EJ25D Crank pulley...anything magic about it?
Moderators: Helpinators, Moderators
-
- First Gear
- Posts: 194
- Joined: Fri Mar 25, 2016 2:48 pm
- Location: Beautiful Downtown Goode, VA
- Contact:
EJ25D Crank pulley...anything magic about it?
Ok the back story is I am FINALLY getting my new engine tomorrow!!! Builder lost the crank pulley so I will have to provide one. Is it truly a harmonic balancer like some of the chevy engines use or is it just a pulley. Best source for aftermarket lightweight pulley? Many thanks in advance for help provided.
Re: EJ25D Crank pulley...anything magic about it?
It's basically a pulley with a zero balance, any 2.2 or 2.5 pulley will work. I went on eBay and bought a lightweight one for mine like this one
http://m.ebay.com/itm/VMS-Racing-Light- ... ING_ACTIVE
This is what is going on my 200 chp n/a 2.5.
http://m.ebay.com/itm/VMS-Racing-Light- ... ING_ACTIVE
This is what is going on my 200 chp n/a 2.5.
Charles
90' White/Gray Outback DD workhorse (670,xxx) miles
92' Onyx Metallic (430,xxx) Wife's DD
68' Barracuda formula S 340 4spd coupe (ongoing project)
66' Mustang 2+2 4spd wife's (ongoing project)
90' White/Gray Outback DD workhorse (670,xxx) miles
92' Onyx Metallic (430,xxx) Wife's DD
68' Barracuda formula S 340 4spd coupe (ongoing project)
66' Mustang 2+2 4spd wife's (ongoing project)
Re: EJ25D Crank pulley...anything magic about it?
The stock pulley does have a rubber damper between the inner and outer part of the pulley. However the lightweight pullies don't really affect anything until you start getting up in horsepower.
But like Charles mentioned any 2.2 or 2.5 stock pulley will work, if you want to stick with the stock pulley.
But like Charles mentioned any 2.2 or 2.5 stock pulley will work, if you want to stick with the stock pulley.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm