Enduring Solutions ECU board and why you should buy it

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

wtdash
Fifth Gear
Posts: 2297
Joined: Fri May 04, 2007 4:09 pm
Location: N. ID

Re: Enduring Solutions ECU board and why you should buy it

Post by wtdash »

Alphius wrote:Maybe Mike can chime in with his ESL experience, but for me on a 20G ECU with a RobTune, it took two or three starts literally every single time the temperature was below 50* or so. Seems like different people have different degrees of issues.
+1 (or 3)
Turbo Subies:
'87 GL-10 Turbo 4WD Wagon (pre-Loyale) - SOLD
'90 BJ, EJ22T/DOHC and 5-speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX GG-SOLD
'96 BD - turbo'd-SOLD

mike-tracy
Moderator
Moderator
Posts: 4972
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Enduring Solutions ECU board and why you should buy it

Post by mike-tracy »

I had the robtune, and it would cold start frequently. Nothing to do with the tune itself. I now have the ESL and it does a cold start problem maybe once every couple months. The esl is great, but I'm not really utilizing it to it's potential because I'm running the car with the same exact setup as when I had the robtune.

So if you're happy with a td05 on a stock 22t or even a ej20g, and don't plan to upgrade too far beyond that, the ESL is a waste of money. Another consideration about the ESL or any tunable ecu, is who's going to tune it. I'm not sure if most tuners will touch something that's non mainstream. The robtune has launch control and shows knock instances on your dash (it uses the CEL as the indicator), the compatible version of the ESL does not.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote:
Mon Jan 14, 2002 10:23 am
Wait....I'm confused now.

carfreak85
First Gear
Posts: 158
Joined: Fri Jan 16, 2004 12:04 am
Location: Bell-something, WA
Contact:

Re: Enduring Solutions ECU board and why you should buy it

Post by carfreak85 »

@Mike-tracy, where did you get your ESL tuned?
1975 Superstar Wagon
1984 GL-10 Turbo-Traction Wagon
1984 GL-10 Turbo-Traction Hardtop
1987 RX coupe
1987 RX Type RA
2002 WRX sedan

mike-tracy
Moderator
Moderator
Posts: 4972
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Enduring Solutions ECU board and why you should buy it

Post by mike-tracy »

A friend of mine tuned it. I'll let him chime in if he wants to.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote:
Mon Jan 14, 2002 10:23 am
Wait....I'm confused now.

Alphius
Fourth Gear
Posts: 1204
Joined: Mon Aug 31, 2009 9:09 pm
Location: Rochester, WA

Re: Enduring Solutions ECU board and why you should buy it

Post by Alphius »

I tuned Mike's car.

mike-tracy
Moderator
Moderator
Posts: 4972
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Enduring Solutions ECU board and why you should buy it

Post by mike-tracy »

My ESL is still running good after a couple years, and I just checked their website (http://www.enduringsolutions.com) and the price is down to £315. I paid £410. A really good deal if your local tuner is willing to deal with it.

They never added the "motorsport pack" to the ej20g version, that's strictly for the ej20k as an extra cost option. To be honest, I probably used "Launch Control" on my robtune a handful of times. Always on dirt, except for that one time when I was showing off to a friend, and literally blew up an 03 WRX trans lol.

Also, even though ESL mentioned their chip being able to run wasted spark (on a facebook post from a few years back), I did not see that option in the software. You'll have to run an ignition converter, just like with the robtune. If you have dohc heads, it's a perfect excuse to upgrade to coil-on-plug.

If I could do it again, I would get the plug and play "Link WRXLINK Ver 1/2." Its double the price at a minimum, but many/most tuners are at least somewhat familiar with it, and you can use additional input/outputs beyond those in the stock Subaru harnesses. I hear the tuning software is significantly more advanced.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote:
Mon Jan 14, 2002 10:23 am
Wait....I'm confused now.

carfreak85
First Gear
Posts: 158
Joined: Fri Jan 16, 2004 12:04 am
Location: Bell-something, WA
Contact:

Re: Enduring Solutions ECU board and why you should buy it

Post by carfreak85 »

mike-tracy wrote:
Tue Oct 15, 2019 4:54 am
If I could do it again, I would get the plug and play "Link WRXLINK Ver 1/2." Its double the price at a minimum, but many/most tuners are at least somewhat familiar with it, and you can use additional input/outputs beyond those in the stock Subaru harnesses. I hear the tuning software is significantly more advanced.
I recently spoke to a coworker who came to us from GM doing powertrain calibrations. I sent him the specs of the Link ECU and he was impressed by it, said it should be a very powerful solution.
1975 Superstar Wagon
1984 GL-10 Turbo-Traction Wagon
1984 GL-10 Turbo-Traction Hardtop
1987 RX coupe
1987 RX Type RA
2002 WRX sedan

mike-tracy
Moderator
Moderator
Posts: 4972
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Enduring Solutions ECU board and why you should buy it

Post by mike-tracy »

My ESL is still working good for almost 5 years now. It's in a different car (still an SS) and radically different engine (mix and match of parts, an ej22k with ej20g intake and electronics, ej205 coil on plugs). Like my robtunes, this one has a cold start issue occasionally. I mean, it's not really an issue because you aren't going to drive off without letting your 28 year old sports car warm up first, right?

The reason for this post is I convinced my friend to buy an ESL for his ej20g swapped impreza. I told him he didn't need to buy the cable because it looked like a generic Subaru SSM to usb. Well I was mistaken. I have both a genuine ESL cable, and an ebay cable. The ESL software rejects the generic cable and won't tune or even view the ecu with it. I tried Revscan and Evoscan with both cables, and they work.

So there's something in the ESL software that *blocks you from using a generic cable!* I know it seems expensive, £315 + £95 for the ESL and cable. But if you don't buy the cable at the same time as the ESL, the price goes up to £195 for the cable separately.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote:
Mon Jan 14, 2002 10:23 am
Wait....I'm confused now.

carfreak85
First Gear
Posts: 158
Joined: Fri Jan 16, 2004 12:04 am
Location: Bell-something, WA
Contact:

Re: Enduring Solutions ECU board and why you should buy it

Post by carfreak85 »

Just spoke with my buddy who is a distributor/installer for the Link ECUs. They are moving from the Link G4+ to the G4-X, which has a much faster processor, more memory for data logging and can utilize CAN for wideband, etc.

I'll be going this route probably before the end of the year, once they roll out the hardware fully and the tuner gets a bit more familiar with the new features and connections. I'm not trying to be a guinea pig, but not many will be putting these on a EJ20G, so I may well be...
1975 Superstar Wagon
1984 GL-10 Turbo-Traction Wagon
1984 GL-10 Turbo-Traction Hardtop
1987 RX coupe
1987 RX Type RA
2002 WRX sedan

Legacy777
Site Admin
Site Admin
Posts: 27612
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Enduring Solutions ECU board and why you should buy it

Post by Legacy777 »

It would be nice if they had a trade up/in program and kept the ECU connectors the same. I'd be willing to pay a little for new features. I could probably depin the old ECU connector and put it in the new connector....

I'd be curious to see what the connectors are like on the new ECU.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm

Post Reply