Round Two: Standalone scan tools, for non-turbos too

Parts and services from sanctioned vendors and businesses.

Moderator: Moderators

SubyinaVW
In Neutral
Posts: 1
Joined: Mon Feb 09, 2009 2:57 am

Post by SubyinaVW » Mon Feb 09, 2009 3:02 am

Vik,

Are you still making these great tools? If so, I would like to get one.

I have a NA '91 EJ22 legacy engine installed into my VW Vanagon. The free B10 tool does work on these conversion, but I really want an independent scan tool that does not require a laptop. I'm also still trying to get the B10 working on my Vanagon, but think its more of my laptop causing the troubles.

[/u]

Legacy777
Site Admin
Site Admin
Posts: 27481
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 » Thu Feb 12, 2009 7:30 pm

No I don't believe he is.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:

Post by vrg3 » Tue Jun 02, 2009 1:18 pm

I don't plan on building any more in the near future. It really does take a long time and these days I don't find myself with very much of that.

It's also harder to work up the motivation now that I've been screwed out of hundreds of dollars by a fellow board member over this device.

If that changes, I'll be sure to post up here though.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212

skid542
Fifth Gear
Posts: 2857
Joined: Fri Dec 26, 2003 6:37 am
Location: North Idaho
Contact:

Post by skid542 » Tue Jun 02, 2009 7:49 pm

That's a real shame to hear. This tool is hands down the coolest thing on my car. I truley lose sleep over the thought of mine dying from years of use and you not being around so I can buy another.


But that aside - WELCOME BACK!
Lee

93' SS, 5mt swapped, 182k, not stock...
96' N/A OBW 5sp, 212k, Couple mods... RIP
99' N/A OBW, 4eat, mostly stock.

soobrdad02
First Gear
Posts: 186
Joined: Sat Sep 12, 2009 4:01 am
Location: Richmond, VA

Post by soobrdad02 » Wed Jan 27, 2010 8:49 am

Just read through the thread for the first time and the "scan tool" looks awesome! i know that you aren't making them any longer and I wanted to know if the plans to work one up were floating around out in cyberspace somewhere, or if you could recommend a similar tool. Having been a tech years ago, I miss the ability to scan problems and scope out what's going on with the car. Any advice would be greatly appreciated, thanks.
"All four wheels spin? Huh, that's AWD..."

*1991 Legacy wagon, 4EAT, n/a*
*1966 Chevrolet C-10 pick-'em-up*

Post Reply