My rebuild is going well [vid inside]

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

morgie
Third Gear
Posts: 743
Joined: Wed Oct 30, 2002 12:55 am
Location: Quebec City / Canada
Contact:

Post by morgie »

running super well.. the power of that engine is amasing vs the boost pressure.

went to the strip wednesday .. now passing gears at 6000rpm
at only 6 psi, i did a 14.68@97.8mph (and i was launching super-slow to save the tranny a little ;) ) (1/3 the boost, but already a wrx eater ! hehe)

at 9psi, the clutch was slipping and the SDS barely tuned for it, but did a 14.34@97.4mph (and still launching super slow-mow)

i'll have to convert rear drums to disk now.. when i'll be in the 13's.. will be IMPOSSIBLE to brake before the end of the strip..
morgie
'98 4Runner V6 Manual 4x4.
Post Reply