Bypass The Compressor For Quicker Spool?

That spinning thing that makes all of the cool noises. OE and Aftermarket.

Moderators: Helpinators, Moderators

alienvictim
In Neutral
Posts: 8
Joined: Mon Nov 17, 2014 11:02 pm

Re: Bypass The Compressor For Quicker Spool?

Post by alienvictim »

Legacy777 wrote:That's not good! I'd contact ACT as that looks like a material defect or something. I wouldn't think it would break at the power levels you are at.

already did contact them, and i was tuning on a really HEAVILY built engine. so i don't think i'm still at the lower power output i was at. the ACT rep was puzzled and just suggested i do not use unsprung discs anymore.

there's no discoloration of the disc, the pads aren't worn so it didn't fail due to heat or slipping. the center was torn out. and the splines were almost gone.

anyways, just showing what happened when i thought i destroyed my transmission. instead i found this clutch this way.

Image

https://www.rbracing-rsr.com/bmw_clutches.html see section called "Dead puppies"

this is a motoiq article about act clutches.

Image

http://www.motoiq.com/MagazineArticles/ ... tches.aspx

anyways it is what it is.
Legacy777
Site Admin
Site Admin
Posts: 27748
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Bypass The Compressor For Quicker Spool?

Post by Legacy777 »

Yup.....it is what it is.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
kimokalihi
Fifth Gear
Posts: 8360
Joined: Mon Nov 06, 2006 3:41 am
Location: Tenino, WA

Re: Bypass The Compressor For Quicker Spool?

Post by kimokalihi »

As is...everything. lol
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Post Reply