TD04 and 06 tmic question.
Posted: Thu Dec 11, 2014 8:13 am
So, im mechanically inclined, however I want to run by this install with you guys and I want to see what I'm missing before i tackle it.
TD04 straight forward, unbolt vf11, reverse order TD04 on it. just need a silicone 90 for intake yes?
06 tmic.
I have to cut the clutch reservoir down to 2" .
move the radiator fill resevoir over a little bit for some more room.
Get a 45 elbow fabricated up to reach the Y pipe off the intercooler.
The thing I believe I'm missing is what to do with the BPV...i was thinking block off plate since I'm running a atmospheric dump...and also the culprit why the car is running pig rich
And I need to let it breath by doing 3" turbo back exhaust unless you believe 2.5" will suffice.
Any thoughts would be appreciated.
TD04 straight forward, unbolt vf11, reverse order TD04 on it. just need a silicone 90 for intake yes?
06 tmic.
I have to cut the clutch reservoir down to 2" .
move the radiator fill resevoir over a little bit for some more room.
Get a 45 elbow fabricated up to reach the Y pipe off the intercooler.
The thing I believe I'm missing is what to do with the BPV...i was thinking block off plate since I'm running a atmospheric dump...and also the culprit why the car is running pig rich
And I need to let it breath by doing 3" turbo back exhaust unless you believe 2.5" will suffice.
Any thoughts would be appreciated.