Member's Car Thread

Show us your Legacy pictures and videos.

Moderator: Moderators

SILINC3R
quasi-mod-o
quasi-mod-o
Posts: 2763
Joined: Wed May 30, 2007 6:11 am
Location: Charlotte, NC

Re: Member's Car Thread

Post by SILINC3R » Tue Oct 02, 2012 5:28 pm

diesel devil, just noticed on the RS-RA on the corner blinkers there is a part that sticks out. Is this another blinker? My roommate actually pointed this out on my car in Forza Motorsport and I had no idea cause I had never seen it on anyother car until just now in this photo lol.
Tony
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
92ss satinsvoice wrote:LOL! that block was like F*** THIS! IM OUT!
mike-tracy wrote:Word. I'd love to get my hands on one of those trannies, but I just can't stomach the cost

94subleg
In Neutral
Posts: 2
Joined: Tue Oct 09, 2012 1:32 am
Location: New Brunswick

Re: Member's Car Thread

Post by 94subleg » Tue Oct 09, 2012 2:15 am

wow, nice rides, mine's stock, though parts are going in... ( to keep it going)

hallie
In Neutral
Posts: 32
Joined: Tue Mar 27, 2012 7:15 pm
Location: Southampton, UK
Contact:

Re: Member's Car Thread

Post by hallie » Sun Oct 14, 2012 12:28 pm

cj91legss wrote:
Legacy777 wrote:CJ,

Was that a twin turbo motor?
Yes Sir, EJ20R. Bought it from Jake for 400. Only thing about it that sucks is the off boost power is crap but when it hits boost, It's a fun ride :)
Either the heads or the maybe just the cam covers are from a EJ20H

sqc151
quasi-mod-o
quasi-mod-o
Posts: 1198
Joined: Wed Aug 29, 2007 2:14 am
Location: NY, NJ

Re: Member's Car Thread

Post by sqc151 » Sun Oct 14, 2012 7:29 pm

Image

cj91legss
Fifth Gear
Posts: 6308
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: Member's Car Thread

Post by cj91legss » Sun Oct 14, 2012 7:37 pm

hallie wrote:
cj91legss wrote:
Legacy777 wrote:CJ,

Was that a twin turbo motor?
Yes Sir, EJ20R. Bought it from Jake for 400. Only thing about it that sucks is the off boost power is crap but when it hits boost, It's a fun ride :)
Either the heads or the maybe just the cam covers are from a EJ20H
Maybe the whole engine was 20H I Cant remember, but it was a COP engine and had a ton of vacuum lines on the top. Think Jake said it was a 1996 motor
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT

mike-tracy
Moderator
Moderator
Posts: 4945
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Member's Car Thread

Post by mike-tracy » Mon Oct 15, 2012 11:47 pm

^^Smooth valvecovers=ej20r, the ones that say 16valve are ej20h. HLA, right?
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote:
Mon Jan 14, 2002 10:23 am
Wait....I'm confused now.

cj91legss
Fifth Gear
Posts: 6308
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: Member's Car Thread

Post by cj91legss » Mon Oct 15, 2012 11:52 pm

oooooohhhhhh yeah, i think youre right Mike
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT

mike-tracy
Moderator
Moderator
Posts: 4945
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Member's Car Thread

Post by mike-tracy » Tue Oct 16, 2012 12:02 am

Nothing wrong with em, those are sweet heads with good cams for all around power - similar to ej20g. Not all topend like the 20R or 20k. Once you get your car tuned you'll see. Quick response like mine but sooner boost and much better topend :)
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote:
Mon Jan 14, 2002 10:23 am
Wait....I'm confused now.

cj91legss
Fifth Gear
Posts: 6308
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: Member's Car Thread

Post by cj91legss » Tue Oct 16, 2012 1:22 am

Yeah but the compression is super low, so there's no off boost power. im thinking about a 2.5 crank and rods to help compensate for that tho. should bring my compression back up enough and then i'll also be 2.35l
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT

vic subi
In Neutral
Posts: 6
Joined: Fri Nov 16, 2012 11:25 pm

Re: Member's Car Thread

Post by vic subi » Sat Nov 17, 2012 3:23 am

my winter ride picked her up for $700 with a stack of receipts of around $6000 including replaced engine.
Image

Legacy777
Site Admin
Site Admin
Posts: 27549
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Member's Car Thread

Post by Legacy777 » Sat Nov 17, 2012 5:20 am

Looking good!
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

fireman2101
First Gear
Posts: 50
Joined: Tue Oct 02, 2012 5:03 pm
Location: Lititz, PA

Member's Car Thread

Post by fireman2101 » Wed Nov 28, 2012 12:00 am

My 91 I picked up for $1300 and still under $700 put into it including exhaust, td05-16, and robtune(with supporting mods) plus general maintenance done. Image
Semper Fi

1991 Legacy Turbo
2006 OBS- retired

DougFresh
First Gear
Posts: 58
Joined: Mon Dec 03, 2012 8:37 pm
Location: Montana

Re: Member's Car Thread

Post by DougFresh » Fri Dec 07, 2012 4:35 pm

My Beater; I am from Montana. :)
Image

sqc151
quasi-mod-o
quasi-mod-o
Posts: 1198
Joined: Wed Aug 29, 2007 2:14 am
Location: NY, NJ

Re: Member's Car Thread

Post by sqc151 » Sat Dec 08, 2012 1:35 am

nice^^^ what you dropped on and whats the wheel specs?

