Turbo Hardware?

That spinning thing that makes all of the cool noises. OE and Aftermarket.

Moderators: Helpinators, Moderators

Post Reply
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Turbo Hardware?

Post by Mattheww044 »

I feel like this is a stupid question or thread to start, but I am putting my JDM TD05 on and I would really like to replace all of the hardware. Studs/bolts/nuts and gaskets. The gaskets aren't hard to find, but I can't find anyone that sells the nuts and bolts. Is there a kit you can buy? I would imagine ordering them from Subaru would be pretty spendy, but if anyone has the part #s that would be awesome.


I plan on getting the gaskets from FP, cuz this is a pretty good deal:
http://store.forcedperformance.net/merc ... RX-TurboHW

they do have the studs on there as well but no nuts or bolts... Just not sure where to find them.

Thanks ahead of time
Legacy777
Site Admin
Site Admin
Posts: 27750
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Turbo Hardware?

Post by Legacy777 »

Unless the threads on the studs and nuts are cross threaded or marred up, there's really no reason to replace them.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Re: Turbo Hardware?

Post by Mattheww044 »

Well mine were very rusted and I rounded a few of them off trying to get at them at the weird angles. I didn't have any pb blaster so that didn't help. I gave them to te guy I sold my td04 too. So I need them now lol I just don't know where to find them
Legacy777
Site Admin
Site Admin
Posts: 27750
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Turbo Hardware?

Post by Legacy777 »

You can find replacement studs at the autoparts store in the section where the "HELP" hardware is. They are cad plated studs and are the correct length, etc. They're not the best application for the turbo since the cadnium plating will burn off, but they work.

I've got a package at home and can get the part # and snap a pic for you.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Re: Turbo Hardware?

Post by Mattheww044 »

Hmmm, well there has to be a part number or something for them, I can try calling the stealership and getting price and #s
wtdash
Fifth Gear
Posts: 2327
Joined: Fri May 04, 2007 4:09 pm
Location: N. ID

Re: Turbo Hardware?

Post by wtdash »

Mattheww044 wrote:Hmmm, well there has to be a part number or something for them, I can try calling the stealership and getting price and #s
I doubt they'd be able to help w/the TD05 - never had 'em over here, so just tell 'em it's a TD04. Should be the same.

Also, those studs are a PITA to get out so be prepared!

TD
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Re: Turbo Hardware?

Post by Mattheww044 »

Yea I was just gonna have them order them for the VF-11 or TD04, same thing should be the same part number but you never know lol.

yea I know that they can be, but my stepdad has a stud remover and that thing works like a charm. It's still not "easy" but definitely easier. If any of you guys have any spare hardware that isn't rusted to hell I would be willing to buy them. Mine is far far away now haha.
Legacy777
Site Admin
Site Admin
Posts: 27750
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Turbo Hardware?

Post by Legacy777 »

Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Re: Turbo Hardware?

Post by Mattheww044 »

hmm. So I would probably need to get 2 sets correct? Since that comes with the studs/nuts, and 2 bolts but no nuts for the bolts? I might go ahead and do that if the stealership ends up wanting any more than 20 or 30$ for everything.
Legacy777
Site Admin
Site Admin
Posts: 27750
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Turbo Hardware?

Post by Legacy777 »

Yeah....it may not be the ideal setup, but it's cheap and works.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Re: Turbo Hardware?

Post by Mattheww044 »

yea, ill call the dealership tomorrow and get a quote and put the PNs up here for people in the future
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Re: Turbo Hardware?

Post by Mattheww044 »

Thanks to Josh for uploading the original FSM and Parts Catalogue I got the stuff. Pretty spendy but I shouldn't have to worry about them seizing up on my anytime soon :D

3x Stud- 8009-10340
2x Bolt- 44059-AA030
8x Nut- 90237-0010
(5 for DP and 3 for UP)
Post Reply