Page 2 of 2
Posted: Thu Oct 30, 2008 9:58 am
by kimokalihi
I was trying to steer away from the WRX exhausts because I want it to fit the car perfectly and have plenty of clearence. I do not have a nice welder. My step dad has a lincoln electric harbor freight wire feed welder. And I'm not good at welding due to the fact that I've only done it about twice before. Without any help or pointers from someone who actually knew how to weld.
Do you really think that borla muffler would be hard to fit? I need to take a look under there.
Posted: Fri Jan 09, 2009 8:14 pm
by chiplrx-sli
i add to the cherry bomb idea i had one on a na ej22 and it sounded mean
Posted: Fri Jan 09, 2009 11:44 pm
by LegacyT
Posted: Mon Mar 23, 2009 4:07 am
by Apex3
Magnaflow is garbage, there's more to it than sound and performance. And assuming you can't weld it yourself, you aren't saving much money once you get it all welded up.
Posted: Mon Mar 23, 2009 4:28 am
by beatersubi
Apex3 wrote:Magnaflow is garbage, there's more to it than sound and performance.
Elaborate.
Posted: Mon Mar 23, 2009 6:16 am
by Apex3
beatersubi wrote:Apex3 wrote:Magnaflow is garbage, there's more to it than sound and performance.
Elaborate.
Quality? I had a magnaflow cat, it was made of cheesy metal, and the heatshield started rattling within months, I ended up just taking out the cat completely.
Posted: Mon Mar 23, 2009 7:37 pm
by beatersubi
Good to know. Was it at least priced reasonably?
I have a magnaflow muffler that was cheap from summit that's never had any issues.
Posted: Mon Jun 22, 2009 3:52 pm
by SPUMONI_RT
the boxer engine sounds good with no muffler nor resonators. It's all personal choice. Your best bet buy a fart can those ricer mufflers from ebay for 30$ you can get lots of different styles. I have a cheap strait through muffler with silencer. Lots of silencers are tuneable, so you get get the tone your looking for.
Posted: Thu Jun 25, 2009 9:27 am
by A1Fiddler
I'm running an STI muffler on mine. It's quiet until you get on it, then it sounds real nice.
Posted: Sat Jun 27, 2009 3:27 am
by shtbxr22
here is what a super 44 flowmaster sounds like with the rest of the exhaust stock:
http://www.youtube.com/watch?v=cOegSX6seOg
Posted: Sun Jun 28, 2009 5:20 am
by Bdub
I just put an SPT axle back on in place of my Flowmaster. Holy crap, I can hear again!
I loved the loudness of the Flowmaster, but it was getting to the point where it would just drone on long drives and give me a headache. The SPT is loud when you punch it, but otherwise just deep and mellow.
Posted: Sun Jun 28, 2009 1:50 pm
by shtbxr22
I used a tip to get rid of the drone. the key is to have the outlet exit just behind the last part of the rear bumper. before I put the tip on I could barely talk to someone inside the car. don't worry though, it was a tip I chopped off of an 06 impreza, and welded on.
Posted: Sun Jun 28, 2009 2:39 pm
by fishbone79
^^ Yes! Mine pokes out about 4" past the bumper, I was surprised what a huge difference that made.
Posted: Sun Jun 28, 2009 10:38 pm
by shtbxr22
4"? wow. that's alot.
Posted: Sun Jun 28, 2009 11:38 pm
by fishbone79
Yeah, it was a 'miscalculation' when I welded it up... the 3" tailpipe is cut on a 45 though, so the bottom only clears by an inch or so.
