ECU advise: apexi on 22t?

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
Martin_Subaru
In Neutral
Posts: 17
Joined: Sat Dec 09, 2017 11:15 pm

ECU advise: apexi on 22t?

Post by Martin_Subaru » Fri Dec 07, 2018 8:51 pm

Hi
I need some advice on my project. I am building an EJ22T with forged internals EJ25D heads, 550cc injectors and a td05-16g.
I have a 4 plug Apexi fc power commander ecu for en EJ20G will it be able to work on my EJ22 i am maninly thinking about ignition now that the 22T uses coil pack and the 20G uses coil on plugs.

Thanks in advance.

mike-tracy
Moderator
Moderator
Posts: 4873
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: ECU advise: apexi on 22t?

Post by mike-tracy » Fri Dec 07, 2018 9:10 pm

You can either use an ignition converter that robtune sells, or convert to coil on plug. Both are feasible ways to run that ecu, but converting to coil on will probably be a better option if you plan to crank the boost. There's a write-up by kimokalihi on how to do that.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote:
Mon Jan 14, 2002 10:23 am
Wait....I'm confused now.

Martin_Subaru
In Neutral
Posts: 17
Joined: Sat Dec 09, 2017 11:15 pm

Re: ECU advise: apexi on 22t?

Post by Martin_Subaru » Fri Dec 07, 2018 10:49 pm

Thanks Mike tracy i will look it up :)

Post Reply