I need some help.. (with my robtune)
Moderators: Helpinators, Moderators
-
- First Gear
- Posts: 68
- Joined: Thu Jul 27, 2017 6:05 am
I need some help.. (with my robtune)
So I got my robtune ej20g ecu threw it in did all the correct wiring. Drove it for about a day, the next day I went out to start it and I get crank but no start. Pulled my spark plugs, looked a little worn so I bought a new set. That didn't fix the problem.seems like my ignitor keeps getting burnt out too. Has anyone had this problem before ?
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: I need some help.. (with my robtune)
Moved to electrical and clarified title.
Haven't heard of that happening to anyone before. Have you contacted Rob yet?
Haven't heard of that happening to anyone before. Have you contacted Rob yet?
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- First Gear
- Posts: 68
- Joined: Thu Jul 27, 2017 6:05 am
Re: I need some help.. (with my robtune)
Yeah I sent him an email. It's really weird. I drove it fine for an entire day than it wouldn't start the next morning. I tried to start it again, it turned over but struggled. And now the knock light is constantly flashing..
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: I need some help.. (with my robtune)
The flickering knock light means you have a code or codes. Did you look it up yet?
http://surrealmirage.com/subaru/engine.html
http://surrealmirage.com/subaru/engine.html
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- First Gear
- Posts: 68
- Joined: Thu Jul 27, 2017 6:05 am
Re: I need some help.. (with my robtune)
Okay well I plugged my diagnostic connectors in the black ones and got 21 and 12 so abnormal signal to starter switch and abnormal voltage to water temp.. I changed my coolant temp sensor about a month ago and I'm not to sure what to do about this starter switch
-
- First Gear
- Posts: 68
- Joined: Thu Jul 27, 2017 6:05 am
Re: I need some help.. (with my robtune)
Well I changed the ignitor and it fired right up..
Re: I need some help.. (with my robtune)
Did you buy the 4-2 ignition converter w/your EJ20G ECU or DIY the ignitor?
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
-
- First Gear
- Posts: 68
- Joined: Thu Jul 27, 2017 6:05 am
Re: I need some help.. (with my robtune)
I bought the 4 to 2 ignition converterwtdash wrote:Did you buy the 4-2 ignition converter w/your EJ20G ECU or DIY the ignitor?
Sent from my iPhone using Tapatalk
-
- First Gear
- Posts: 68
- Joined: Thu Jul 27, 2017 6:05 am
Re: I need some help.. (with my robtune)
K all my wiring is done fine.. I've got one issue now. Seems to be running on 3 cylinders. I pull the injector clips and the motor changes how it acts on 1 3 and 4 . But 2 just doesn't do anything. I've got brand new spark plugs in, thought it was the injector so I swapped it with another one I had. I checked the injector clip its self to see if I'm getting power and it pulses as it should. I changed all my fuses to see if that would have been the problem. Im really running out of ideas..
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: I need some help.. (with my robtune)
Did you get this fixed?
Since you had issues with the igniter previously I'd lean towards something with your ignition system.
Since you had issues with the igniter previously I'd lean towards something with your ignition system.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- First Gear
- Posts: 68
- Joined: Thu Jul 27, 2017 6:05 am
Re: I need some help.. (with my robtune)
I went another route haha.Legacy777 wrote:Did you get this fixed?
Since you had issues with the igniter previously I'd lean towards something with your ignition system.
I swapped my heads for 20k heads and intake manifold
Ran an entire harness from a 20k and now I have it running off a 20k ecu
Sent from my iPhone using Tapatalk
Re: I need some help.. (with my robtune)
Ok, at least it's running albeit in a different form.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- First Gear
- Posts: 68
- Joined: Thu Jul 27, 2017 6:05 am
Re: I need some help.. (with my robtune)
Yeah she’s running haha runs really good actually
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk