Deals on JDM Turbos, Exhaust manifolds, uppipes, and AWIC's

Parts and services from sanctioned vendors and businesses.

Moderator: Moderators

Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Deals on JDM Turbos, Exhaust manifolds, uppipes, and AWIC's

Post by Legacy294 »

As listed:

less than 40K JDM turbos: (1) TD04, (3) VF10s, and (2) VF8s, all free spinning w/little to no shaft play- $125 + shipping

Exhaust Manifolds (crossover pipe), higher flow than US: 3-$75 + shipping

Uppipes, higher flow than US: (4) -$50 + shipping

AWICs: (4) 2, in good shape, other two slightly dinged- $75 + shipping, $50 + shipping

These are off of early 90's Legacy/ Liberty Turbo, and WRXs. Also have EJ20G DOHC closed deck JDM engines complete if you looking for a good swap engine for an SS or touring wagon..

Post, Pm, or Email if you are interested.
Thanks for looking.
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
azn2nr
Fifth Gear
Posts: 2412
Joined: Sun Nov 30, 2003 8:02 am
Location: salt lake city

Post by azn2nr »

do you have front clips or front cuts or jsut motors.
-jason
[quote="Scoobyniteowl"] Chasin' @$$ is a great form of exercise and if you do get any, then that is more exercise[/quote]
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

have complete engines in stock.

Have a few early clips (Ver1- Ver3 WRX and STi) available with all wiring, ECU, crossmember, control arms, brakes, and usually trannies. Starting at $3200 + shipping. :grin:
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
Matt Monson
quasi-mod-o
quasi-mod-o
Posts: 2574
Joined: Sun Nov 09, 2003 8:24 pm
Location: Ghetto Garage, CO, USA
Contact:

Post by Matt Monson »

What about the inlet plumbing with BOV for the AWIC's?
1974 Porsche 914 Cam Am Limted Edition AKA the Bumble Bee
1973 Porsche 914 2.0 l -Suby swap pending
1968 Porsche 911t survivor 47k original miles
2000 2.5RS daily driver.
1999 2.5RS w/ 50+ extra whp
Suby Hai!
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

Need to double check and get back to you..
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
azn2nr
Fifth Gear
Posts: 2412
Joined: Sun Nov 30, 2003 8:02 am
Location: salt lake city

Post by azn2nr »

Legacy294 wrote:have complete engines in stock.

Have a few early clips (Ver1- Ver3 WRX and STi) available with all wiring, ECU, crossmember, control arms, brakes, and usually trannies. Starting at $3200 + shipping. :grin:
thoes have dash boards too? are the harness cut? is it the compleete car harness or jsut the motor harness? can you finance?
-jason
[quote="Scoobyniteowl"] Chasin' @$$ is a great form of exercise and if you do get any, then that is more exercise[/quote]
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

Matt,

Sorry no inlet piping or BOV for the AWICs.. :sad:

azn2nr,

These come with complete harnesses, no dash (too many people making RHDs), ecu, and the complete engine/ turbo, intercooler and the other stuff that was listed..Sorry no financing available.. Nice clips though.. :grin:
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
azn2nr
Fifth Gear
Posts: 2412
Joined: Sun Nov 30, 2003 8:02 am
Location: salt lake city

Post by azn2nr »

whats wrong with rhd? it makes the swap so much easier
-jason
[quote="Scoobyniteowl"] Chasin' @$$ is a great form of exercise and if you do get any, then that is more exercise[/quote]
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

nothing is wrong with RHD.. Check out the JDM Ver 2 STI LTD on my page (our wheels section), full RHD conversion car..

Unfortunately, both the US and Japan don't want these cars imported and and put back on the road with RHD. That's the reason dashes aren't included..

The Fast and the Furious pretty much spoiled that for us.. :x

before that, many people had no idea what "JDM" meant..
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

Just found out I can get you a Ver 5 dash and RHD rack for $750..
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Re: Deals on JDM Turbos, Exhaust manifolds, uppipes, and AW

Post by Legacy294 »

Updated..

less than 40K JDM turbos: (1) TD04 *pending sale*, (3) VF10s, and (1) VF8s, all free spinning w/little to no shaft play- $125 + shipping

Exhaust Manifolds (crossover pipe), higher flow than US: 2-$75 + shipping

Uppipes, higher flow than US: (4) -$50 + shipping

AWICs: (4) 2, in good shape, other two slightly dinged- $75 + shipping, $50 + shipping

These are off of early 90's Legacy/ Liberty Turbo, and WRXs. Also have EJ20G DOHC closed deck JDM engines complete if you looking for a good swap engine for an SS or touring wagon..

Post, Pm, or Email if you are interested.
Thanks for looking and buying...[/quote]
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
azn2nr
Fifth Gear
Posts: 2412
Joined: Sun Nov 30, 2003 8:02 am
Location: salt lake city

Post by azn2nr »

thats weird that you guys arent getting the dashes with your clips. everyone on ebay and anyone on nasioc selling clips come with dashes. odd i tell ya odd
-jason
[quote="Scoobyniteowl"] Chasin' @$$ is a great form of exercise and if you do get any, then that is more exercise[/quote]
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

Looked hard on nasioc for clips and found none.. with or without dashes.

