wrx pedal box= 1991 legacy pedal box????
Moderators: Helpinators, Moderators
-
- In Neutral
- Posts: 17
- Joined: Tue Jun 19, 2007 7:50 pm
- Location: st-hubert, quebec, canada
wrx pedal box= 1991 legacy pedal box????
i want to know if i can put a pedal box from another subaru to my 1991 legacy ???
-
- Knowledgeable
- Posts: 3335
- Joined: Wed Feb 16, 2005 9:40 pm
- Location: Oregon
It should work providing it is:
A) of the same clutch release type (unless you are converting)
B) cable throttle (unless you are converting to throttle by wire-in which case I wish you good luck)
A) of the same clutch release type (unless you are converting)
B) cable throttle (unless you are converting to throttle by wire-in which case I wish you good luck)
Nick
1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
-
- In Neutral
- Posts: 17
- Joined: Tue Jun 19, 2007 7:50 pm
- Location: st-hubert, quebec, canada
-
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
Would the throttle type even matter? The throttle pedal is on its own assembly separate from the clutch/brake assembly in cable-operated applications. Did they integrate the units for throttle-by-wire cars?555BCTurbo wrote:It should work providing it is:
A) of the same clutch release type (unless you are converting)
B) cable throttle (unless you are converting to throttle by wire-in which case I wish you good luck)
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
- Fifth Gear
- Posts: 3043
- Joined: Tue Jan 25, 2005 9:14 pm
- Location: Twin Cities, MN
Same thing with hydro setups. I swapped to a SS hydro without toutching the throttle.IronMonkeyL255 wrote:The throttle pedal is on its own assembly separate from the clutch/brake assembly in cable-operated applications.555BCTurbo wrote:It should work providing it is:
A) of the same clutch release type (unless you are converting)
B) cable throttle (unless you are converting to throttle by wire-in which case I wish you good luck)
→Dan
piddster34 at h0tma1l d0t c0m
piddster34 at h0tma1l d0t c0m
-
- Knowledgeable
- Posts: 3335
- Joined: Wed Feb 16, 2005 9:40 pm
- Location: Oregon
That's a damn good point...
I don't know why on earth I thought that the throttle pedal was part of the cluster...especially because I did a 4eat > 5mt swap a few months ago...
I don't know why on earth I thought that the throttle pedal was part of the cluster...especially because I did a 4eat > 5mt swap a few months ago...
Nick
1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust