»  BC-BF Legacy Discussion »  Engine
#Purchasing oil piston squirters

Custom Search
Login | Register




Post new topic Reply to topic  [ 19 posts ] 
Author Message
 Post subject: Purchasing oil piston squirters
PostPosted: Thu Apr 28, 2016 10:57 pm 
Second Gear
Joined: Thu Oct 27, 2011 5:09 am
Posts: 426
Location: Dirt Roads, Colorado
Hey BBS,

So I did some searching and didn't find any discussion on here where to purchase oil piston squirters, sorry if it's already been covered.

So I've been doing a bit of digging around trying to find an answer. Looking through US parts catalogs I'm unable to find anything for the ej22t engine specifically, and calling the dealership has rendered nothing.

I began searching JDM and EDM parts catalogs and found a parts number for oil squirters/jets found in the very similar ej20g engine. I then started punching the parts # into to Google and was able to find a few places that are selling OEM new ej20g oil squirters/jets.

It's my best guess that ej20g squirters/jets are identical to ej22t and likely have the same pressure relief settings, but don't quote me on that because I haven't found any literature yet stating exactly what they are set for.

Oil squirter/jet parts #:
15036AA010

Oil squirter/jet washer(gasket) parts #: 803905020

Image


Some websites I've found selling the squirters/jets:


RHD japan - JDM land -I've purchased many parts from these guys and would consider them a very reputable seller.

ImportCarParts - out of the UK

Advanced automotives - a bit pricey, out of Europe

Partsouq.com - selling them for USD $1.15 ea! - online reviews were good, I just made a purchase and will update if its legit.

Image
Image

Hope this helps some people out! - Cheer's

_________________
93 impreza rally muffin
93 legacy ss Tarmac Terminator
89 Nissan 240sx sr20
90 Nissan 240sx 2jz
killajamal wrote:
Dank is actually German for "silly term which the kids have come up with to describe exceptionally choice marijuana.''


Last edited by dankberries on Tue May 03, 2016 4:10 am, edited 5 times in total.

Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Fri Apr 29, 2016 12:26 am 
Moderator
Moderator
Joined: Tue Aug 25, 2009 7:52 am
Posts: 4555
Location: Des Moines, Wa
Thanks for that. I just bought some from a member, new oem squirters. Maybe we can compare when you get yours in.

_________________
1992 Legacy SS 5mt, reasonably modified ;)


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Fri Apr 29, 2016 2:30 pm 
Fifth Gear
Joined: Fri Jun 20, 2008 8:17 am
Posts: 6228
Location: Lakewood, Wa 98439
This is very helpful information!

_________________
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Tue May 03, 2016 5:40 pm 
Second Gear
Joined: Thu Oct 27, 2011 5:09 am
Posts: 426
Location: Dirt Roads, Colorado
Ok, the oil jets arrived in the mail today from partsouq.com. Crazy out of Dubai, and wow, shipped out on May 1st and arrived today on May 3rd! They were a $1.15 a piece, $4.60 total, plus shipping came to a total of $15.39!

They look like the real deal:
Image
Image

Partsouq.com says they have over 100 in stock, for that price I think it's not a bad idea to go ahead and replace yours in your next engine build/rebuild.

_________________
93 impreza rally muffin
93 legacy ss Tarmac Terminator
89 Nissan 240sx sr20
90 Nissan 240sx 2jz
killajamal wrote:
Dank is actually German for "silly term which the kids have come up with to describe exceptionally choice marijuana.''


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Tue May 03, 2016 7:13 pm 
Moderator
Moderator
Joined: Tue Aug 25, 2009 7:52 am
Posts: 4555
Location: Des Moines, Wa
Damn, i better stock up!

_________________
1992 Legacy SS 5mt, reasonably modified ;)


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Wed May 04, 2016 6:37 pm 
Site Admin
Site Admin
Joined: Tue Oct 15, 2002 11:37 am
Posts: 27124
Location: Houston, Tx
This is great info!

Don't forget the washer either as the old washers can sometimes get squished/bent as they are soft aluminum.

_________________
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Fri May 06, 2016 4:20 am 
Second Gear
Joined: Sun Mar 04, 2007 4:59 am
Posts: 414
Location: Tazewell VA
Looks like they are showing 0 available washers on partsoug.com, any other confirmed source for them or aftermarket equivalent?

Sent from my 0PJA2 using Tapatalk


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Fri May 06, 2016 5:17 pm 
Second Gear
Joined: Thu Oct 27, 2011 5:09 am
Posts: 426
Location: Dirt Roads, Colorado
86BRATMAN wrote:
Looks like they are showing 0 available washers on partsoug.com, any other confirmed source for them or aftermarket equivalent?

Sent from my 0PJA2 using Tapatalk


You can try googling the parts # for the washer: 803905020.

Also RHDjapan and advanced atomotives offer a combo package of the oil jet and washer.

_________________
93 impreza rally muffin
93 legacy ss Tarmac Terminator
89 Nissan 240sx sr20
90 Nissan 240sx 2jz
killajamal wrote:
Dank is actually German for "silly term which the kids have come up with to describe exceptionally choice marijuana.''


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Tue May 10, 2016 6:53 pm 
Second Gear
Joined: Sun Mar 04, 2007 4:59 am
Posts: 414
Location: Tazewell VA
Spoke with an online Subaru parts dealer, after my purchase of 4 washers there are 21 left in the country.

