Td04 setup into a stock 1991 Subaru legacy turbo

That spinning thing that makes all of the cool noises. OE and Aftermarket.

Moderators: Helpinators, Moderators

Post Reply
Jts198465
In Neutral
Posts: 2
Joined: Mon Aug 22, 2016 5:40 am

Td04 setup into a stock 1991 Subaru legacy turbo

Post by Jts198465 »

I am wondering what do I need in order to set my car up with a td04 and tmic into my stock ej22t 91 legacy turbo?
Pntaste4evr99
Winestone Cowboy
Posts: 341
Joined: Thu Mar 26, 2015 4:12 am
Location: Lake Stevens WA

Re: Td04 setup into a stock 1991 Subaru legacy turbo

Post by Pntaste4evr99 »

There's tons of threads on here u can go through to see everything u need. Do a little searching
94 Winestone SS 5MT Rob 550 20g. (Pickle)
Original WA car with 460k miles and climbing
Jts198465
In Neutral
Posts: 2
Joined: Mon Aug 22, 2016 5:40 am

Re: Td04 setup into a stock 1991 Subaru legacy turbo

Post by Jts198465 »

I'm new to legacy central I apologize
Pntaste4evr99
Winestone Cowboy
Posts: 341
Joined: Thu Mar 26, 2015 4:12 am
Location: Lake Stevens WA

Re: Td04 setup into a stock 1991 Subaru legacy turbo

Post by Pntaste4evr99 »

No problem, just a heads up
94 Winestone SS 5MT Rob 550 20g. (Pickle)
Original WA car with 460k miles and climbing
mike-tracy
Moderator
Moderator
Posts: 4986
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Td04 setup into a stock 1991 Subaru legacy turbo

Post by mike-tracy »

Hi and welcome to the forum! Check out the first thread in each section. In this section there's a good thread up top about an 07 wrx intercooler with a td05. Your td04 follows almost all the same steps. The major difference is you'll need to buy a silicone 90* elbow to connect to the factory intake tract.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
Post Reply