TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Moderator: Moderators
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Here we go!
I have been a Subaru fan since I was able to drive, growing up in the pacific NW didn't help the urge either. I am the proud owner of now three legacys. A built 2005 Legacy 2.5GT, DD 1997 Legacy Birghton Wagon, and my new/old 1993 Legacy Sport Sedan. All of my friends had WRXs and STis but I wanted something different. I had been pushed internally to try to out do them by building my 05 to the point of unreliable. Blouch 20GXT, built block, full Suspension, loud external, and plans to make it crazier still. I had purchased another legacy to DD that I ended up falling in love with and then it happened.....my GT spun a rod bearing. It started to remind me how much I loved older obd1 cars and how simple they were and the really fit what I wanted in a car. The search began for the perfect SS and rebuilding my GT.
I made a deal with wtdash for his SS in Idaho and for all intensive purposes, the car was perfect. The few mods that were done made it perfect and I wanted a mostly stock legacy with zero rust and a good history. It has receipts like no other car I've ever seen and meticulously taken care of. I just picked it up today and now the journey begins to drive it back to Southern California from Idaho.
Here are a couple photos of my other cars and some pics of parts and parts list of what I've already purchased for the SS.
Stay tuned
My 05
My Brighton
And my new baby
Some pics of some of the new parts for the SS
V7 STi struts and JDM pink springs
Parts I've gathered this far, I'll post more pics when I set it out
Engine
Spare EJ22T Long Block
06 WRX Top Mount
TD05 16G Turbo
STi 550cc Injectors
Hallman MBC
EJ22 NA Fuel Rails
Robtune ECU
Ron's Ignition Converter
Jegs Green Label MAF
Diamond Coil Pack
Suspension:
V7 STi Struts
STi Pink Springs
GC Aluminum Control Arm
WRX Wagon Lateral Links with TIC bushings
Kartboy Exhaust Hangers 4
Kartboy Solid Endlinks F\R
Whiteline 22mm Front Sway Bar
Whiteline 22mm SB Locks
Whiteline 22mm Adj Rear Sway Bar
Whiteline 22mm SB Locks
Whiteline Sway Bar Mounts
Whiteline Steering Rack Bushings
Whiteline Positive Caster Kit
Whiteline Front Control Arm Bushings
SuperPro Roll-Center/Bumpsteer Kit
Brakes:
Grimmspeed BMC Brace
05 STi Brembos F/R
- Pads
- Rotors
Goodridge SS Brake Lines
Driveline:
Competition Stage 3 Clutch and Flywheel
Group N Engine Mounts
Group N Transmission Mount
Interior
04 STi Steering Wheel
04 STi F/R Seats
04 STi Floormats
I have many parts on order
This car will be my canyon carver
I have been a Subaru fan since I was able to drive, growing up in the pacific NW didn't help the urge either. I am the proud owner of now three legacys. A built 2005 Legacy 2.5GT, DD 1997 Legacy Birghton Wagon, and my new/old 1993 Legacy Sport Sedan. All of my friends had WRXs and STis but I wanted something different. I had been pushed internally to try to out do them by building my 05 to the point of unreliable. Blouch 20GXT, built block, full Suspension, loud external, and plans to make it crazier still. I had purchased another legacy to DD that I ended up falling in love with and then it happened.....my GT spun a rod bearing. It started to remind me how much I loved older obd1 cars and how simple they were and the really fit what I wanted in a car. The search began for the perfect SS and rebuilding my GT.
I made a deal with wtdash for his SS in Idaho and for all intensive purposes, the car was perfect. The few mods that were done made it perfect and I wanted a mostly stock legacy with zero rust and a good history. It has receipts like no other car I've ever seen and meticulously taken care of. I just picked it up today and now the journey begins to drive it back to Southern California from Idaho.
Here are a couple photos of my other cars and some pics of parts and parts list of what I've already purchased for the SS.
Stay tuned
My 05
My Brighton
And my new baby
Some pics of some of the new parts for the SS
V7 STi struts and JDM pink springs
Parts I've gathered this far, I'll post more pics when I set it out
Engine
Spare EJ22T Long Block
06 WRX Top Mount
TD05 16G Turbo
STi 550cc Injectors
Hallman MBC
EJ22 NA Fuel Rails
Robtune ECU
Ron's Ignition Converter
Jegs Green Label MAF
Diamond Coil Pack
Suspension:
V7 STi Struts
STi Pink Springs
GC Aluminum Control Arm
WRX Wagon Lateral Links with TIC bushings
Kartboy Exhaust Hangers 4
Kartboy Solid Endlinks F\R
Whiteline 22mm Front Sway Bar
Whiteline 22mm SB Locks
Whiteline 22mm Adj Rear Sway Bar
Whiteline 22mm SB Locks
Whiteline Sway Bar Mounts
Whiteline Steering Rack Bushings
Whiteline Positive Caster Kit
Whiteline Front Control Arm Bushings
SuperPro Roll-Center/Bumpsteer Kit
Brakes:
Grimmspeed BMC Brace
05 STi Brembos F/R
- Pads
- Rotors
Goodridge SS Brake Lines
Driveline:
Competition Stage 3 Clutch and Flywheel
Group N Engine Mounts
Group N Transmission Mount
Interior
04 STi Steering Wheel
04 STi F/R Seats
04 STi Floormats
I have many parts on order
This car will be my canyon carver
Last edited by teriyakibbs on Wed Nov 12, 2014 11:32 pm, edited 2 times in total.
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Glad Todd's car went to a good home. I wondered if the new owner would make it on here. Good looking set of cars you have there.
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Welcome to the BBS.
One comment for you based on the list of parts you have
Take a look at some of the threads in the stickies in the various forums. There is a lot of info out there.
One comment for you based on the list of parts you have
If you plan to keep the ej22t manifold, these rails will not work. You can pick up a set of 92-94 non-turbo Legacy fuel rails. They bolt in to the ej22t intake manifold and will accept the yellow STi 550 cc/min injectors.EJ25D Fuel Rails
Take a look at some of the threads in the stickies in the various forums. There is a lot of info out there.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Ya thanksLegacy777 wrote:Welcome to the BBS.
One comment for you based on the list of parts you have
If you plan to keep the ej22t manifold, these rails will not work. You can pick up a set of 92-94 non-turbo Legacy fuel rails. They bolt in to the ej22t intake manifold and will accept the yellow STi 550 cc/min injectors.EJ25D Fuel Rails
Take a look at some of the threads in the stickies in the various forums. There is a lot of info out there.
I realize they are EJ22 fuel rails not EJ25D
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Last edited by teriyakibbs on Wed Nov 12, 2014 11:33 pm, edited 1 time in total.
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
I sold the Invidia downpipe and agency power headers I had because I felt they were not a great fit for my build. Want to keep it OEM+ STi or direct fitment. I found a very expensive deal on a full MRT turbo back exhaust that's made specific for 1 gen legacy. I have found a full setup on an OEM water to air Intercooler but I haven't decided of I'm going to do that or a V1/V2 slant intercooler. Need to find a writeup for the AWIC.
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Interior is in
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Last edited by teriyakibbs on Wed Nov 12, 2014 11:34 pm, edited 1 time in total.
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Nice. Do the rear seats fit nicely on the sides?
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
i remember your red brighton i sold you the rear brembos.. your SS is gonna be sick lol
Always open to learn
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
I have to do some rear filling on the rear hooks for the seat because they sit high. But other then that they fit well.GTEASER wrote:Nice. Do the rear seats fit nicely on the sides?
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Those brembos are going on this car! Nice to see you're on the forum.GTEASER wrote:Nice. Do the rear seats fit nicely on the sides?
I really want to start a legacy specific meet but I just don't think there is enough cars in California to do it.
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Yea they are not very common most people that like Subarus here are into the GD chassis and up
Always open to learn
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Here are my AWIC threads.teriyakibbs wrote:Need to find a writeup for the AWIC.
http://bbs.legacycentral.org/viewtopic.php?f=3&t=23089
http://bbs.legacycentral.org/viewtopic.php?f=3&t=35394
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Small update today
Installed STi Shifter Suround and a LGT leather boot, I'll have to do some more trimming of the plastic but you frankly can't tell. I have my new 5mt STi leather shift knob coming in tomorrow.
Finally installed my WRX pedal set I had laying around and the STi steering wheel.
I'm thinking of using fabric paint on the door cards to get rid of the confetti look.
Got the Grimmspeed Brake Master Cylinder Brace and Kartboy pitch stop mount to sit perfect with zero issues like it was made for the car.
Installed STi Shifter Suround and a LGT leather boot, I'll have to do some more trimming of the plastic but you frankly can't tell. I have my new 5mt STi leather shift knob coming in tomorrow.
Finally installed my WRX pedal set I had laying around and the STi steering wheel.
I'm thinking of using fabric paint on the door cards to get rid of the confetti look.
Got the Grimmspeed Brake Master Cylinder Brace and Kartboy pitch stop mount to sit perfect with zero issues like it was made for the car.
Last edited by teriyakibbs on Wed Nov 12, 2014 11:34 pm, edited 1 time in total.
-
- Third Gear
- Posts: 897
- Joined: Fri Dec 25, 2009 8:21 am
- Location: Arvada, CO
- Contact:
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
-Nice build, I like where this is going.
-Joe
-Joe
-I'd rather loose by a mile because I built my own car, than win by an inch cause someone else built it for me. Your car, is your story, so don't let someone else write the book. ~Moog
-
- Fifth Gear
- Posts: 6322
- Joined: Fri Jun 20, 2008 8:17 am
- Location: Lakewood, Wa 98439
- Contact:
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Nice progress, Keep up the good work! Those seats look great in there too.
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Last edited by teriyakibbs on Wed Nov 12, 2014 11:35 pm, edited 1 time in total.
-
- In Neutral
- Posts: 17
- Joined: Wed Nov 20, 2013 6:48 pm
- Location: Socal
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Last edited by teriyakibbs on Wed Nov 12, 2014 11:36 pm, edited 1 time in total.
Re: TeriyakiBBS Legacy SS Build!! Nostalgic STi/OEM+ Build
Shifter surround and knob look good, factory good
Tony
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
92ss satinsvoice wrote:LOL! that block was like F*** THIS! IM OUT!
mike-tracy wrote:Word. I'd love to get my hands on one of those trannies, but I just can't stomach the cost