Hey everybody! It's been awhile since I have been on here but I'm need of some advice and people here generally are very helpful so if I could get some help on whether or not this swap will work would be awsome.
I have a hybrid motor in my shed and it consists of a 1994 ej22T block with 1999 2.5rs Sohc heads and intake manifold with a merged ej22t harness.
So the question is! Would I be able to put that engine into my 97 legacy outback v.i.a removing the early model merged harness and replacing it with my outback one? I don't think the intake manifolds swap...
EJ22 Hybrid Swap *Need expert advice*
Moderators: Helpinators, Moderators
-
- Third Gear
- Posts: 851
- Joined: Mon May 12, 2008 4:19 am
-
- Second Gear
- Posts: 454
- Joined: Thu Nov 23, 2006 1:07 am
- Location: Maine
Re: EJ22 Hybrid Swap *Need expert advice*
the throttle body and iac motor is where you will run into issues. the sohc has a 6 wire iac, and the dohc has a 3 wire. you can use the phase 2 2.2 tb, it has a 3 wire iac.... However, with those heads your compression ratio is going to be high 6:1's to low 7:1's which is way too low.
get a set of dohc 25d heads if your stuck on a hybrid, they are cheap and flow just as well.
get a set of dohc 25d heads if your stuck on a hybrid, they are cheap and flow just as well.
94 Supra Turbo 6 speed. build in progress
98 Lexus GS300, single turbo 2JZGTE swap. daily driver
93 Impreza wagon, home brewed n/a-t ken block themed winter drift missle
*sold*
94 Alpine Sport Wagon... STi conversion, rotated turbo etc
98 Lexus GS300, single turbo 2JZGTE swap. daily driver
93 Impreza wagon, home brewed n/a-t ken block themed winter drift missle
*sold*
94 Alpine Sport Wagon... STi conversion, rotated turbo etc
-
- Third Gear
- Posts: 851
- Joined: Mon May 12, 2008 4:19 am
Re: EJ22 Hybrid Swap *Need expert advice*
Perfect! Its been a while since i have played around with the IAC`S but i i have Ej25dohc heads too, what headgasket should be used then? Just realized this thread is tottaly in the wroung spot, noob alert... haha
FastRust
-
- Second Gear
- Posts: 454
- Joined: Thu Nov 23, 2006 1:07 am
- Location: Maine
Re: EJ22 Hybrid Swap *Need expert advice*
use 22t headgaskets
94 Supra Turbo 6 speed. build in progress
98 Lexus GS300, single turbo 2JZGTE swap. daily driver
93 Impreza wagon, home brewed n/a-t ken block themed winter drift missle
*sold*
94 Alpine Sport Wagon... STi conversion, rotated turbo etc
98 Lexus GS300, single turbo 2JZGTE swap. daily driver
93 Impreza wagon, home brewed n/a-t ken block themed winter drift missle
*sold*
94 Alpine Sport Wagon... STi conversion, rotated turbo etc
-
- Third Gear
- Posts: 851
- Joined: Mon May 12, 2008 4:19 am
Re: EJ22 Hybrid Swap *Need expert advice*
awsome! also as a side note were all leggy SS closed deck? 90-94?
FastRust
Re: EJ22 Hybrid Swap *Need expert advice*
91-94 were closed deck only in the usdm market.
-
- Third Gear
- Posts: 851
- Joined: Mon May 12, 2008 4:19 am
Re: EJ22 Hybrid Swap *Need expert advice*
Just pulled the heads off the hybrid motor and the walls are silky smooth and the pistons have harsh valve train damage im not even going to bother. Parts are going up for sale.
FastRust
Re: EJ22 Hybrid Swap *Need expert advice*
Going to move this to the engine forum.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm