wrx pedal box= 1991 legacy pedal box????

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
rallyboy_96
In Neutral
Posts: 17
Joined: Tue Jun 19, 2007 7:50 pm
Location: st-hubert, quebec, canada

wrx pedal box= 1991 legacy pedal box????

Post by rallyboy_96 »

i want to know if i can put a pedal box from another subaru to my 1991 legacy ???
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

Post by 555BCTurbo »

It should work providing it is:

A) of the same clutch release type (unless you are converting)

B) cable throttle (unless you are converting to throttle by wire-in which case I wish you good luck)
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
rallyboy_96
In Neutral
Posts: 17
Joined: Tue Jun 19, 2007 7:50 pm
Location: st-hubert, quebec, canada

Post by rallyboy_96 »

thank u
i'll check this out
IronMonkeyL255
Fourth Gear
Posts: 1902
Joined: Sat Aug 09, 2003 5:02 pm
Location: Woodruff, SC

Post by IronMonkeyL255 »

555BCTurbo wrote:It should work providing it is:

A) of the same clutch release type (unless you are converting)

B) cable throttle (unless you are converting to throttle by wire-in which case I wish you good luck)
Would the throttle type even matter? The throttle pedal is on its own assembly separate from the clutch/brake assembly in cable-operated applications. Did they integrate the units for throttle-by-wire cars?
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.

That being said, everything I post is accurate to the best of my knowledge.

Rio Red '91 Legacy SS
93forestpearl
Fifth Gear
Posts: 3043
Joined: Tue Jan 25, 2005 9:14 pm
Location: Twin Cities, MN

Post by 93forestpearl »

IronMonkeyL255 wrote:
555BCTurbo wrote:It should work providing it is:

A) of the same clutch release type (unless you are converting)

B) cable throttle (unless you are converting to throttle by wire-in which case I wish you good luck)
The throttle pedal is on its own assembly separate from the clutch/brake assembly in cable-operated applications.
Same thing with hydro setups. I swapped to a SS hydro without toutching the throttle.
→Dan

piddster34 at h0tma1l d0t c0m
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

Post by 555BCTurbo »

That's a damn good point...

I don't know why on earth I thought that the throttle pedal was part of the cluster...especially because I did a 4eat > 5mt swap a few months ago...


:smt021
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
Psychoreo
Second Gear
Posts: 360
Joined: Tue Jan 18, 2005 11:07 pm
Location: Enfield, CT

Post by Psychoreo »

A couple of the bolts from a WRX pedal box won't match up but it's no big deal. Yo should be good to go providing you follow 555BCTurbo's other advice.
stupid electrical work...
Post Reply