Pretty insane drop with these BC’s for a 93-01 Impreza. The back is rubbing on the fender lining so I’m going to need to raise the ride height there, but the fitment is pretty good from the box.
The stock Subaru offsets are typically in the +50 mm range. I'd be curious if you would still have rubbing issues with more positive offset to suck the wheel into the fender.
Legacy777 wrote:The stock Subaru offsets are typically in the +50 mm range. I'd be curious if you would still have rubbing issues with more positive offset to suck the wheel into the fender.
Does it rub a lot or a little?
The rears are where it’s rubbing the most but sadly there’s no camber plates on the rear. I’m thinking of just rolling the fenders first to see if it helps, if not I’ll raise it up a bit.