Page 2 of 2
rear deck lid
Posted: Fri Feb 02, 2007 6:56 am
by bepa
[quote="belladonna"]ugh...i have the tan interior...grrr...my hunt continues for the rear deck! thank you[/quote]
I have to check to see what color mine is. if I have it in tan, you can name your own price, plus shipping. D
Posted: Fri Feb 02, 2007 9:28 am
by Dynamic Entry
What kind of paint is suitable to paint the manifold like that?
Posted: Fri Feb 02, 2007 10:08 am
by Splinter
Brake caliper paint or engine enamel
Posted: Fri Feb 02, 2007 12:01 pm
by RS25
if you do paint your manifold.. make sure you cure the paint with heat.. I used the outside BBQ, cured it for 1hr30mins at 300deg celcius.. works excellent, and the paint doesn't chip nearly as easy.
Posted: Fri Feb 02, 2007 8:27 pm
by RS25
in response to some pm's about the wheels, heres some pictures of them. sorry about the quality of the photo's being as though all I have at my disposal is my camera phone.. as you can see on a few of the rims, the center section is scratched on almost every wheel, and the polished sections need to be re-polished.. nothing a little time and effort won't fix. I wasn't going to worry too much about the finish on them as I was going to use them primarily for gravel rally-x anyways..
*edit, removed pictures for wheels, to save room
Posted: Sat Feb 03, 2007 1:25 am
by RS25
slant style intercooler sold. Its in the mail, thanks for your purchase
Posted: Sun Feb 04, 2007 8:39 am
by shemoves
any interior bits? looking for the plastic piece that surrounds the shift lever.
Posted: Sun Feb 04, 2007 8:49 am
by Splinter
shift lever and trim is spoken for at this point, Ill let you know if it falls through
Posted: Sun Feb 04, 2007 7:43 pm
by americanyouth
That is a gorgeous intake - how did you clean it?
Posted: Mon Feb 05, 2007 1:03 am
by RS25
americanyouth wrote:That is a gorgeous intake - how did you clean it?
a HELL of a lot of elbow grease, w/superclean, small wire brush, time, and patience
.
but thanks for the comment
Posted: Wed Feb 07, 2007 6:23 am
by tris91ricer
if you are still planning on coming to the meet, I'll give you asking price for the red manifold. just a question, though: does it really work with legacy turbo stuff? Only works with dohc, too, right?
Posted: Wed Feb 07, 2007 7:04 am
by Splinter
The red manifold only works with RS25 heads as far as I know
Posted: Thu Feb 08, 2007 9:41 am
by RS25
yes, the red manifold only works with the DOHC EJ25 N/A heads..
essentially, this is the intake manifold that you read about on this cite for doing the ej22t dohc swap..
Posted: Thu Feb 08, 2007 11:16 pm
by tris91ricer
mmmmm. . . Nevermind, then
Posted: Sat Feb 17, 2007 1:59 am
by RS25
wheels are sold on Nasioc.. and.. bump.. we need to get rid of this stuff
Posted: Sat Feb 17, 2007 7:58 pm
by shemoves
willing to sell just the MAF sensor?
Posted: Mon Feb 19, 2007 9:02 pm
by BSOD2600
Do you have the stock BOV I could get for my 94 turbo legacy?
Posted: Sat Feb 24, 2007 7:50 pm
by boro
condition/miles on the heads?
and shipping to 63043 USA if you please.
THANKS!
Posted: Sun Feb 25, 2007 5:21 am
by RS25
BSOD2600.. I'm sure we could accomidate you for the Bypass Valve.. I know I've got 2 of them and Splinter I believe has one
Boro.. Condition of the heads are.. Leaking oil as per usual, mine have 200Km's on them and are in good shape. They were taken off of my donor block in good running condition. They are complete, heads, cam, valve covers, etc.. I'll try and find out about shipping next week.. (prolly either mon-wed) unless there is a rush on them.