Sent from my 0PJA2 using Tapatalk


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Tue May 10, 2016 10:21 pm 
Second Gear
Joined: Thu Oct 27, 2011 5:09 am
Posts: 426
Location: Dirt Roads, Colorado
86BRATMAN wrote:
Spoke with an online Subaru parts dealer, after my purchase of 4 washers there are 21 left in the country.

Sent from my 0PJA2 using Tapatalk


I imagine it should be possible to find an equivalent, I need to take some measurements and do some research. If you can perhaps take some measurements when you receive your new ones, and share, that would be awesome! Time has not been on my side working 7days a week, I'm unsure when I can get to it.

_________________
93 impreza rally muffin
93 legacy ss Tarmac Terminator
89 Nissan 240sx sr20
90 Nissan 240sx 2jz
killajamal wrote:
Dank is actually German for "silly term which the kids have come up with to describe exceptionally choice marijuana.''


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Tue May 10, 2016 10:54 pm 
Fourth Gear
Joined: Wed Sep 19, 2012 3:58 am
Posts: 1030
Location: Plaistow,NH
If I'm given measurements, I can make them

_________________
Blue 94GT dead and steadily parting out.
Silver 93 Fwd N/A sedan undergoing repairs
93 Winestone TW project
92 SS scrapped by my landlord...


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Wed May 11, 2016 2:38 am 
Second Gear
Joined: Sun Mar 04, 2007 4:59 am
Posts: 414
Location: Tazewell VA
I should have them in a week or so they said it could take up to 5 days to get them from Subaru as it's not a part they keep in stock (no surprise). I'll update with measurements when I get them.

Sent from my 0PJA2 using Tapatalk


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Tue Jun 21, 2016 5:56 pm 
Site Admin
Site Admin
Joined: Tue Oct 15, 2002 11:37 am
Posts: 27124
Location: Houston, Tx
Any update on measurements?

_________________
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Tue Jun 21, 2016 10:12 pm 
Third Gear
Joined: Wed Aug 22, 2007 9:27 pm
Posts: 787
Location: Denver, CO
I need some washers as well. I am capping off the squirters, but want to use proper washers under a shouldered bolt.

I am going to measure the old ones and see if I can find a copper or aluminum washer of same size....maybe on McMaster-Carr

_________________
maciek puszynski

01 Impreza | v6 STi RA | 5mt | ej236t
93 Legacy Turbo | TW | 4eat | ej22t
16 WRX | 6mt | fa20
98 Legacy GT | wagon | 5mt | ej25d


2.36L Turbo - RSTi Build


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Tue Jun 21, 2016 11:03 pm 
Second Gear
Joined: Sun Mar 04, 2007 4:59 am
Posts: 414
Location: Tazewell VA
I'm glad this popped back up. I have the washers but completely forgot to measure them. I'm making a reminder on my phone to measure them Thursday evening when I'm not working.

Sent from my 0PJA2 using Tapatalk


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Wed Jun 22, 2016 3:17 pm 
Fifth Gear
Joined: Fri Jun 20, 2008 8:17 am
Posts: 6228
Location: Lakewood, Wa 98439
I bought 4 this morning to have since the last link only had 8 available.

_________________
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Tue Mar 28, 2017 10:37 pm 
Second Gear
Joined: Thu Oct 27, 2011 5:09 am
Posts: 426
Location: Dirt Roads, Colorado
Did anybody ever get measurements on the washers?

_________________
93 impreza rally muffin
93 legacy ss Tarmac Terminator
89 Nissan 240sx sr20
90 Nissan 240sx 2jz
killajamal wrote:
Dank is actually German for "silly term which the kids have come up with to describe exceptionally choice marijuana.''


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Wed Jul 19, 2017 5:06 am 
First Gear
Joined: Mon Feb 20, 2012 5:44 pm
Posts: 191
Location: Salt Lake City, UT
Just in case this helps anyone in the future.

Oil jet/squirter washer measurements: .405" OD, .208" ID, .039" thick. Or 10.3mm OD, 5.3mm ID, 1mm thick.

I ordered washers from McMaster Carr, part no. 93286A011. About $10.00 for 100 washers iirc. Over 11k on my build so far.

_________________
93 SS - Wife's DD, Walbro 255, Boost gauge, POWER mode!, RobTune on the way!!!
03 WRX 22T/205 20GXT 350 whp
95 BK - Sold to my neighbor.


Profile  Offline
Reply with quote  
 Post subject: Re: Purchasing oil piston squirters
PostPosted: Wed Jul 19, 2017 7:43 pm 
Second Gear
Joined: Thu Oct 27, 2011 5:09 am
Posts: 426
Location: Dirt Roads, Colorado
Thanks for submitting the information about the washers!

_________________
93 impreza rally muffin
93 legacy ss Tarmac Terminator
89 Nissan 240sx sr20
90 Nissan 240sx 2jz
killajamal wrote:
Dank is actually German for "silly term which the kids have come up with to describe exceptionally choice marijuana.''


Profile  Offline
Reply with quote  

Display posts from previous:  Sort by  

Post new topic Reply to topic  [ 19 posts ] 


Who is online

Users browsing this forum: bmxpunk and 2 guests

Panel

Top You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
Search for:
Jump to:  

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Dizayn Ercan Koc