Trouble connecting outback catback on my 93 N/A

Headers, cats, uppipes, downpipes, midpipes and mufflers.

Moderators: Helpinators, Moderators

Post Reply
speezly
Second Gear
Posts: 281
Joined: Fri Oct 22, 2010 2:12 pm
Location: Hampton Roads, VA

Trouble connecting outback catback on my 93 N/A

Post by speezly »

So I recently decided to switch to a single tip exhaust and ended up finding a catback off of a 98 legacy outback and paired it with some dual port headers and cat section from another legacy outback. When attempting to connect the catback to the cat, I found the new walker donut gasket is too small to fit onto the cat, and the old gasket that was on the cat is too big to fit inside the catback. Is this just because I suck at life? Should I try a genuine Subaru gasket? Any suggestions will help. Thanks in advance
93 Legacy l AWD 5mt
87 GL-10 Turbo 5mt
oldscoobyturbo
Second Gear
Posts: 506
Joined: Mon Oct 06, 2008 5:25 pm
Location: burlington, ontraio, canada

Re: Trouble connecting outback catback on my 93 N/A

Post by oldscoobyturbo »

measure the catback flange and see what size it is. I know the aftermarket gaskets vary in size.
check out the size of the bosal one 256-305 sold at autozone etc.. $7
If memory serves me correct that is the one that fit
Silver 99 Legacy GT Wagon
White 90 BC5 RS Type RA
Black 01 Legacy Outback H6 Wagon
http://s684.beta.photobucket.com/user/d ... l/library/
Post Reply