transmission help needed asap

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
keithmoilanen
Second Gear
Posts: 250
Joined: Sat Aug 13, 2011 7:30 pm
Location: Vancouver, Wa

transmission help needed asap

Post by keithmoilanen » Wed Aug 14, 2013 11:04 pm

My transMission Decided to eat my dipstick. Might have to rebuild. Wrx tranny in my 91 well should be lol. Any body help? In vancouver. Can some one take a look ?
2018 WRX
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon

Legacy777
Site Admin
Site Admin
Posts: 27514
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: transmission help needed asap

Post by Legacy777 » Fri Aug 16, 2013 1:27 am

Did your dipstick top come off?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

keithmoilanen
Second Gear
Posts: 250
Joined: Sat Aug 13, 2011 7:30 pm
Location: Vancouver, Wa

Re: transmission help needed asap

Post by keithmoilanen » Sat Aug 24, 2013 7:46 am

Chew up some gears neeed to rebuild swapped the tranny already.
2018 WRX
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon

keithmoilanen
Second Gear
Posts: 250
Joined: Sat Aug 13, 2011 7:30 pm
Location: Vancouver, Wa

Re: transmission help needed asap

Post by keithmoilanen » Thu Oct 29, 2015 12:48 am

Update, broke second gear drive and driven are missing teeth. Got the shafts out but need to press off the gears. Anyone done this before near Vancouver. Don't want to mess it up. And I dont have a press.
2018 WRX
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon

TurnNburn
Second Gear
Posts: 353
Joined: Fri Jul 09, 2010 1:41 am
Location: Bend, Oregon

Re: transmission help needed asap

Post by TurnNburn » Thu Oct 29, 2015 7:50 pm

im sure there are some machine shops around you that would press a few gears for pretty cheap. It cost me $20 a gear to do mine before I had a press. a bit steep in my opinion but I didn't have any other choice.
1990 NA 2.2 Open Light rally car

keithmoilanen
Second Gear
Posts: 250
Joined: Sat Aug 13, 2011 7:30 pm
Location: Vancouver, Wa

Re: transmission help needed asap

Post by keithmoilanen » Mon Jul 23, 2018 1:05 am

Finally had time to try and get this car running again but now the transmission won't shift with the engine on. Fork and throw out bearing seem to be moving but clutch is not releasing allowing for a shift into gear. It shifts fine without engine on.
2018 WRX
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon

keithmoilanen
Second Gear
Posts: 250
Joined: Sat Aug 13, 2011 7:30 pm
Location: Vancouver, Wa

Re: transmission help needed asap

Post by keithmoilanen » Thu Jul 26, 2018 10:43 pm

Transmission finally is working! Now I am having engine issues, I am unable to press throttle down to where I get over a couple lbs of boost and the engine begans to die. Any ideas? I went over vacuum lines and they seem fine.
2018 WRX
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon

Legacy777
Site Admin
Site Admin
Posts: 27514
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: transmission help needed asap

Post by Legacy777 » Fri Jul 27, 2018 6:36 pm

Any codes in the ECU if you do the active diagnostic with the green diagnostic connectors?

It also may be helpful if you start a new thread in the electrical forum.

Thanks
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

keithmoilanen
Second Gear
Posts: 250
Joined: Sat Aug 13, 2011 7:30 pm
Location: Vancouver, Wa

Re: transmission help needed asap

Post by keithmoilanen » Mon Jul 30, 2018 9:12 pm

Codes are really hard for me to read. But I tidy up the hose lines and no she is getting all the boost/power as before!
2018 WRX
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon

Post Reply