tmic vac line

Front, Top, Air, Water.

Moderators: Helpinators, Moderators

Post Reply
208ss
First Gear
Posts: 99
Joined: Wed Jan 01, 2014 7:04 pm
Location: boise. id

tmic vac line

Post by 208ss »

So how do you guys route your vac lines with a TMIC. I have a 91 ss that did not come with a TMIC and the person i bought the car from installed one and some of the vac hoses are not routed right. Some are kinked. Other note the car has a wrx 2.0 block with 22t heads. So the vac port up front is not there.
The TMIC is off a 06 wrx I think.
1991 subaru legacy sport sedan
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: tmic vac line

Post by Legacy777 »

Are you referring to the crankcase vent lines?

If so, most people figure out whatever way they can route them. However, it's important to keep the modified routing functioning the same as the stock setup.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
cj91legss
Fifth Gear
Posts: 6322
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: tmic vac line

Post by cj91legss »

Just out of curiosity, do you have a pic of the car?

There's a vacuum reference diagram on the bottom of the hood. If you follow that and make sure everything is hooked up accordingly, you'll have better peace of mind.
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
208ss
First Gear
Posts: 99
Joined: Wed Jan 01, 2014 7:04 pm
Location: boise. id

Re: tmic vac line

Post by 208ss »

i will get photos tonight
1991 subaru legacy sport sedan
208ss
First Gear
Posts: 99
Joined: Wed Jan 01, 2014 7:04 pm
Location: boise. id

Re: tmic vac line

Post by 208ss »

Image
1991 subaru legacy sport sedan
208ss
First Gear
Posts: 99
Joined: Wed Jan 01, 2014 7:04 pm
Location: boise. id

Re: tmic vac line

Post by 208ss »

This mess. Kinked hoses... missing parts?
1991 subaru legacy sport sedan
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: tmic vac line

Post by mike-tracy »

The long out of production factory hoses had nice molded bends in em. I've used those plastic 90* elbows and a T in the appropriate sizes, from autozone.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
cj91legss
Fifth Gear
Posts: 6322
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: tmic vac line

Post by cj91legss »

You'll have to use a different photo sharing site. We cant see anything from photobucket.
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
Post Reply