will this timing belt kit work?
Moderators: Helpinators, Moderators
will this timing belt kit work?
1993 legacy ss "Shela"
-
- Fifth Gear
- Posts: 6322
- Joined: Fri Jun 20, 2008 8:17 am
- Location: Lakewood, Wa 98439
- Contact:
Re: will this work?
it should work fine
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
Re: will this work?
it looks like it for a N/A with the water pump but all the bearing and belt will work.
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: will this work?
The turbo pump has some additional fittings and the housing for the thermostat bolts to the side instead of the bottom of the pump.
From the picture that is definitely not a turbo pump. Here's pics of a turbo pump:
http://www.main.experiencetherave.com/s ... P_4741.JPG
http://www.main.experiencetherave.com/s ... P_4742.JPG
http://www.main.experiencetherave.com/s ... P_4743.JPG
http://www.main.experiencetherave.com/s ... P_4988.JPG
From the picture that is definitely not a turbo pump. Here's pics of a turbo pump:
http://www.main.experiencetherave.com/s ... P_4741.JPG
http://www.main.experiencetherave.com/s ... P_4742.JPG
http://www.main.experiencetherave.com/s ... P_4743.JPG
http://www.main.experiencetherave.com/s ... P_4988.JPG
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: will this work?
and that pump will work with all years legacy sport sedans?
1993 legacy ss "Shela"
Re: will this work?
The pump I have and that is in the picture has the extra port for the oil cooler. If you do not have the oil cooler, there's a different part # for that pump. Or you can use a nipple and clamp to cap off the extra port for the oil cooler.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: will this work?
You need the '92-94 SS/TW EJ22T pump for your '93.
The '91 used the pump w/the extra port to the oil cooler - it's the same pump used on the WRX '02-04 (double-check).
Just get the correct pump for your year so you don't have to mess w/it. The pumps are about the same price, regardless of year.
You should also replace the thermostat and its gasket.
I can personally recommend the 'TheImportexperts' on Ebay.
Plz update your Title, such as 'Will this Timing belt kit work'?
GL,
Td
The '91 used the pump w/the extra port to the oil cooler - it's the same pump used on the WRX '02-04 (double-check).
Just get the correct pump for your year so you don't have to mess w/it. The pumps are about the same price, regardless of year.
You should also replace the thermostat and its gasket.
I can personally recommend the 'TheImportexperts' on Ebay.
Plz update your Title, such as 'Will this Timing belt kit work'?
GL,
Td
Last edited by wtdash on Fri Jun 24, 2011 7:25 pm, edited 1 time in total.
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
Re: will this work?
As Todd mentioned, you're better off getting the correct pump, and what I was referring to was simply a little rubber cap (made to withstand pressure) to go over that port with a clamp.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: will this timing belt kit work?
I figure the right pump would be best as well, I was just curious how you'd cap it considering the pressure
1993 legacy ss "Shela"
Re: will this timing belt kit work?
It's on the suction side of the pump, so it's lower pressure.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm