ej255 into a 93 legacy ss

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
trippywhitekid
In Neutral
Posts: 25
Joined: Wed Aug 03, 2016 12:28 am
Location: mahwah, nj

ej255 into a 93 legacy ss

Post by trippywhitekid »

When i got the engine into the engine bay the ej255 mounts arent close to the sub frame slot to bolt the engine mounts to the sub frame. was wondering if anyone had any info on what mounts or what i should do to get the engine to work
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: ej255 into a 93 legacy ss

Post by mike-tracy »

If they don't fit, you have them reversed left to right.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
trippywhitekid
In Neutral
Posts: 25
Joined: Wed Aug 03, 2016 12:28 am
Location: mahwah, nj

Re: ej255 into a 93 legacy ss

Post by trippywhitekid »

ok ill give that a shot and i shouldve specified im using the ej255 engine mounts from a 04 forester xt
jamal
Vendor
Vendor
Posts: 2485
Joined: Thu Dec 11, 2003 11:34 am
Location: Missoula
Contact:

Re: ej255 into a 93 legacy ss

Post by jamal »

It should go in fine. Engine mounts varied slightly over the years but the mounts on the engine, mounts in the subframe, and where they are supposed to be relative to eachother is the same for everything. So I guess you could have the mount backward on the plate.
peter@functionauto.com
Post Reply