Page 1 of 1
Turbo elbow to intake elbow?
Posted: Wed Nov 08, 2017 10:03 pm
by 208ss
So I did a smoke test on my car a work and found out the the guy i bought the car from did not hook up the two elbows from intake to turbo. I know the intake elbow is smaller diameter than the one going to the turbo (td04L).
what are my options of hooking the two together?
pic toinght
Re: Turbo elbow to intake elbow?
Posted: Thu Nov 09, 2017 4:55 am
by 208ss
Re: Turbo elbow to intake elbow?
Posted: Fri Nov 10, 2017 7:30 pm
by monkeyposeur
Re: Turbo elbow to intake elbow?
Posted: Fri Nov 10, 2017 9:02 pm
by mike-tracy
I grabbed a short length of steel exhaust pipe from AutoZone, and cut and deburred the appropriate length
Re: Turbo elbow to intake elbow?
Posted: Mon Nov 13, 2017 9:39 pm
by 208ss
figured it out just bought a 2.4" into 2" elbow and using a 2" pipe to connect the two tubes.
Re: Turbo elbow to intake elbow?
Posted: Mon Nov 13, 2017 11:26 pm
by mike-tracy
Nice! For future searchers, what parts specifically did you use?
Re: Turbo elbow to intake elbow?
Posted: Wed Nov 15, 2017 4:03 am
by 208ss
https://www.ebay.com/itm/2-TO-2-5-4PLY- ... 0A&vxp=mtr
and went to home depot and got a 2" copper pipe and cut to length.
but this elbow will not work with the stock turbo for the 91 legacy. It will work with the td04
