New SS: 1993 Legacy Turbo

Show us your Legacy pictures and videos.

Moderator: Moderators

Post Reply
logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

New SS: 1993 Legacy Turbo

Post by logan9691 » Thu Mar 04, 2010 11:28 pm

Image
Image
Image
Image
Image
Image

Mod list:

Engine:
Ej22T
resealed engine
VF43 turbo
WRX TMIC (soon to be FMIC)
Apexi power intake
custom PCV lines
Turbosmart BC (eventually will get Revtronix Stage 2 w/ 440's)
3" DP
Borla Exhaust
Full Catless

Drivetrain:
Ver. 4 JDM STi RA 5- speed
SPT short shifter
Exedy OEM clutch
Exedy LW flywheel
4.44 rear LSD from PREracing
WRX rear axels
Royal Purple 75- 90 gear lube for trans. and diff.
JDM 4pot front breaks with drilled and slotted rotors

This is a rear wheel bias transmission so it drives more like a rear wheel car now. It has the potential for a DCCD controller but haven't gotten it yet. its a 65- 35 split right now.

Other bits and pieces:

STi front and rear seats
Autometer boost gauge (20 PSI)
coilover suspension
'05 legacy 17" wheels
BFG high pro tires

Soon to have:
JDM head lights
FMIC
Synchronic BOV
full 3" exhaust
STI front strut tower bar (got it just doesn't fit over TMIC)
H- Brace underneath
GT Spec fender braces
white line sway bars
rear strut tower bar
and some more stuff I'm sure.
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

Florin1
Fourth Gear
Posts: 1173
Joined: Thu Dec 24, 2009 1:24 am
Location: Lynnwood, Wa.

Re: New SS: 1993 Legacy Turbo

Post by Florin1 » Fri Mar 05, 2010 12:18 am

Lets trade cars. Ok. Sounds good. I'm down the street. I want your interior btw. How do u sit? I put 06 wrx seats in mine, and i'm in the sunroof now. Grrr. But the seats are so much nicer than stock. Dammit.
1994 Legacy Sport Sedan.
1991 Legacy Sport Sedan.

logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Re: New SS: 1993 Legacy Turbo

Post by logan9691 » Fri Mar 05, 2010 12:23 am

haha
I sit high but for whatever reason it's alot better then when they were in my '91 ss. I don't hit the ceiling nearly as much, and it was pretty bad with coilovers.
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

Florin1
Fourth Gear
Posts: 1173
Joined: Thu Dec 24, 2009 1:24 am
Location: Lynnwood, Wa.

Re: New SS: 1993 Legacy Turbo

Post by Florin1 » Fri Mar 05, 2010 12:44 am

man i wanna see ur car in person. We have twins almost. You ever come down south?
1994 Legacy Sport Sedan.
1991 Legacy Sport Sedan.

logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Re: New SS: 1993 Legacy Turbo

Post by logan9691 » Fri Mar 05, 2010 1:02 am

not to often, but i'm trying to get my brother to go on a road trip with me sometime soon so we might head down that way.
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

drewriviera
First Gear
Posts: 196
Joined: Wed Jun 20, 2007 9:38 pm
Location: Asheville, NC

Re: New SS: 1993 Legacy Turbo

Post by drewriviera » Fri Mar 05, 2010 6:20 am

Nice!!! Super Clean...just how I like them!!

logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Re: New SS: 1993 Legacy Turbo

Post by logan9691 » Fri Mar 05, 2010 6:26 am

drewriviera wrote:Nice!!! Super Clean...just how I like them!!
haha thanks :D
after this thing the top two mods I will ever recommend to anyone is a VF43(or equivalent) and a JDM STi trans. The rear wheel bias is freakin AWESOME!!!
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

SubiePrice88
Third Gear
Posts: 617
Joined: Thu Dec 13, 2007 5:41 am
Location: Spokane,Wa

Re: New SS: 1993 Legacy Turbo

Post by SubiePrice88 » Fri Mar 05, 2010 6:33 am

Very Nice! I love the silver, every time I see a clean silver SS it gives me hope
-Jordan

"Nothing Stings Like a Subee"

1992 Legacy SS, 5MT, 140k, some mods ;)
1993 Legacy Wagon, 5MT, 220k!

Kelly
Fourth Gear
Posts: 1286
Joined: Sat Nov 01, 2003 5:35 pm
Contact:

Re: New SS: 1993 Legacy Turbo

Post by Kelly » Fri Mar 05, 2010 6:14 pm

And its faster than your dad's Boxter... :wink:

logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Re: New SS: 1993 Legacy Turbo

Post by logan9691 » Fri Mar 05, 2010 7:17 pm

Haha he would never admit that :P
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

Florin1
Fourth Gear
Posts: 1173
Joined: Thu Dec 24, 2009 1:24 am
Location: Lynnwood, Wa.

Re: New SS: 1993 Legacy Turbo

Post by Florin1 » Tue Mar 09, 2010 7:26 am

You aren't running EM with all those mods?
1994 Legacy Sport Sedan.
1991 Legacy Sport Sedan.

logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Re: New SS: 1993 Legacy Turbo

Post by logan9691 » Tue Mar 09, 2010 8:29 am

haha nope. runs just fine, just has an angry idle some times.
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

dropdfocus
Fourth Gear
Posts: 1937
Joined: Sun Sep 07, 2003 5:57 am
Location: Williamsport, PA
Contact:

Re: New SS: 1993 Legacy Turbo

Post by dropdfocus » Tue Mar 09, 2010 11:41 am

So very hot! Silver FTW! (ok, so I'm a little biased. :mrgreen: )
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces

logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Re: New SS: 1993 Legacy Turbo

Post by logan9691 » Tue Mar 09, 2010 8:28 pm

dropdfocus wrote:So very hot! Silver FTW! (ok, so I'm a little biased. :mrgreen: )
Hey do you have phase 1 DOHC heads on yours?
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

dropdfocus
Fourth Gear
Posts: 1937
Joined: Sun Sep 07, 2003 5:57 am
Location: Williamsport, PA
Contact:

Re: New SS: 1993 Legacy Turbo

Post by dropdfocus » Wed Mar 10, 2010 2:17 am

Stockers for now... I have EJ20G heads sitting awaiting valve train rebuild. :twisted: I'll be adding Delta Cam's 272 series cams in place of the JDM WRX factory cams.
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces

logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Re: New SS: 1993 Legacy Turbo

Post by logan9691 » Wed Mar 10, 2010 7:04 pm

dropdfocus wrote:Stockers for now... I have EJ20G heads sitting awaiting valve train rebuild. :twisted: I'll be adding Delta Cam's 272 series cams in place of the JDM WRX factory cams.
Ahhh ok. I'm lookin for someone who has put the 2.5 DOHC heads on cause I need to know what head studs and head gaskets to get.
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

dropdfocus
Fourth Gear
Posts: 1937
Joined: Sun Sep 07, 2003 5:57 am
Location: Williamsport, PA
Contact:

Re: New SS: 1993 Legacy Turbo

Post by dropdfocus » Wed Mar 10, 2010 11:42 pm

You can use the EJ25D head studs. As for h/g's that will depend on what compression ratio you want. I believe I have the Microsoft Excel spreadsheet that one of the guys put together that allows you to figure it out. It's likley buried on my external hard drive somewhere.
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces

BlockerImp
First Gear
Posts: 107
Joined: Sun Oct 09, 2005 8:16 am
Location: Seattle, Wa

Re: New SS: 1993 Legacy Turbo

Post by BlockerImp » Mon Apr 12, 2010 9:03 am

hey Logan, i know i never got the chance to meet you. But im glad to see you happy with my former car. I certainly sold it to the right person whos taking good care of it.

Driving a 98 impreza L instead of the SS really makes me miss her. But commuting 50miles a day made it kinda necessary.
i'll keep checking the boards for future updates. Hope to see some more cool things in the future.

logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Re: New SS: 1993 Legacy Turbo

Post by logan9691 » Thu Apr 15, 2010 8:50 pm

BlockerImp wrote:hey Logan, i know i never got the chance to meet you. But im glad to see you happy with my former car. I certainly sold it to the right person whos taking good care of it.

Driving a 98 impreza L instead of the SS really makes me miss her. But commuting 50miles a day made it kinda necessary.
i'll keep checking the boards for future updates. Hope to see some more cool things in the future.
Ya this car has been a lot of fun to work on. next up FMIC w/ synchronic BOV, Electronic Boost Controller, Wide band and then this summer gonna throw some EJ25 DOHC heads on it for some better air flow, then I get to tackle some tuning. Gonna be some fun :D
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

Kecksauce
First Gear
Posts: 60
Joined: Fri Jul 31, 2009 12:34 am
Location: Columbus, OH
Contact:

Re: New SS: 1993 Legacy Turbo

Post by Kecksauce » Wed Apr 21, 2010 12:40 am

Very nice sir.

Did the sti seats bolt right up?
-'06 Impreza 2.5i wagon
-'93 Legacy SS

logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Re: New SS: 1993 Legacy Turbo

Post by logan9691 » Wed Apr 21, 2010 1:00 am

Kecksauce wrote:Very nice sir.

Did the sti seats bolt right up?
Yes they do. You sit high but I like it.
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

dropdfocus
Fourth Gear
Posts: 1937
Joined: Sun Sep 07, 2003 5:57 am
Location: Williamsport, PA
Contact:

Re: New SS: 1993 Legacy Turbo

Post by dropdfocus » Wed Apr 21, 2010 1:48 am

Impreza seats cause you sit higher in the Legacy interior.
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces

logan9691
Second Gear
Posts: 306
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Re: New SS: 1993 Legacy Turbo

Post by logan9691 » Wed Apr 21, 2010 1:58 am

dropdfocus wrote:Impreza seats cause you sit higher in the Legacy interior.
Pretty sure almost every newer Subaru seat will cause you to sit higher in the legacy, unless you make your own seat brackets or get some racing seats.
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

Post Reply