driveshalf shaking

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
93FrostWhite
In Neutral
Posts: 48
Joined: Wed Sep 24, 2014 9:53 pm

driveshalf shaking

Post by 93FrostWhite »

so when i turn in any direction and go like 3+mph the you can feel the driveshalf shaking. also if i turn the wheel at full lock it feels like the car is hard to move like its strainging. any i deas what this could be its a 93 legacy with a rebuild forester trans with a 3.90 center and rear diff
robertpaige
Fourth Gear
Posts: 1232
Joined: Tue Jul 31, 2012 10:32 pm
Location: Portland, Oregon.

Re: driveshalf shaking

Post by robertpaige »

check the 4 bolts that connect the driveline to the rear diff. Mine were loose at one point. Lost 1 even.
the guy who had the really low winestone SS on the corvette wheels
93FrostWhite
In Neutral
Posts: 48
Joined: Wed Sep 24, 2014 9:53 pm

Re: driveshalf shaking

Post by 93FrostWhite »

I just went threw all 4 today and tighted them down and still nothing
lucas
Third Gear
Posts: 736
Joined: Tue Nov 27, 2007 2:43 am
Location: tacoma washington

Re: driveshalf shaking

Post by lucas »

check the carrier bearing, its the part of the drive shaft that splits and bolts to the body.
1993 legacy ss "Shela"
93FrostWhite
In Neutral
Posts: 48
Joined: Wed Sep 24, 2014 9:53 pm

Re: driveshalf shaking

Post by 93FrostWhite »

it looks beat what year drive shaft can i use?
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: driveshalf shaking

Post by Legacy777 »

Any 90-94 AT driveshaft will bolt in.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply