anybody using anAPEXi EBC?

That spinning thing that makes all of the cool noises. OE and Aftermarket.

Moderators: Helpinators, Moderators

Post Reply
lgyee4
In Neutral
Posts: 47
Joined: Sun Nov 24, 2002 4:53 am
Location: San Francisco

anybody using anAPEXi EBC?

Post by lgyee4 »

I've been thinking about a boost controller and was wondering if anyone has as electronic boost controller installed. I've heard about the APEXi and others but what has been a sucessful device to use? :roll:
1993 Turbo Wagon Stock w/turbo back 3"exh, KYB's
DLC
Site Admin
Site Admin
Posts: 2775
Joined: Tue Oct 15, 2002 1:58 am
Location: Utah
Contact:

Post by DLC »

I've used an AVC-R for over two years, though i still don't know very much about its specifics and all of the stuff it can do. It's been a worthwhile investment though.

Dave
Legacy Central
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
lgyee4
In Neutral
Posts: 47
Joined: Sun Nov 24, 2002 4:53 am
Location: San Francisco

Post by lgyee4 »

I've got a ton of questions: like installation; did you install it yourself? is it a plug and play device? How about programming? is it straightforward enough to be done by yourself? Other mods to help? ie. fuel management, IC, exhaust, ... Ever had reliability issues?
thanks, Larry
1993 Turbo Wagon Stock w/turbo back 3"exh, KYB's
ej22t
Second Gear
Posts: 351
Joined: Tue Oct 15, 2002 1:38 pm
Location: Markham, Ont. Canada
Contact:

Post by ej22t »

I have the AVC-R for about 2 year also and I installed all by myself.
You have to make sure all the wire from your ecu pin out and you have to do some hose re-route for the installation!
The unit only control the boost, I also runs with the 93 WRX intercooler and I am now with BC5 engine so the boost is set around 16psi.
The unit is well design but you have to put lots of time to do the setting since it really hard to give it a good setting. You could do your setting while you are driving or ask someone to drive your car and you could do the setting!

Ben
92 Legacy turbo with EJ20G engine swap \(^0^)/
DLC
Site Admin
Site Admin
Posts: 2775
Joined: Tue Oct 15, 2002 1:58 am
Location: Utah
Contact:

Post by DLC »

I had it professionally installed and setup.

It's rather complicated, honestly, so if you're interested in it, i'd download the manuals from Apexi and look over them.

DAve
Legacy Central
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
ej22t
Second Gear
Posts: 351
Joined: Tue Oct 15, 2002 1:38 pm
Location: Markham, Ont. Canada
Contact:

Post by ej22t »

Hi Dave, could you post your set up on the AVC-R that I could have a try?

Ben
92 Legacy turbo with EJ20G engine swap \(^0^)/
DLC
Site Admin
Site Admin
Posts: 2775
Joined: Tue Oct 15, 2002 1:58 am
Location: Utah
Contact:

Post by DLC »

I'm not sure what you're looking for. Mine's probably out of tune since it was installed in an automatic and is now a 5MT.

Dave
Legacy Central
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
eastbaysubaru
Knowledgeable
Knowledgeable
Posts: 1312
Joined: Wed Oct 16, 2002 10:44 pm
Location: Northern Sonoma County
Contact:

Post by eastbaysubaru »

That's fine Dave, some of us have (and plan to keep) the automatic that came with the car. It could prove useful in the future for some of us.

-Brian
'04 PSM FXT
ej22t
Second Gear
Posts: 351
Joined: Tue Oct 15, 2002 1:38 pm
Location: Markham, Ont. Canada
Contact:

Post by ej22t »

Don't worry Dave, shear your data on the AVC-R, I will post mine after I copy the setting tomorrow.

Ben
92 Legacy turbo with EJ20G engine swap \(^0^)/
Post Reply