NEW MEMBER

Collection of technical archives from the BC-BF LegacyWorks Yahoo! group.

Moderators: Helpinators, Moderators

milehial2000

New member

Post by milehial2000 » Fri May 03, 2002 11:19 pm

Sure would you like a picture of mine
AL(CO)

Josh Colombo

New member

Post by Josh Colombo » Sat May 04, 2002 11:31 am

Do a search in the past messages. I believe it was Larry Witherspoon that has tried swapping the DOHC's on the EJ22T. I think there were some things that either didn't line up perfectly, or something.....do a search and you should be able to find some good info.

Josh

Z1Auto@aol.com

New member

Post by Z1Auto@aol.com » Sun Jun 16, 2002 2:13 pm

Hey guys - just joined the lsit the otehr day, as I am the soon to be new
owner of a sweet 91 Legacy turbo. Car is pearl white, lots of mileage
(159k), but all is original (except the clutch)...down to the exhaust and
turbo!

Many of you guys might remember my GC8 Impreza that ws first turbo'd, then
had a STi V4 swap in it. I sold it about a year ago and since I make my
daily grind tuning Subarus and selling the coolest parts for them, I wanted
to get back into it...this was my selection to tide me over till my other
love (Mitsubishi's) get the Evo here (I'm on the list), or until the Legacy
2.5 Turbo gets here (which I hear is damn near close to happeneing)

Not being able to leave well enough alone, I am looking at doing suspension
mods first. Already ahvea set of KYB's coming, now need to get springs. I
ahev heard that i can use ones for a GC6/8 without a problem, just want to
confirm. Or, am I better off with Legacy specific units? I know H&R offers
a set, btu I am not partial to theri springs at all.

Next question is downpipes: can I use one for a WRX? if so, I already ahve 2
coming to choose from (BPM and Syms)

thanks in advance guys!

You can bet we'll have a complete Legacy section on our site very soon now!
adam
Z-1 Performance
www.z1auto.com

devin kundla

New member

Post by devin kundla » Sun Jun 16, 2002 10:03 pm

a complete legacy section? how about some custom gauges for the earlier models? :-p

can't find them anywhere!

John_

New member

Post by John_ » Mon May 19, 2003 5:33 am

Hi Everyone

I live in Auckland, New Zealand and drive a '92 JDM BF5 (wagon). Has a few
mods here and there, done a P.B at the local strip of 13.99. not bad for
1450kg incl driver and a full tank of gas :)

John

Hardy Jones

New member

Post by Hardy Jones » Mon May 19, 2003 6:43 pm

welcome, hope you enjoy reading a ton of info and dont be afraid to ask a question if you have one

John_

New member

Post by John_ » Mon May 19, 2003 6:53 pm

Cheers.

So far this list has been quiet. :)

In the U.S you didn't get the turbo models did you?

Josh Colombo

New member

Post by Josh Colombo » Mon May 19, 2003 7:13 pm

You may want to check out www.bbs.legacycentral.org

We got tired of the yahoo setup, so Dave the other admin setup the
board. Also there is another rs liberty board too which has more people
in your neck of the woods. http://www.rslibertyclub.org/forums/

Josh

John_

New member

Post by John_ » Mon May 19, 2003 7:23 pm

Cheers

Those Aussie guys are pretty quiet.

John

Josh Colombo

New member

Post by Josh Colombo » Mon May 19, 2003 7:43 pm

The legacy central bbs is pretty active.

FREDERICK.WHITMORE@CN.CA

New member

Post by FREDERICK.WHITMORE@CN.CA » Tue May 20, 2003 8:53 am

The U.S. did get the turbo models but they only came with 160 hp and no
intercooler!

Fred

Locked