is there anyway to control timing? Other than a standalone ECU?
Mark,
Detonation, Fuel Cut, or Something Else?
Moderators: Helpinators, Moderators
boost-timing controller. MSD makes one......there are add-on options.....but they do cost money
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Second Gear
- Posts: 428
- Joined: Sun Apr 20, 2003 3:45 am
- Location: Brisbane, Australia
- Contact:
a lot of us over here have put one way valves in place of the bleed valve so it runs the standard fuel map up to manifold pressure then it begins to run really rich it eliminates fuel cut and you can run a little bit higher boost for a little bit longer, fuel economy goes out the window however.
MY02 B4 Liberty, 2 1/2" off the primary with splitter, 3" off the secondary, 3" the rest of the way, completely stainless, k&n filter, ECUtek 3, 500HP walbro, 173kw@all4