Page 2 of 2
Posted: Thu Sep 16, 2004 3:13 am
by jake15
FYI, the wrx intercooler turbo to throttle body hose doesnt just bolt in w/ the 16g, the plastic y-pipe is too short, you would have to lengthin it somehow.
Posted: Thu Sep 16, 2004 5:44 am
by BAC5.2
There's a hose you can get from Advance that works well.
I don't have the part number on me (the hose is in the car), but it's a 1 7/8" radiator hose that has a 90 degree bend in it.
Use that from the turbo outlet to the turbo-IC pipe, and then set it up "normally"
I'll have pics up tomorrow evening.
Posted: Thu Sep 16, 2004 2:17 pm
by Warp3
don't have the part number on me (the hose is in the car), but it's a 1 7/8" radiator hose that has a 90 degree bend in it.
If you could get me that part number I'd really appreciate it, so I can drop by after work today and pick one up.
Posted: Thu Sep 16, 2004 2:20 pm
by vrg3
I think I said this in another thread too, but I found that a lower radiator hose for a 92 Jaguar XJ6 without block heater fit neatly over the stock compressor outlet and had a few useful bends in it, including a 90-degree one I think.