AWIC pump replacement and Sillicone hose pipes

Front, Top, Air, Water.

Moderators: Helpinators, Moderators

Post Reply
joeynimu
In Neutral
Posts: 1
Joined: Fri Feb 07, 2020 3:19 pm

AWIC pump replacement and Sillicone hose pipes

Post by joeynimu »

Hi guys,

Recently I noticed some noise coming from underneath my passenger side wheel. On listening carefully, I saw that it was coming from the air to water intercooler pump. Upon removing and inspecting it, I found out that one of the impeller fins was broken hence the sound.

I have been looking for the pump but I can't seem to find any online. I have a guy who has an old one, but it's not going on the cheap ~ $160. I am hesitant on getting it, for it might not serve me for long.

Anyone with a lead of where I could get this kind of pump preferably new? Or has anyone used a different type of pump which fits without any heavy mods?

Below are the images of the pump

https://ibb.co/HdwzGdX
https://ibb.co/T0fvgJM
https://ibb.co/j83DWrF

I am also looking for a place where I can get silicone hose pipes for the engine; it's the 1993 ej20G version one I think. Any leads will be appreciated.
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: AWIC pump replacement and Sillicone hose pipes

Post by Legacy777 »

Welcome to the BBS.

Those are probably getting difficult to find. You may want to try replacing it with another similar pump.

I'd also suggest checking out these Facebook groups. There is a lot more activity on them compared to here.

RS Liberty Club
Legacy/Liberty gen 1 parts buy & sell page
First Gen Legacy Club 89-94
Subie Sales
SL-I (Subaru Legacy International)
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
crawlerdan
Vendor
Vendor
Posts: 402
Joined: Wed Feb 15, 2006 6:22 am

Re: AWIC pump replacement and Sillicone hose pipes

Post by crawlerdan »

i replaced mine with a bilge pump for a small boat. that was over 100k ago. cost me about 35$
georryan
Fourth Gear
Posts: 2097
Joined: Thu Oct 17, 2002 1:39 am
Location: USA Bellingham WA

Re: AWIC pump replacement and Sillicone hose pipes

Post by georryan »

I'm using a Johnson CM10P7 I believe for my AWIC setup.

I used to have the stock heat exchanger, but my intercooler wasn't staying cool enough on track days. I upgraded to a larger heat exchanger from frozenboost and things are working pretty good now.
91 Pearl White Sport Sedan
04 Java Black Pearl Forester XT
2014 Volvo S60 T5
18 KTM 1290 Adventure S

87 Grey GL-10 Sedan (so long old buddy) - donated
97 Toyota 4Runner SR5 - sold
2002 BMW r1150rt-p - sold
2004 BMW r1200ST - sold
2016 BMW r1200RS - sold
arse_sidewards
First Gear
Posts: 98
Joined: Thu Jul 21, 2016 12:17 pm

Re: AWIC pump replacement and Sillicone hose pipes

Post by arse_sidewards »

Another vote for "it's just coolant at ~14psi, use whatever pump you want"

If you must have something that comes from an automotive application then go on Rockauto and look for auxiliary pumps for vans and SUVs with rear heat.
'93, '93 and '94 Legacy L, wagons, FWD and AWD, all are NA 2.2 w/ 4EAT.
Post Reply