DougFresh
First Gear
Posts: 58
Joined: Mon Dec 03, 2012 8:37 pm
Location: Montana

Re: Member's Car Thread

Post by DougFresh » Mon Dec 10, 2012 6:40 am

93-01 impreza KYB struts; Tanabe DF210 springs. I wish i would have gone with Tanabe GF210's but i have a coilover kit to finish piecing together. until then the saggy butt will have to do.

the wheels.. i think they are 17x7.5; brand is unknown.. got them for a good price from a friend.
Last edited by DougFresh on Mon Dec 10, 2012 7:27 am, edited 1 time in total.

Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Re: Member's Car Thread

Post by Mattheww044 » Mon Dec 10, 2012 7:01 am

glad to see you post douggie! I'm not on much lately since I have a 2nd gen now, but this place is the shit! haha

cj91legss
Fifth Gear
Posts: 6308
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: Member's Car Thread

Post by cj91legss » Mon Dec 10, 2012 7:38 am

Wow Matt..... Nice to see you remembered us :-P

Sent from my SGH-T989 using Tapatalk 2
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT

DougFresh
First Gear
Posts: 58
Joined: Mon Dec 03, 2012 8:37 pm
Location: Montana

Re: Member's Car Thread

Post by DougFresh » Mon Dec 10, 2012 5:01 pm

Hola Matt!

yeah i decided to bite the bullet and join up.. finally.. after oh about 4 years of knowing about this site lol. back from when i had a black leggy and was using that as a DD until my RS swap was done. Ugh wish i would have never sold that leggy! oh well!

now i got another and never want to let it go! haha.

Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Re: Member's Car Thread

Post by Mattheww044 » Mon Dec 10, 2012 9:05 pm

yea I regret selling my SS everyday lol. I love my new car but that boost is just so irresistible haha.
Of course I remember you guys CJ! lol I'm not sure if I want to wait awhile and buy a wrecked STi, a JDM clip, or just get a 22t and build it up. No matter what I do I want a 6MT for sure... learned my lesson with the 5MTs haha they don't like power

DougFresh
First Gear
Posts: 58
Joined: Mon Dec 03, 2012 8:37 pm
Location: Montana

Re: Member's Car Thread

Post by DougFresh » Thu Dec 13, 2012 4:09 pm

I shattered 1st gear in my old RS trans. which has been debated to be stronger then the WRX Transmissions. 5Speeds dont like to be abused.. lol

$600 mistake.. lol it also doesnt help i had a stiffer clutch and pressure plate as well..

Fearnoevo
In Neutral
Posts: 24
Joined: Wed Apr 25, 2012 8:21 pm

Re: Member's Car Thread

Post by Fearnoevo » Tue Dec 25, 2012 1:17 am

my 1992 ss

Image
1996 outback sport $6000 worth of mods:Sold.
1992 legacy ss: MBC.. waiting for more.

CFK
Second Gear
Posts: 367
Joined: Mon Oct 25, 2010 6:28 pm
Location: Vancouver, B.C. Canada.

Re: Member's Car Thread

Post by CFK » Wed Jan 02, 2013 5:53 pm

Finally Got him in the Booth after much trouble and frustration :!:

Image
Image
Image
Image
Image

Painted it on Dec 1st and now can finally get back at it after all this holiday Shenanigans :!:

Only problem is it has to be wet-sanded and re-cleared :(

Build Thread :

http://bbs.legacycentral.org/viewtopic.php?f=25&t=46205
Build Thread : HERE
92 SS 5MT. Project Daily
84 Jetta Coupe. Real Project
99 A4 Avant. Wife's Daily

CAV3MAN227
Third Gear
Posts: 897
Joined: Fri Dec 25, 2009 8:21 am
Location: Arvada, CO
Contact:

Re: Member's Car Thread

Post by CAV3MAN227 » Sat Jan 05, 2013 11:28 pm

-How do you like those tires? I have the same kind. Noticed I cant take corners like I use too lol.

-Joe
-I'd rather loose by a mile because I built my own car, than win by an inch cause someone else built it for me. Your car, is your story, so don't let someone else write the book. ~Moog

Nibbib
First Gear
Posts: 179
Joined: Mon Dec 24, 2012 8:37 pm

Re: Member's Car Thread

Post by Nibbib » Tue Feb 05, 2013 1:32 am

Image

Image

i picked up this wagon last night and completely love it and the white rims are going to be its summer rims

Legacy777
Site Admin
Site Admin
Posts: 27549
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Member's Car Thread

Post by Legacy777 » Tue Feb 05, 2013 2:56 am

Looks good I like that wagon!
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm

Post Reply