Post your FMIC's!

livestrong14 · Post by **livestrong14** » Tue May 20, 2008 3:02 am

Hey guys,

Looking for pictures from those of you with FMIC's on your sport sedans. Looking to see how the piping can be ran, sizes of pipes, cores, etc.

Thanks!

-Devan

555BCTurbo · Post by **555BCTurbo** » Tue May 20, 2008 3:32 am

What...no more AWIC?

livestrong14 · Post by **livestrong14** » Tue May 20, 2008 3:36 am

Donating it to my dad

ciper · Post by **ciper** » Tue May 20, 2008 5:01 am

Want to buy another one?

livestrong14 · Post by **livestrong14** » Tue May 20, 2008 5:08 am

Nope, thanks anyways.

Anybody running a FMIC?

ciper · Post by **ciper** » Tue May 20, 2008 5:14 am

I saw a turbo wagon recently that was a total sleeper. It had a black FMIC that seemed to be exactly the right sized core for the lower opening (below the bumper). The guy driving it was at least in his fifties...

smh0101 · Post by **smh0101** » Tue May 20, 2008 6:09 am

livestrong14 wrote:Nope, thanks anyways.

Anybody running a FMIC?

My suggestion would be... talk to Andy and David... They will both give you good advice.

David told Andy how to do it... and davids looked really good on the blue car (you know, the one that lasted all of a week).

And Nick, I know you dont like Andys FMIC... But its his car and he did a very nice job.

kleinkid · Post by **kleinkid** » Tue May 20, 2008 7:02 am

Can you imagine that, someone with an IC on their old Legacy, in their fifties! Must be in a midlife crisis or male menopause.

know1 · Post by **know1** » Tue May 20, 2008 7:11 am

I dunno how old Subtle is, but he has a mean leg with a stealth fmic and he is up around there. One cool guy.

smh0101 · Post by **smh0101** » Tue May 20, 2008 7:12 am

Or with a very very very nice Autronic system and an STi 6mt?

hahahha

So which is it, midlife crisis, or male menopause.

BXSS · Post by **BXSS** » Tue May 20, 2008 1:38 pm

ciper wrote:I saw a turbo wagon recently that was a total sleeper. It had a black FMIC that seemed to be exactly the right sized core for the lower opening (below the bumper). The guy driving it was at least in his fifties...

Sounds like my pops driving the SS but I'm on the other side of the US & he did not want me paint the FMIC black.

I have a few FMIC/EJ20G pics, but I'm too dumb to post them....

92ss satinsvoice · Post by **92ss satinsvoice** » Tue May 20, 2008 4:18 pm

thanks spence. if i can get those pics from you i could post them! lol.

93forestpearl · Post by **93forestpearl** » Tue May 20, 2008 5:57 pm

I may have the stealthiest FMIC there is. With slim fans and moving the radiator back about an inch, there was enough room for a 3.5" core. The core itself is 24x6.5x3.5. If I wanted to, I could flatten the tabs on the back of the bumper beam and go straight down with a larger core, which I plan on doing when I go to a 35R next summer.

Post by **Legacy777** » Tue May 20, 2008 5:59 pm

Dan,

I like your vacuum pump re-route for the cruise control

93forestpearl · Post by **93forestpearl** » Tue May 20, 2008 6:19 pm

Now if it would only work!! I didn't think about switching the wiring harness in the dash when I swapped it. The dash was out of an auto SS and my car is a manual L. It doesn't even turn on. I have everything hooked up but I get nothing.

It does other weird stuff, such as the trunk light, which I never even knew existed, is on unless I turn the headlights on, then it turns off.

I just need to do some real trouble shooting, when I get the time. I'd rather get that VLSD in first....

BXSS · Post by **BXSS** » Tue May 20, 2008 11:53 pm

SubaruNation is going to post the pics for me.

They will show the ebay GC8/GF8 FMIC kit with 31"x 12"x 3" (about 26"x 12"x 3" core) intercooler mounted on the SS with ej22t, then the same FMIC kit on the EJ20g.

To get this FMIC to fit on a SS/ej22t 1 pipe had to be redone, while the other 3 were able to be used with slight mods. The pipes exit/re-enter the engine compartment via a 3" hole (My buddy has big holesaws!) behind each headlight.
We reworked all of the pipes (4 solid pipes 6 connectors used in the whole system) & relocated the battery to the trunk to get a nice fit on the EJ20G, but I could have gotten away with a new coolant tank.
Note: The EJ20G pics were taken the day after we swapped that engine in & redid the pipes (Measuring/cutting & TIGing Aluminum Tubes together + swapping a motor = A LONG DAY!), so the FPR & Coil pack brackets had not been made yet, but you can see the custom coolant tank bracket that allowed space for the I/C tubing.

All of the pics were taken before I had a chance to sand & polish the tubes so they are not their prettiest form.

I notched the bumper beam to create a pocket for the FMIC to fit behind. It would have been easier to just chop the center section of the beam off all-together, but there is still alot of beam to cushion the IC core from morons who can't parallel park the way I did it.

If I had to do this over again I would have mounted this the way my buddy wanted to with the inlet/outlet on the top of the IC core (an easy 2.5-3' less tubing) instead of going for the more bolt-in way we mounted it.

Overall I'm happy with the kit & to my surprise did not notice any additional lag when used with the VF11 on the ej22t - & I was looking for / expecting lag.
It responded very well with the EJ20G/TD04 set-up, & is still being used with the 16G.

BAC5.2 · Post by **BAC5.2** » Wed May 21, 2008 12:19 am

My FMIC was pretty good. You REALLY had to look for it.

I bet that silver T-wagon was Subtle.

jake15 · Post by **jake15** » Wed May 21, 2008 1:47 am

here is an outside shot

if i painted the core black it would definitely be a little stealthier... but i love the way it looks

its a modified blitz kit with a a piece or two of a perrin pipe so i didn't have to weld a BOV bung onto it (teh aluminum welding>me)

those pics are mid install so ignore all the random crap lying around and missing intake.

and for the battery since the pipe runs right through where the battery goes i ended up using a smaller honda battery because i'm too lazy to move it to the trunk

Kelly · Post by **Kelly** » Wed May 21, 2008 1:54 am

Theres enough room under the headlights to sneak em through, if you dont mind sacraficing the bumper beam.

Brandos sportin my fogs

And this is the EJ20H intake plenum. Sits up high enough to run the pipes through after bending the fuel lines a bit.

This pic doesnt show very well, but the IC pipes go straight down through the trays the Batt and ABS unit sit on. Lots of room there if your down with doing a bit of relocation.

Post by **Legacy777** » Wed May 21, 2008 5:30 pm

93forestpearl wrote:Now if it would only work!! I didn't think about switching the wiring harness in the dash when I swapped it. The dash was out of an auto SS and my car is a manual L. It doesn't even turn on. I have everything hooked up but I get nothing.

It does other weird stuff, such as the trunk light, which I never even knew existed, is on unless I turn the headlights on, then it turns off.

I just need to do some real trouble shooting, when I get the time. I'd rather get that VLSD in first....

From what I found with my swap, the cruise computer needs to match the type of trans. The relays are different, and cause it not to work. I think you could probably rig something up, but at the time I decided to just swap the cruise computer since I had one at my disposal.

Yeah it sounds like you have some weird gremlins at work. But I agree.....VLSD is probably worth putting in first.

93forestpearl · Post by **93forestpearl** » Wed May 21, 2008 7:03 pm

I do have the auto cruise control computer sitting in a box somehwere. Maybe I'll have to give it a shot. Now if it was easy to get at without pulling the dash back

biggreen96 · Post by **biggreen96** » Wed May 21, 2008 8:49 pm

Here's mine- made from half a f350 intercooler and press bent exhaust pipes. Total cost under $300. However it is totally ghetto.

livestrong14 · Post by **livestrong14** » Thu May 22, 2008 12:22 am

Thanks for the replies guys! So the general consensus is going with a GC8 spec kit and making it fit? As apposed to going with a 02+ WRX kit?

Thanks again! You guys rock!

BXSS · Post by **BXSS** » Thu May 22, 2008 12:35 am

My pics are still not up, PM me & I'll send you some J-pegs of the GC8 FMIC on a SS.

SubaruNation · Post by **SubaruNation** » Thu May 22, 2008 6:23 am

here are BXSS's shots:

Ebay GC8 FMIC kit on the ej22t, the other is the Ebay FMIC on the EJ20G

[img]

on 2nd thought you sent me the way wrong pictures HA HA HA!
i emailed you, all i got was these..

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Post your FMIC's!

Post your FMIC's!