Where To Buy in Washington: T-bolt clamps ?

Got something for sale? Need to sell a part? Got some stuff on auction that you want to let us know about?

(Legacy Central BBS is not responsible for any arbitration between its users relative to this forum.
Play nice and deal straight)

Moderators: Helpinators2, Moderators

Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814

Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Post Reply
253.Asmo
First Gear
Posts: 214
Joined: Wed Sep 13, 2006 9:59 am
Location: Seattle, WA

Where To Buy in Washington: T-bolt clamps ?

Post by 253.Asmo »

Trying to find somewhere local to Tacoma, WA that sells T-bolt style clamps. Trying to avoid having to order another thing from damn internet

Thanks,
Matt
'94 White SS / 5MT - daily, absolute piece of a beater

'90 Red Sedan - EJ22T / 5mt Swap - drove it, SOLD it

'91 black SS / 5MT - (215/230k miles. eng/body)
[RIP - drove, hit, cracked a piston, swapped and stripped for swap again]
Top
gijonas
Fourth Gear
Posts: 1010
Joined: Sat Nov 08, 2008 10:57 pm
Location: Damariscotta, Maine

Post by gijonas »

try the internet.just kidding.look at a marine supply,thats where i get mine.
94SS.Wiseco forged pistons,TD04,TMIC,WALBRO 225,440's,3" all the way,revtronix stage 2,enough other crap to fill the internet.

THE TRIBUTE BUILD>>>LINKY LINK>>> http://bbs.legacycentral.org/viewtopic.php?p=295455#295455
Top
BSOD2600
Fourth Gear
Posts: 1636
Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA

Post by BSOD2600 »

I had the same problem... and smart-ass responses.

Anyways, http://www.bloodenterprises.com/ is in Auburn and had an assortment of them and silicone tubing connectors. Also each shucks store carries ONE 3" t-clamp in stock.

'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
Top
SLODRIVE
Third Gear
Posts: 662
Joined: Fri Nov 21, 2008 1:27 am
Location: Colorado, north of Highway 52
Contact:
Contact SLODRIVE

Post by SLODRIVE »

Try the local NAPA parts store. They should be able to get them no problem, that is if they don't already have them in stock.
http://www.slodriveracing.com
-92 SS 5MT- EJ20H swap, Haltech standalone ECU, TD04, FXT TMIC, 3" exhaust, STi/AGX struts, JDM 5-speed, 4.111 LSD rear, Blitz EBC, etc.
-'93 L Wagon - Pink Roll Cage - "Dirty Leg"
-And more!
Top
kimokalihi
Fifth Gear
Posts: 8360
Joined: Mon Nov 06, 2006 3:41 am
Location: Tenino, WA

Post by kimokalihi »

BSOD2600 wrote:I had the same problem... and smart-ass responses.

Anyways, http://www.bloodenterprises.com/ is in Auburn and had an assortment of them and silicone tubing connectors. Also each shucks store carries ONE 3" t-clamp in stock.

BAHAHAHAHAHAHA! Schucks is the shittiest auto parts store I've ever been in. I hate that place.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Top
BSOD2600
Fourth Gear
Posts: 1636
Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA

Post by BSOD2600 »

Agreed, but I needed 2x 3" t-clamps for the intake. Had to drive to two damn stores to get them to finish my TMIC install. So dumb.

'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
Top
epicfail
First Gear
Posts: 107
Joined: Sun Aug 10, 2008 12:12 am

Post by epicfail »

Try big truck parts sales (Freightliner, International, Mack etc.). They usually use heavy-duty clamps for after-turbo hoses.
[quote="RJ93SS"]u fail, epicly[/quote][quote="evolutionmovement"]Don't do drugs, kids, men may not need nipples, but we look a lot funnier without them.[/quote]
Top
253.Asmo
First Gear
Posts: 214
Joined: Wed Sep 13, 2006 9:59 am
Location: Seattle, WA

Post by 253.Asmo »

gijonas wrote:try the internet.just kidding.look at a marine supply,thats where i get mine.
Thanks, I hadn't thought of a marine store at all, and I work about 5 minutes from West Marine in Fife. They had a pretty decent selection of t-clamps and other higher-grade clamps. Downside being they cost about $13 apiece! Oh well, what's another $60 anyways? :-/
epicfail wrote:Try big truck parts sales (Freightliner, International, Mack etc.). They usually use heavy-duty clamps for after-turbo hoses.
This was what a friend recommended, good call.


Thanks guys, exactly what I was looking for :)

Matt
'94 White SS / 5MT - daily, absolute piece of a beater

'90 Red Sedan - EJ22T / 5mt Swap - drove it, SOLD it

'91 black SS / 5MT - (215/230k miles. eng/body)
[RIP - drove, hit, cracked a piston, swapped and stripped for swap again]
Top
Post Reply

Return to “Parts Shed”