ShoW Me YouR FoGLighTS !

[N1446]

Subaru decided fog-blinkers were in order , I disagree
what u goT : ?

[oskar_subaru]

[Scandinavianflick]

A very old pic... The fogs are gone for now.

[SubaruNation]

[N1446]

clear lexan covers and h1 halogens in the OEM housing.

[Danny-G]

Home made light bar for the fog lights and the driving lights are mounted to the bumper beam in the grille area.

[magicmike]

Version 1:


Version 2

[Subiel94]

i like mine. sorry about the bad quality

[MikeyMeyagi]

acura integra headlight projectors

[ericem]

I love your car ^^ the acura headlights are a awesome idea for fogs. Any pics of mounting?

I hope you will show us how to put acura headlights in stock headlight housings

[MikeyMeyagi]

its quite simple really, i welded a L shaped peice of steel to the back of the bumper beam, and used a worm hose clamp to secure the projector to the horizontal part of the bracket.

as far as putting them in headlights, they are only single beam projectors, bi xenon would be better, like a set of morimoto mini projectors, that mount thru the hole for the existing halogen bulb.

Thanks for the compliments on my car also.

[ericem]

Awesome sounds pretty simple I assume they are very effective? I am thinking of wiring the fogs to a relay so when the corners are on low beam the fogs turn on.

[MikeyMeyagi]

mine come on with my parking lights

[race_to_live]

Here are some pics of the light bar I built.

[beatersubi]

I really like your lightbar, race_to_live. Got any more pic of how it mounts to the beam?

[magicmike]

its quite simple really, i welded a L shaped peice of steel to the back of the bumper beam, and used a worm hose clamp to secure the projector to the horizontal part of the bracket.

as far as putting them in headlights, they are only single beam projectors, bi xenon would be better, like a set of morimoto mini projectors, that mount thru the hole for the existing halogen bulb.

Thanks for the compliments on my car also.

Hi Mike,

Can you tell me what you looked for specifically on ebay for these? And could you take some photos of the install for me? Are these HID or just halogen projector headlights? Ad how much did you snag them for if you dont mind me asking.

I'd like to do something similar

[evolutionmovement]

Do you have any pics of the Acura headlights before instal, also?

[MikeyMeyagi]

they are stock headlights from a 95 acura integra. i got the lights for free from a junk car i parted out. I cant really take pics since you cant see anything with the bumper cover installed. its very simple tho.

[beanis05]

That light bar is sexy

[ravencroft89]

http://www.mysubie.com/profile?id=1788# should show u one i did home built and thats after hittin a deer at 60 didnt have the lights on yet

[Danny-G]

Bringing it back with lightbar versions 1.5 and 2.
Ver. 1.5

Ver. 2



Version 3 is already in the planning stages and it will have a skid plate along with room for moar lights.

[oskar_subaru]

ewww

but functional

[criticalm@ss]

yuck

[Yamagata]

Version 1:


Version 2

I know this thread is old, but I like the way this is set up.

How did you mount these lights, next to the license plate??

I've pulled off my plastic bumper skin, and found a metal box bumper. So how did you bolt these on?

Thanks, looks sharp.

[Legacy777]

I had some driving lights that I mounted under the bumper and while they weren't as big I just used sheet metal screws and pre-drilled the holes.




Those are very old pictures....I've since removed the driving lights.