Hey guys,
I've recently changed my front rotors and pads on my '91 Legacy
U.S. spec, turbo with 15" wheels with stock size rotors. The pads
are from Metal Masters. My problem is multi-faceted. First, the
pads weren't the same size as the O.E. pads, so I couldn't fit the
shims and the only one of the two anti-rattle clips would go on each
rotor. Secondly, I took it for a test drive to bed the pads and I'm
getting a metallic noise from the right (passenger side) rotor.
Could it be a rattle clip in the way. Do I need to find a proper
sized shim? All advice is greatly appreciated. Also I tried another
source of pads and they were identical to the Metal Masters.
Thanks,
Andrew Mouser
------------------------ ---------------------~-->
Take the Yahoo! Groups survey for a chance to win $1,000.
Your opinion is very important to us!
http://us.click.yahoo.com/NOFBfD/uAJEAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
Front Brake Work Problem
Moderators: Helpinators, Moderators
-
Rod
Front Brake Work Problem
is the noise there constantly or just when applying the brakes? If constant something is scraping, jack up the car remove the wheel turn the disc to see where.
If the pads were the wrong size I would not have fitted them and perhaps looked at a different brand..
cheers, Rod
----- Original Message -----
From: furtherrad <mailto:furtherrad@yahoo.com>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Sunday, May 19, 2002 76 AM
Subject: [BC-BFLegacyWorks] Front Brake Work Problem
Hey guys,
I've recently changed my front rotors and pads on my '91 Legacy
U.S. spec, turbo with 15" wheels with stock size rotors. The pads
are from Metal Masters. My problem is multi-faceted. First, the
pads weren't the same size as the O.E. pads, so I couldn't fit the
shims and the only one of the two anti-rattle clips would go on each
rotor. Secondly, I took it for a test drive to bed the pads and I'm
getting a metallic noise from the right (passenger side) rotor.
Could it be a rattle clip in the way. Do I need to find a proper
sized shim? All advice is greatly appreciated. Also I tried another
source of pads and they were identical to the Metal Masters.
Thanks,
Andrew Mouser
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=226014.2032696.35 ... 000239/R=1>
<http://us.adserver.yahoo.com/l?M=226014 ... =570504438>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
If the pads were the wrong size I would not have fitted them and perhaps looked at a different brand..
cheers, Rod
----- Original Message -----
From: furtherrad <mailto:furtherrad@yahoo.com>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Sunday, May 19, 2002 76 AM
Subject: [BC-BFLegacyWorks] Front Brake Work Problem
Hey guys,
I've recently changed my front rotors and pads on my '91 Legacy
U.S. spec, turbo with 15" wheels with stock size rotors. The pads
are from Metal Masters. My problem is multi-faceted. First, the
pads weren't the same size as the O.E. pads, so I couldn't fit the
shims and the only one of the two anti-rattle clips would go on each
rotor. Secondly, I took it for a test drive to bed the pads and I'm
getting a metallic noise from the right (passenger side) rotor.
Could it be a rattle clip in the way. Do I need to find a proper
sized shim? All advice is greatly appreciated. Also I tried another
source of pads and they were identical to the Metal Masters.
Thanks,
Andrew Mouser
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=226014.2032696.35 ... 000239/R=1>
<http://us.adserver.yahoo.com/l?M=226014 ... =570504438>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Andrew Mouser
Front Brake Work Problem
I'd say it's pretty constant scraping with increase
when the brakes are applied. I'm going to see if I
can match up the old pads at the parts store. Thanks
for your help.
Andrew
--- Rod <melrod@optusnet.com.au> wrote:
> is the noise there constantly or just when applying
> the brakes? If constant something is scraping, jack
> up the car remove the wheel turn the disc to see
> where.
> If the pads were the wrong size I would not have
> fitted them and perhaps looked at a different
> brand..
> cheers, Rod
> ----- Original Message -----
> From: furtherrad
> To: BC-BFLegacyWorks@yahoogroups.com
> Sent: Sunday, May 19, 2002 76 AM
> Subject: [BC-BFLegacyWorks] Front Brake Work
> Problem
>
>
> Hey guys,
> I've recently changed my front rotors and pads
> on my '91 Legacy
> U.S. spec, turbo with 15" wheels with stock size
> rotors. The pads
> are from Metal Masters. My problem is
> multi-faceted. First, the
> pads weren't the same size as the O.E. pads, so I
> couldn't fit the
> shims and the only one of the two anti-rattle
> clips would go on each
> rotor. Secondly, I took it for a test drive to
> bed the pads and I'm
> getting a metallic noise from the right (passenger
> side) rotor.
> Could it be a rattle clip in the way. Do I need
> to find a proper
> sized shim? All advice is greatly appreciated.
> Also I tried another
> source of pads and they were identical to the
> Metal Masters.
> Thanks,
> Andrew Mouser
>
>
>
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
>
__________________________________________________
Do You Yahoo!?
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com
------------------------ ---------------------~-->
Take the Yahoo! Groups survey for a chance to win $1,000.
Your opinion is very important to us!
http://us.click.yahoo.com/NOFBfD/uAJEAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
when the brakes are applied. I'm going to see if I
can match up the old pads at the parts store. Thanks
for your help.
Andrew
--- Rod <melrod@optusnet.com.au> wrote:
> is the noise there constantly or just when applying
> the brakes? If constant something is scraping, jack
> up the car remove the wheel turn the disc to see
> where.
> If the pads were the wrong size I would not have
> fitted them and perhaps looked at a different
> brand..
> cheers, Rod
> ----- Original Message -----
> From: furtherrad
> To: BC-BFLegacyWorks@yahoogroups.com
> Sent: Sunday, May 19, 2002 76 AM
> Subject: [BC-BFLegacyWorks] Front Brake Work
> Problem
>
>
> Hey guys,
> I've recently changed my front rotors and pads
> on my '91 Legacy
> U.S. spec, turbo with 15" wheels with stock size
> rotors. The pads
> are from Metal Masters. My problem is
> multi-faceted. First, the
> pads weren't the same size as the O.E. pads, so I
> couldn't fit the
> shims and the only one of the two anti-rattle
> clips would go on each
> rotor. Secondly, I took it for a test drive to
> bed the pads and I'm
> getting a metallic noise from the right (passenger
> side) rotor.
> Could it be a rattle clip in the way. Do I need
> to find a proper
> sized shim? All advice is greatly appreciated.
> Also I tried another
> source of pads and they were identical to the
> Metal Masters.
> Thanks,
> Andrew Mouser
>
>
>
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
>
__________________________________________________
Do You Yahoo!?
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com
------------------------ ---------------------~-->
Take the Yahoo! Groups survey for a chance to win $1,000.
Your opinion is very important to us!
http://us.click.yahoo.com/NOFBfD/uAJEAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
Josh Colombo
Front Brake Work Problem
Those damn anti-rattle pads make more noise then they're supposed to
fix. Keep the little clips that go on the caliper there. But the ones
that go on the back of the pad....get rid of them. Buy some of the disc
brake quieter stuff.....get the red paste stuff from crc. it works the
best....smear it all over the back of the pad.....and you should be
golden.
That's the only stuff I've found that works very good.
Josh
************************************
Josh Colombo
Josh@surrealmirage.com <mailto:Josh@surrealmirage.com>
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: furtherrad [mailto:furtherrad@yahoo.com]
Sent: Saturday, May 18, 2002 46 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Front Brake Work Problem
Hey guys,
I've recently changed my front rotors and pads on my '91 Legacy
U.S. spec, turbo with 15" wheels with stock size rotors. The pads
are from Metal Masters. My problem is multi-faceted. First, the
pads weren't the same size as the O.E. pads, so I couldn't fit the
shims and the only one of the two anti-rattle clips would go on each
rotor. Secondly, I took it for a test drive to bed the pads and I'm
getting a metallic noise from the right (passenger side) rotor.
Could it be a rattle clip in the way. Do I need to find a proper
sized shim? All advice is greatly appreciated. Also I tried another
source of pads and they were identical to the Metal Masters.
Thanks,
Andrew Mouser
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Take the Yahoo! Groups survey for a chance to win $1,000.
Your opinion is very important to us!
http://us.click.yahoo.com/NOFBfD/uAJEAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
fix. Keep the little clips that go on the caliper there. But the ones
that go on the back of the pad....get rid of them. Buy some of the disc
brake quieter stuff.....get the red paste stuff from crc. it works the
best....smear it all over the back of the pad.....and you should be
golden.
That's the only stuff I've found that works very good.
Josh
************************************
Josh Colombo
Josh@surrealmirage.com <mailto:Josh@surrealmirage.com>
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: furtherrad [mailto:furtherrad@yahoo.com]
Sent: Saturday, May 18, 2002 46 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Front Brake Work Problem
Hey guys,
I've recently changed my front rotors and pads on my '91 Legacy
U.S. spec, turbo with 15" wheels with stock size rotors. The pads
are from Metal Masters. My problem is multi-faceted. First, the
pads weren't the same size as the O.E. pads, so I couldn't fit the
shims and the only one of the two anti-rattle clips would go on each
rotor. Secondly, I took it for a test drive to bed the pads and I'm
getting a metallic noise from the right (passenger side) rotor.
Could it be a rattle clip in the way. Do I need to find a proper
sized shim? All advice is greatly appreciated. Also I tried another
source of pads and they were identical to the Metal Masters.
Thanks,
Andrew Mouser
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Take the Yahoo! Groups survey for a chance to win $1,000.
Your opinion is very important to us!
http://us.click.yahoo.com/NOFBfD/uAJEAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com