Picked up a Perfect Power finally,
But I then realized I didnt have a wiring/install diagram.
But I KNOW some of you have installed them, care to share the wiring diagram?
Thanks!!!!!!
Perfect Power install diagram?
Moderators: Helpinators, Moderators
-
douglas vincent
- Knowledgeable
- Posts: 3336
- Joined: Sun Apr 27, 2003 5:50 am
- Location: OR, Portland
- Contact:
Perfect Power install diagram?
Reddevil, Awaiting new heart, will it ever happen?
1990 wagon, EJ25 12.3 @ 116.5 FAST Family wagon getting new motor soon
1992 wagon, wifes daily, high compression
1992 Touring wagon, should I keep it?
1990 wagon, EJ25 12.3 @ 116.5 FAST Family wagon getting new motor soon
1992 wagon, wifes daily, high compression
1992 Touring wagon, should I keep it?
-
douglas vincent
- Knowledgeable
- Posts: 3336
- Joined: Sun Apr 27, 2003 5:50 am
- Location: OR, Portland
- Contact:
Nothing for a legacy there, already checked.
Unless the legacy is the same as a WRX or RS or what not.
Unless the legacy is the same as a WRX or RS or what not.
Reddevil, Awaiting new heart, will it ever happen?
1990 wagon, EJ25 12.3 @ 116.5 FAST Family wagon getting new motor soon
1992 wagon, wifes daily, high compression
1992 Touring wagon, should I keep it?
1990 wagon, EJ25 12.3 @ 116.5 FAST Family wagon getting new motor soon
1992 wagon, wifes daily, high compression
1992 Touring wagon, should I keep it?
Sorry, didn't look that far. I was already checking out their site in another window when I read your thread.
'91 5MT SS-TD04, WRX TMIC, Bosal twin dump, Spec LW flywheel/pressure plate, FCD, Walbro fuel pump-RIP
'93 5MT N/A wagon, over 400,000 miles!-Gone, parts lived on
'94 Auto SS-vf24, WRX TMIC, Bosal twin dump, Meth kit coming soon!-Now RWD!
'93 5MT N/A wagon, over 400,000 miles!-Gone, parts lived on
'94 Auto SS-vf24, WRX TMIC, Bosal twin dump, Meth kit coming soon!-Now RWD!
Doug,
After looking over the developer's manual a little, there doesn't appear to be a "straight forward" way to install it.
The reason I say that is because you can use throttle sensor for the deflection signal (to give the PP an idea of engine load), or the MAF sensor.
My setup may be a little different then yours. I know when I was looking through it, I had some questions on which ignition signal it was as well.
I talked to Sean about it, and he said he could have that all setup when I bought it. I'd try talking to sean or kelley, especially if they've done a 1st gen legacy.
I'd like to see what they recommend to use.
After looking over the developer's manual a little, there doesn't appear to be a "straight forward" way to install it.
The reason I say that is because you can use throttle sensor for the deflection signal (to give the PP an idea of engine load), or the MAF sensor.
My setup may be a little different then yours. I know when I was looking through it, I had some questions on which ignition signal it was as well.
I talked to Sean about it, and he said he could have that all setup when I bought it. I'd try talking to sean or kelley, especially if they've done a 1st gen legacy.
I'd like to see what they recommend to use.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm