Stock EJ20G low boost?

That spinning thing that makes all of the cool noises. OE and Aftermarket.

Moderators: Helpinators, Moderators

Mpgingerson
First Gear
Posts: 97
Joined: Mon Sep 28, 2015 12:05 pm

Re: Stock EJ20G low boost?

Post by Mpgingerson »

Legacy777 wrote:You don't need to up the boost on the MBC, you just need to see if it will maintain the correct boost pressure as stock. If it does then you know there may be an issue with the boost control electronics or something is up with the input sensors/data that tells the ECU what to set the boost at.
Okay, I'll get hold of a new boost gauge and install the MBC and see what happens :O My best guess is a bad sensor or other electronics since the car boost just fine when it does...

But could it be the O2 sensor maybe? I find it weird that when I drive the car hard and push it the boost suddenly rises.. Maybe the sensor is really clogged up and when I push it the sensor breathes or something.. I don't know haha.

When I achieve full boost by driving the car hard I can be at around 3000-4000 rpm while doing a pull and suddenly the turbo spools up much louder and gives the car more power..
Legacy777
Site Admin
Site Admin
Posts: 27745
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Stock EJ20G low boost?

Post by Legacy777 »

The O2 sensor doesn't affect boost operation since the ECU is in open loop.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply