Robtune 550cc

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
JimBos Legacy
First Gear
Posts: 94
Joined: Fri Nov 17, 2017 2:16 am

Robtune 550cc

Post by JimBos Legacy »

If I were to run 550cc Top feed injectors, instead of running the adapters for the yellow top side feed injectors, would the 550 tune still work? I found some 550cc top feed injectors online awhile searching around


Sent from my iPhone using Tapatalk
JimBo

1992 JDM Subaru Legacy GT wagon
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Robtune 550cc

Post by Legacy777 »

I don't think the injector latency (dead) times are going to be the same between the side & top feeds. If you can find that information about both types of injectors you could clarify that.

Are you planning on using a different intake manifold? If not I think fitting the top feeds on there would take a lot of work.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
JimBos Legacy
First Gear
Posts: 94
Joined: Fri Nov 17, 2017 2:16 am

Re: Robtune 550cc

Post by JimBos Legacy »

Legacy777 wrote:I don't think the injector latency (dead) times are going to be the same between the side & top feeds. If you can find that information about both types of injectors you could clarify that.

Are you planning on using a different intake manifold? If not I think fitting the top feeds on there would take a lot of work.
I read somewhere that too feeds would work on the stock fuel rails without the adapters. Maybe I read wrong. Phase 2 adapters seem to more commonly available then I thought. Probably would end up being easier to get the yellow tops and adapters.


Sent from my iPhone using Tapatalk
JimBo

1992 JDM Subaru Legacy GT wagon
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Robtune 550cc

Post by Legacy777 »

Top feeds will not work on the first gen Legacy fuel rails.

What adapters are you thinking of using?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
JimBos Legacy
First Gear
Posts: 94
Joined: Fri Nov 17, 2017 2:16 am

Re: Robtune 550cc

Post by JimBos Legacy »

Legacy777 wrote:Top feeds will not work on the first gen Legacy fuel rails.

What adapters are you thinking of using?
One of the kits I found is by a company called Deatschwerks, haven’t looked around the fourms to see if any one else has used them.


Sent from my iPhone using Tapatalk
JimBo

1992 JDM Subaru Legacy GT wagon
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Robtune 550cc

Post by Legacy777 »

That kit is for the Newer Subaru manifolds. I don't know if they would be a direct fitment on our cars without some work.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
JimBos Legacy
First Gear
Posts: 94
Joined: Fri Nov 17, 2017 2:16 am

Re: Robtune 550cc

Post by JimBos Legacy »

Legacy777 wrote:That kit is for the Newer Subaru manifolds. I don't know if they would be a direct fitment on our cars without some work.
I’ll take a look at the injectors and see if it looks like it’ll bolt up


Sent from my iPhone using Tapatalk
JimBo

1992 JDM Subaru Legacy GT wagon
carfreak85
First Gear
Posts: 161
Joined: Fri Jan 16, 2004 12:04 am
Location: Cascadia
Contact:

Re: Robtune 550cc

Post by carfreak85 »

JimBos Legacy wrote:If I were to run 550cc Top feed injectors, instead of running the adapters for the yellow top side feed injectors, would the 550 tune still work? I found some 550cc top feed injectors online awhile searching around.
The tune was developed with a specific set of hardware in mind. Deviating from that exact list of parts is a gamble I would not be interested in taking.
1975 Superstar Wagon
1984 GL-10 Turbo-Traction Wagon & Hardtop
1987 & '87.5 RX coupes
1987 RX Type-RA
2002 WRX sedan
2019 Outback 2.5i Limited
JimBos Legacy
First Gear
Posts: 94
Joined: Fri Nov 17, 2017 2:16 am

Re: Robtune 550cc

Post by JimBos Legacy »

carfreak85 wrote:
JimBos Legacy wrote:If I were to run 550cc Top feed injectors, instead of running the adapters for the yellow top side feed injectors, would the 550 tune still work? I found some 550cc top feed injectors online awhile searching around.
The tune was developed with a specific set of hardware in mind. Deviating from that exact list of parts is a gamble I would not be interested in taking.
That’s why I’m thinking I’m going to go with Robs adapters that he sells, he mentions that deatschwerks work aswell, but are a bit more pricy.


Sent from my iPhone using Tapatalk
JimBo

1992 JDM Subaru Legacy GT wagon
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Robtune 550cc

Post by mike-tracy »

What intake manifold do you currently have, Jimbo?
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
JimBos Legacy
First Gear
Posts: 94
Joined: Fri Nov 17, 2017 2:16 am

Re: Robtune 550cc

Post by JimBos Legacy »

mike-tracy wrote:What intake manifold do you currently have, Jimbo?
I don’t have the exact part number, but it’s the stock manifold on a V1 Ej20G


Sent from my iPhone using Tapatalk
JimBo

1992 JDM Subaru Legacy GT wagon
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Robtune 550cc

Post by mike-tracy »

Ahh. all you need to do to use phase 2 sidefeeds is ej25d (all years, 96-99) rails. I know you were talking about retrofitting top feeds, but Rob's conversion kit does the same thing as using ej25d rails on an ej20g manifold.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
JimBos Legacy
First Gear
Posts: 94
Joined: Fri Nov 17, 2017 2:16 am

Re: Robtune 550cc

Post by JimBos Legacy »

mike-tracy wrote:Ahh. all you need to do to use phase 2 sidefeeds is ej25d (all years, 96-99) rails. I know you were talking about retrofitting top feeds, but Rob's conversion kit does the same thing as using ej25d rails on an ej20g manifold.
Gotcha, so it’d probably just be easiest to run robs adapters. I can’t seem to find the ej25d rails anywhere, but maybe I can find them at a junk yard somewhere around here


Sent from my iPhone using Tapatalk
JimBo

1992 JDM Subaru Legacy GT wagon
Post Reply