Fog Light install 90-91

Collection of technical archives from the BC-BF LegacyWorks Yahoo! group.

Moderators: Helpinators, Moderators

Locked
John D

Fog Light install 90-91

Post by John D »

I finally did it. I was able to install an extra bulb in each side
marker light to turn them into turn signals.

This is what I did.

-pulled up the turn signal wire connectors up near the top by the side
marker.
-drill and install new bulb socket.
-cut off the old turn signal connector and attach them to the new
sockets
-plug the original side marker connector to the new bulb
-plug in the turn signal connector to the old side marker light
connection.

So what side effects so far?
-The turn signal flashes about twice as fast because of the wattage of
the bulb. This does not affect hazards though.
-the little black plastic shavings are hard to get out. I ended up
washing it out with water and drying it with a hair dryer.

Other notes
-Both connectors for the turn signal and the side markers are the same
type of connector
-Parts America - Calterm 08591 side marker socket assembly $3.50
-Parts America - Sylvania 168 bulbs $2.00

Here are some pics of the car with and without the fogs (they won't be
up forever so check them out)

Without fog lights
http://www.sunnygulf.com/friends/nofog.JPG
http://www.sunnygulf.com/friends/fog5.JPG


With fog lights
http://www.sunnygulf.com/friends/fog2b.JPG
http://www.sunnygulf.com/friends/fog2.JPG
http://www.sunnygulf.com/friends/fog3.JPG
http://www.sunnygulf.com/friends/fog4.JPG
http://www.sunnygulf.com/friends/fog5.JPG
http://www.sunnygulf.com/friends/fog6.JPG


John Dolinga
www.SunnyGulf.com
Josh Colombo

Fog Light install 90-91

Post by Josh Colombo »

John,

Sounds very cool!

Couple questions/clarifications. Did you keep the stock bulbs in the stock location for the normal side markers? and then install new sockets & bulbs for the blinker?

The faster blinking....have you looked at getting a different turn signal relay. I'd have issues with the faster blinking.....that drives me nuts.....but that's me :)

Josh
John D

Fog Light install 90-91

Post by John D »

Did you keep the stock bulbs in the stock location for the normal side markers?
-Yes the stock bulb is in the stock location BUT that bulb is now the turn signal (I decided to do that because it’s brighter)

Then install new sockets & bulbs for the blinker
-The new socket and bulb I decided to use for the side markers (dimmer so you can still see the blinker flash)

I would also have to say the fast blinking does drive me nuts also. But for the 3min a day that I use my turn signal I guess it’s worth it to have the fogs. Where is the blinker relay located? Is it easy and inexpensive to swap out?

One other issue I forgot to mention is that when drilling you will want to keep trying to fit in the socket (the tighter the better) also the sockets I chose are not hard plastic instead its rubber so its has a nice snug fit.

Hope that helps!

Thanks!
John Dolinga
www.SunnyGulf.com
John D

Fog Light install 90-91

Post by John D »

Another take on this... wonder if this would work on the bc bf

http://www.scoobymods.com/forums/showth ... 0&highligh
t=side+marker



John Dolinga
www.SunnyGulf.com
Locked