How many clips have you had a hold of recently with dashes?

Most of the recent ones I've come across have not had dashes. They all used to a few years ago..
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
stant093
Voluntarily Dismissed
Posts: 410
Joined: Tue Jul 08, 2003 3:40 pm

Post by stant093 »

we picked up a forester front clip complete wioth a dash, i never thought it would come to this....theres good money in a late model dasha nd it looks like theyre catching on and ganking em......



Pm to Legacy294 in regards to these:

Exhaust Manifolds (crossover pipe), higher flow than US: 2-$75 + shipping

Uppipes, higher flow than US: (4) -$50 + shipping
bmxpunk
Third Gear
Posts: 826
Joined: Sun Apr 03, 2005 6:01 am
Location: Casper, WY
Contact:

Post by bmxpunk »

oh I got a manifold!!!! Bam!!!
2011 Mini Countryman S All4
1970 Honda Ct90
2001 Forester S of Doom - mowed down by a Cummins
1994/5/6/01/02/03/04/06/07/08 Impregacy OUtback SS STi Type R money pit- NEW RALLYCAR!!
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

There are now (3) VF10s left as far as the turbos go..

and (2) of the JDM crossover pipes.

Still have the other stuff for sale too.. :D
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

What's the difference between the JDM crossover pipe?

I think hardy (thawa) posted pics of the difference between the JDM headers and the USDM headers.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
SuperRallyRoo
Third Gear
Posts: 606
Joined: Tue Dec 17, 2002 11:09 pm
Location: Tacoma, Wa

Post by SuperRallyRoo »

I definatly want a VF8 and a AWIC if you still have them available... Preferably the nicer of the Awic's and the NO shaft play turbo. heh.
I'll call you tomorrow.
Legacyless
98 Jetta TDI
vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 »

Hey Legacy294, what ever happened with our transaction? You did something different from what you said you were gonna do and haven't replied to my emails... I'm only out a few dollars so I'm not upset about the money, but I would at least appreciate an explanation.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
Legacy294
Vendor
Vendor
Posts: 323
Joined: Wed May 05, 2004 10:47 pm
Location: Bend, Or.
Contact:

Post by Legacy294 »

vrg3,

I replied a couple of weeks ago, before xmas..The refund on the TD04 was established asap (have another one coming). The other issue was that there was a VF10 tagged/ inventoried as a VF8 . That wasn't established until I got ready to ship it, and double checked the stamping on the housing. At any rate, I'd rather refund your money until I get more turbos into inventory, instead of keeping you hanging, wondering what's up.. Also, if there is a balance that I owe you, please let me know, and I'll get it settled asap.. Customer service is something that's very important to me. :D

Very sorry for the inconvenience.

Happy New Year!
'96 GF/STi Rally wagon, under construction

If it's mechanical, it WILL break...
www.allwheelsdriven.net
vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 »

Hm, your reply before Christmas seems to never have made it into my Gmail box.

Anyhow, that makes sense... As it turns out, this is good for me, since right now money is more useful to me than spinny mufflers. And I do appreciate you not hanging to my money for no reason.

You don't owe me any balance exactly; I just got hit with the PayPal fee on the eCheck you sent as the refund. This also means you're out the PayPal fee on my original payment to you.

If I may offer a suggestion, I would advise you to use PayPal's "refund payment" feature in the future. The button should appear next to payments received in your history. When you do it that way, PayPal simply undoes the transaction, including any fees they may have originally charged you.

Anyhow, thanks for the explanation. We're good now.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
dirtyhandssubaru555
First Gear
Posts: 169
Joined: Thu May 24, 2007 12:36 am
Location: Wenatchee, WA

Post by dirtyhandssubaru555 »

are any of those turbos clocked 90*?
my girlfriend finaly found out that i spent more money and time on my car then her. she was kind pist to say the least.
92ss, tdo4, wrx stage 1 clutch and 9.5 pound flywheel, sti springs, k&n panel filter, desnorkus
86 gl hatchback rip
87 gl10 rip
IronMonkeyL255
Fourth Gear
Posts: 1902
Joined: Sat Aug 09, 2003 5:02 pm
Location: Woodruff, SC

Post by IronMonkeyL255 »

If they are from EJ20G cars as he stated, they all should be.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.

That being said, everything I post is accurate to the best of my knowledge.

Rio Red '91 Legacy SS
yazmo
Third Gear
Posts: 673
Joined: Wed Apr 16, 2008 6:05 pm
Location: Canada

Post by yazmo »

Legacy777 wrote:What's the difference between the JDM crossover pipe?

I think hardy (thawa) posted pics of the difference
between the JDM headers and the USDM headers.



yeah what the difference i would like to know also
any picture would be great
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

Post by 555BCTurbo »

Holy 3 year old thread resurrection batman!
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
Post Reply