sensors, I never got to use/test it $40
Stock MAF (I think EJ22T) $10
Pioneer head unit/stereo (single DIN) w/wiring for Legacy, and 1.5 DIN storage compartment (OEM subaru) $50
2002 Forrester fuel filter NIB $10
Stock fuel pumps, I think 1 turbo and 1 NA, with misc parts $10

Drivetrain:
Spec clutch setup for NA trans with custom made disc and stock FW, 25k miles $150
5 Speed Trans converted to RWD (from 1995 legacy L), worked great $300
5 Speed Trans from another Sport Sedan: SOLD
5 Speed Trans from Forrester, possible blown center diff $20
Later outback limited slip diff and axles (will check ratio) $100

Extra driver’s fender: SOLD
Extra turbo two-piston front brake setup (centric rotors, akebono pads), make offer

Image
Image
Walbro $40
Image
MSD Coil $40
Image
Joe P MBC $20
Image
Dash with boost gauge $60
Image
NA to T sensor harness $20
Image
Image
Image
Shifter $40
Image
Kartboy shifter mount $15
Image
Kartboy outrigger bushings $20
Image
Diff bushings for JDM wrx $20
Image
Group N pitch mount $25
Image
WRX coolant tank $30
Image
WRX TMIC $40
Image
NA 1994 M/T ECU $15
Image
Wiring grab bag with harness plugs and leads $20
Image
NA Injectors 170k miles $15
Image
Center Caps $10
Image
Image
Shifter Trim $20
Image
Image
Fuel neck screws? $5
Image
Image
Dash compass $40
Image
MAF $10
Image
Image
Stereo and storage bin $50
Image
Fuel Filter $10
Image
Stock Fuel pumps condition unknown $10
Image
Image
Image
Image
Spec clutch setup for NA trans $150
Last edited by ggbox69 on Fri Feb 07, 2020 9:34 pm, edited 4 times in total.
1994 Wagon - Turbo swapped DD
EJ22T, 3'' TBE, Apexi Intake, Spec Clutch, H&R's, Robtune, VF39, 550's, Walbro, V2 STI Top Mount, AEM Wideband
aredub2
First Gear
Posts: 82
Joined: Tue Mar 15, 2016 2:29 am
Location: Spanaway, WA

Re: Built part-out (CT) - Gauges, intercoolers, interior, drivetrain etc.

Post by aredub2 »

:) :) :) :) :) :)
LegacyT
Fourth Gear
Posts: 1220
Joined: Mon Oct 21, 2002 9:53 pm
Location: Ottawa, Ontario, Canada, Now Sioux Lookout

Re: Built part-out (CT) - Gauges, intercoolers, interior, drivetrain etc.

Post by LegacyT »

Do you have a pic of the fender? Is it an OEM one?
1991 Turbo Sedan, Aspen White 5MT, Sold RIP
1994 Turbo Sedan, Crimson Pearl 5MT, from British Columbia-no rust!
ggbox69
First Gear
Posts: 55
Joined: Wed Aug 04, 2010 2:33 pm
Location: Connecticut

Re: Built part-out (CT) - Gauges, intercoolers, interior, drivetrain etc.

Post by ggbox69 »

I'll add a pic of the fender on Saturday when I'm back at my shop. It was the factory fender off my wagon, I kept it to replace a rusty one on another car, I think it was rust free but had a dent near the headlight.
1994 Wagon - Turbo swapped DD
EJ22T, 3'' TBE, Apexi Intake, Spec Clutch, H&R's, Robtune, VF39, 550's, Walbro, V2 STI Top Mount, AEM Wideband
LegacyT
Fourth Gear
Posts: 1220
Joined: Mon Oct 21, 2002 9:53 pm
Location: Ottawa, Ontario, Canada, Now Sioux Lookout

Re: Built part-out (CT) - Gauges, intercoolers, interior, drivetrain etc.

Post by LegacyT »

Any word on that fender?
1991 Turbo Sedan, Aspen White 5MT, Sold RIP
1994 Turbo Sedan, Crimson Pearl 5MT, from British Columbia-no rust!
ggbox69
First Gear
Posts: 55
Joined: Wed Aug 04, 2010 2:33 pm
Location: Connecticut

Re: Built part-out (CT) - Gauges, intercoolers, interior, drivetrain etc.

Post by ggbox69 »

Sorry I sold the fender as part of a package deal with some other stuff.
1994 Wagon - Turbo swapped DD
EJ22T, 3'' TBE, Apexi Intake, Spec Clutch, H&R's, Robtune, VF39, 550's, Walbro, V2 STI Top Mount, AEM Wideband
Larry Witherspoon
First Gear
Posts: 91
Joined: Fri Oct 18, 2002 4:08 am
Location: Torrance (Los Angeles), California

Re: Built part-out (CT) - Gauges, intercoolers, interior, drivetrain etc.

Post by Larry Witherspoon »

Hello Mr. Box

If you still have the Walbro 255 fuel pump I would like to make you a $40 full cash offer

Most importantly though, I'm trying to find a good 91-94 Subaru Legacy Turbo front suspension subframe crossmember part number 20100 AA111

This part number was only listed in the factory parts manual for the 91-94 turbo cars - all non turbo cars have other part numbers, and I'm chicken to try other than the turbo part number, due to unknown issues

Can you help me please ?

Larry Witherspoon in Los Angeles
ssspoon@aol.com
310-429-4269
Larry Witherspoon
ssspoon@aol.com
Torrance (Los Angeles)
92 Turbo Legacy Wagon
310-429-4269
Post Reply