Cusco type 2 lower arm bar

kelley · Post by **kelley** » Wed Nov 02, 2005 8:46 pm

This chasis brace is like new and im perfect condition.
It is for gc chasis, but fits bc legacy's as well.

$100.00+ shipping

Post by **Legacy777** » Wed Nov 02, 2005 9:47 pm

Got a pic? Have you run these bars on the BC chassis to see if it actually adds anything?

kelley · Post by **kelley** » Wed Nov 02, 2005 10:27 pm

Hey Josh,
I used this on my 94 legacy for a short time, it does make a differance, as there are improvements in rigidity that can be made on a bc.
http://www.i-club.com/forums/showthread.php?t=116718

Legacy777 wrote:Got a pic? Have you run these bars on the BC chassis to see if it actually adds anything?

Post by **Legacy777** » Thu Nov 03, 2005 3:07 am

Damn......just had an alignment....and if I put this on....it'll probably scew things a little.

Looks like you have a tentative buyer on i-club though.

Post by **DLC** » Thu Nov 03, 2005 7:36 pm

I really liked mine on the BF, it tightened everything up. They also fit the BE, but it hangs much lower for some reason, so I chose not to put one on.

Post by **Legacy777** » Thu Nov 03, 2005 8:10 pm

How much lower does it hang on the BC/BF chassis?

Right now the exhaust is the lowest thing.

Post by **DLC** » Thu Nov 03, 2005 11:06 pm

It'd probably be close to as low as your exhaust. I can't say that I never hit anything with it, but I know it dragged a bit when driving through snow. Not exactly a problem where you're at.

I don't think I ever got any good pics of what it looked like head-on, but here's my write-up:

http://legacycentral.org/library/cusco_lower.htm

kelley · Post by **kelley** » Fri Nov 04, 2005 4:31 am

Clearance was never an issue for me, and my car sat about 1.5-2 inches lower than stock
but I'm not the type of driver that drives fast in to driveways and such.

Legacy777 wrote:How much lower does it hang on the BC/BF chassis?

Right now the exhaust is the lowest thing.

Post by **Legacy777** » Fri Nov 04, 2005 4:59 am

Damn...it's very tempting....

kelley, let me know if you don't sell it to the guy on i-club.

kelley · Post by **kelley** » Fri Nov 04, 2005 5:07 am

Legacy777 wrote:Damn...it's very tempting....

kelley, let me know if you don't sell it to the guy on i-club.

Still available!

ej22t · Post by **ej22t** » Fri Nov 04, 2005 7:37 am

Its a good bar that I have in my 92 turbo, it only fits with turbo crossmember, I got it from my friend who had order for his 98 2.5RS but when he try to install that he find out it won't fits and it only fits all turbo from 91-01 Legacy and WRX only.
It is very light weight and its good low chass upgrade.

Good luck
Ben

THAWA · Post by **THAWA** » Fri Nov 04, 2005 8:18 am

Legacy777 wrote:Damn......just had an alignment....and if I put this on....it'll probably scew things a little.

Looks like you have a tentative buyer on i-club though.

Why? You're not moving anything that affects the alignment.

Post by **Legacy777** » Fri Nov 04, 2005 3:03 pm

THAWA wrote:
Legacy777 wrote:Damn......just had an alignment....and if I put this on....it'll probably scew things a little.

Looks like you have a tentative buyer on i-club though.
Why? You're not moving anything that affects the alignment.

I suppose so.....you'll get a little change in the bolts, but it shouldn't be too much to matter

Post by **Legacy777** » Fri Nov 04, 2005 3:05 pm

kelley wrote:
Legacy777 wrote:Damn...it's very tempting....

kelley, let me know if you don't sell it to the guy on i-club.
Still available!

pm'd ya.

dscoobydoo · Post by **dscoobydoo** » Fri Nov 04, 2005 9:34 pm

Highly recommended. I have one and between that and the FSTB the front end is very tight!

Free bump!

kelley · Post by **kelley** » Sat Nov 05, 2005 12:43 am

pm sent!

kelley · Post by **kelley** » Sat Nov 05, 2005 3:46 am

SOLD!

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Cusco type 2 lower arm bar

Cusco type 2 lower arm bar