No power light

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
AlaskanLegacy
In Neutral
Posts: 18
Joined: Tue Feb 20, 2018 7:01 pm

No power light

Post by AlaskanLegacy »

So this has been bothering me a while so I thought I’d ask you guys what you thought. My power light used to work as it should, coming on when you get onto the gas. My car sat for a while and now that it’s back on the road, the light isn’t working. It comes on when I turn the car on, goes off. When I start the car it gets the 16 blinks because of a vehicle speed sensor, but I cannot get it to come on by getting on the gas. Any ideas?
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: No power light

Post by Legacy777 »

When you checked the codes in the TCU, what code(s) came up? Did you try both the stored and active checks?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply